A hw decoder might fail to decode a frame for multiple reasons, and not
always just because decoding is impossible. We can't generally
distinguish these reasons well. Make it more tolerant by accepting
failures of 3 frames, but not more. The threshold can be adjusted by the
repurposed --vd-lavc-software-fallback option.
(This behavior was suggested much earlier in some PR, but at the time
the "proper" hwdec fallback was indistinguishable from decoding error.
With the current situation, "proper" fallback is still instantious.)
Thanks to rcombs, ffmpeg now properly supports DASH and we can
remove our hacks for it and use it by default whenever
available. If you don't like this for whatever reason, you
can get the "normal" streams back with --ytdl-format=best .
Closes#579Closes#1321Closes#2359
libass 0.13.0 breaks this due to removal of fontconfig from its core
(instead, fontconfig is one possible backend, and pattern lookup is
apparently not possible anymore).
Useless. Sometimes it might be useful to make some extremely broken
files work, but on the other hand --no-correct-pts is sufficient for
these cases.
While we still need some of the code for AVI, the "auto" mode in
particular inflated the size of the code.
The manpage entry explains this.
(Maybe this option could be always enabled and removed. I don't quite
remember what valid use-cases there are for just disabling audio
entirely, other than that this is also needed for audio decoder init
failure.)
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
This doesn't work too well if sections of the file change to a different
framerate. It lowers our chances to guess the correct FPS in the display
sync code.
For normal playback, this (probably) doesn't help that much anyway,
except that the "estimated-vf-fps" property will regress in the simplest
mkv case. This will be fixed with the next commit.
The now disabled code will probably be removed; it's not useful anymore.
Add --demuxer-max-packets and --demuxer-max-bytes, which control the
maximum size of the packet queue. These can be helpful to avoid
excessive memory usage.
Memory usage is the reason why there's a limit in the first place. If a
file is more or less broken, and audio and video don't line up, the
decoders will fill up the packet queue trying to read more audio or
video, and the maximum sizes are required to avoid unbounded memory
allocation. Being able to override the maximum sizes is useful; either
for restricting memory usage further, or enlarging the sizes when
attempting to play various broken files.
Remove --demuxer-readahead-packets and --demuxer-readahead-bytes. These
were a bit useless. They could force a minimum packet queue size, but
controlling the queue size with --demuxer-readahead-secs is much nicer.
It's fairly certain nobody ever used these options.
For now, it needs to be explicitly selected. ENCA is still the default.
This assumes uchardet returns iconv names. This doesn't seem to be
always the case, and the result are lots of iconv errors. So
explicitly check for this situation, and print a warning if it
occurs. It's entirely possible that uchardet support is actually
useless, because names are not necessarily iconv-compatible (but
uchardet doesn't seem to document whether it attempts to return
iconv-compatible names if possible).
Fixes#908.
This is an unfortunate fact of life. Maybe making this the default
wasn't such a good idea after all.
Also update etc/example.conf. It used an obsolete alias for "auto".
Allow setting an arbitrary amount, instead of the fixed 50%.
This is nto striclty backwards compatible. The defaults don't change,
but the --cache/--cache-default options now set the readahead portion.
So in practice, users who configured this until now will see the
double amount of cache being used, _plus_ the 75MB default backbuffer
will be in use.
Probably makes users happy who want bitmap subtitles to show up in the
screen margins, and stops them from doing idiotic crap with vf_expand.
Fixes#2098.
Extend the --demuxer-mkv-probe-video-duration behavior to work with
files that are partial and are missing an index. Do this by finding a
cluster 10MB before the end of the file, and if that fails, just read
the entire file. This is actually pretty trivial to do and requires only
5 lines of code.
Also add a mode that always reads the entire file to estimate the video
duration.
Until now, if a stream wasn't seekable, but the stream cache was enabled
(--cache), we've enabled seeking anyway. The idea was that at least
short seeks would typically fall within the cache. And if not, the user
was out of luck and terrible things happened. In other words, it was
unreliable.
Be stricter about it and remove this behavior. Effectively, this will
for example disable seeking in piped data.
Instead of trying to be clever, add an --force-seekable option, which
will always enable seeking if the user really wants it.
See manpage additions. This is mainly useful for vo_opengl_cb, but can
also be applied to vo_opengl.
On a side note, gl_hwdec_load_api() should stop using a name string, and
instead always use the IDs. This should be cleaned up another time.
This provides a new method for enabling spdif passthrough. The old
method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated
method will probably stop working at some point.
This also supports PCM fallback. One caveat is that it will lose at
least 1 audio packet in doing so. (I don't care enough to prevent this.)
(This is named after the old S/PDIF connector, because it uses the same
underlying technology as far as the higher level protoco is concerned.
Also, the user should be renamed that passthrough is backwards.)
This brings the volume control closer to what is percepted as linear
volume change.
Adjust the --softvol-max default to roughly the old maximum (roughly
doubles the gain).
Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
This creates the window before the first file is loaded. This was
requested a bunch of times, but on the other hand a change to make this
behavior the default was reverted some time ago, because other users
hated it.
This should take care of the endless complaints about the default
location for screenshots (and will of course create new ones).
If the screenshot-template is set to an absolute path, the directory
won't be used. So this should be reasonably compatible.
So that the user realizes where they come from, or can find them at all.
This was a common complaint, and this is the most lazy solution. Better
suggestions for a default template are welcome.
This was in the "Window" section. It has absolutely nothing to do with
windows. Move it to the "Miscellaneous" section instead. The "--mc"
option, which has a similar function, was already there.
It seems this choice was never documented. "always" is actually older
than "yes", so just declare it a compatibility value for "yes". (Also
move it before "always" in the C code to make this clear.)
I tried to find that option by searching for terms like “cover art”
and got nothing. I imagine most users would look for similar terms.
Hope this helps.
There still might be FFmpeg demuxers which mess up if audio is disabled
(like it happened to the FLV demuxer), but these are bugs and shouldn't
happen.
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
Why did this exist in the first place? Other than being completely
useless, this even caused some regressions in the past. For example,
there was the case of a laptop exposing its accelerometer as joystick
device, which led to extremely fun things due to the default mappings of
axis movement being mapped to seeking.
I suppose those who really want to use their joystick to control a media
player (???) can configure it as mouse device or so.
I think this is what I alwass missed ever since I found the MPlayer
cache options: a way to enable the cache on local files with the default
settings, whatever they are.
Breaks vo_opengl by default. I'm hot able to fix this myself, because I
have no clue about the overcomplicated color management logic. Also,
whilethis is apparently caused by commit fbacd5, the following commits
all depend on it, so revert them too.
This reverts the following commits:
e141caa97d653b0dd529729c8b3f64fbacd5de31Fixes#1636.
This relies on upstream support in lavc, and will hence basically not
work at all. The intent is to get support for writing this information
into ffmpeg's PNG encoders etc.
Now that we have fast stream switching, we can bump these sizes, as the
queues cause no delay in switching anymore.
Of course, the fast stream switching works for mkv and mp4 only. Other
formats will incur a quite terrible delay especially in network mode,
which this commit changes to 10 seconds. Let's see if someone
complains...
The way I interpreted it, it seemed like this was not default behavior
and could be enabled with --audio-pitch-correction - it should be made
clearer that this is actually *the default behavior*.
This option allows the user to pass non-supported options directly to
youtube-dl, such as "--proxy URL", "--username USERNAME" and
'--password PASSWORD".
There is no sanity checking so it's possible to break things (i.e.
if you pass "--version" mpv exits with random JSON error).
Signed-off-by: wm4 <wm4@nowhere>
Now --ass-use-margins doesn't apply to normal subtitles anymore. This is
probably the inverse from the mpv behavior users expected so far, and
thus a breaking change, so rename the option, that the user at least has
a chance to lookup the option and decide whether the new behavior is
wanted or not.
The basic idea here is:
- plain text subtitles should have a certain useful defalt behavior,
like actually using margins
- ASS subtitles should never be broken by default
- ASS subtitles should look and behave like plaintext subtitles if
the --ass-style-override=force option is used
This also subtly changes --sub-scale-with-window and adds the --ass-
scale-with-window option. Since this one isn't so important, don't
bother with compatibility.
You can set in which "corner" the OSD and subtitles are shown. I'd
prefer it a bit more general (so you could set the alignment using
a factor), but the libass API does not provide this.
Requested. See manpage additions.
This also makes the magical loop_times constants slightly saner, but
shouldn't change the semantics of any existing --loop option values.
In my opinion the artifacts created by af_scaletempo on extreme slowdown
(50% or so) are too bothersome - but users disagree. So use
af_scaletempo on any speed changes, not just on speedup.
Make it accept "," as separator, instead of only ":". Do this by using
the key-value-list parser. Before this, the option was stored as a
string, with the option parser verifying that the option value as
correct. Now it's stored pre-parsed, although the log levels still
require separate verification and parsing-on-use to some degree (which
is why the msg-level option type doesn't go away).
Because the internal type changes, the client API "native" type also
changes. This could be prevented with some more effort, but I don't
think it's worth it - if MPV_FORMAT_STRING is used, it still works the
same, just with a different separator on read accesses.
Autoload external audio files only if there's at least a video track
(which is not coverart pseudo-video).
Enable external audio file autoloading by default. Now that we actively
avoid doing stupid things like loading an external audio file for an
audio-only file, this should be fine.
Additionally, don't autoload subtitles if a subtitle is played.
Although you currently can't play subtitles without audio or video,
it's disturbing and stupid that the player might load subtitle files
with different extension and then fail.
This allows getting the log at all with --no-terminal and without having
to retrieve log messages manually with the client API. The log level is
hardcoded to -v. A higher log level would lead to too much log output
(huge file sizes and latency issues due to waiting on the disk), and
isn't too useful in general anyway. For debugging, the terminal can be
used instead.
The previous default ("no") seemed to be equivalent to "min" in practice
(though it might depend on the website, which is even worse).
Better just select the best stream by default.
Fixes#1472.
(Maybe these options should have been named --autofit-max and
--autofit-min, but since --autofit-larger already exists, use
--autofit-smaller for symmetry.)
Seems to work with GtkSocket and passing the gtk_socket_get_id() value
via "wid" option to mpv.
One caveat is that using <tab> to move input focus from mpv to GTK does
not work. It seems we would have to interpret <tab> ourselves in this
case. I'm not sure if we really should do this - it would probably
require emulating some other typical conventions too. I'm not sure if an
embedder could do something about this on the toolkit level, but in
theory it would be possible, so leave it as is for now.
Remove the "all" special-behavior, and instead interpret trailing "*"
characters. --display-tags=all is replaced by --display-tags=* as a
special-case of the new behavior.
See #1404.
Note that the most straight-forward value for matchlen in the normal
case would be INT_MAX, because it should be using the entire string.
I used keylen+1 instead, because glibc seems to handle this case
incorrectly:
snprintf(buf, sizeof(buf), "%.*s", INT_MAX, "hello");
The result is empty, instead of just containing the string argument.
This might be a glibc bug; it works with other libcs (even MinGW-w64).
Was already possible before by injecting the magic PID
8192 into channels.conf, the flag makes this much more
useable and we also have it documented.
Useful not only for debugging, but also for incomplete
channels.conf (mplayer format...), multi-channel
recording, or channels which do dynamic PID switchng.
full-transponder is also useful for channels which switch PIDs on-the-fly.
ffmpeg can handle this, but it needs the full stream with all PIDs.
--sub-scale-by-window=no attempts to keep subs always at the same pixel
size.
The implementation is a bit all over the place, because it compensates
already done scaling by an inverse scale factor, but it will probably do
its job.
Fixes#1424. (The semantics and name of --sub-scale-with-window are
kept, and this adds a new option - the name is confusingly similar, but
it's actually analogue to --osd-scale-by-window.)
Options which take colors accept two variants. The first is "r/g/b/a",
the second is "#AARRGGBB". Since they put alpha at different places,
it's probably better to document the second variant explicitly. (It's a
bit strange that they put alpha in different places, but on the other
hand, it's kind of natural. The second variant should probably be
considered deprecated.)
This attempts to increase user-friendliness by excluding useless tags.
It should be especially helpful with mp4 files, because the FFmpeg mp4
demuxer adds tons of completely useless information to the metadata.
Fixes#1403.
Until now, these options took effect only at program start. This could
be confusing when e.g. doing "mpv list.m3u --shuffle". Make them always
take effect when a playlist is loaded either via a playlist file, or
with the "loadlist" command.
This should work well with most audio APIs, except ALSA. A long-winded
explanation is provided how to make ALSA multichannel output work.
All other AOs should have no such problems. Of course it's possible
that previously unknown issues arise, because I assume that enabling
multichannel audio is actually relatively rare.
This also disables codec downmix by default, which could change the
audio output due to different mixing in the codec and libavresample.
Fixes#1313.
- --lua and --lua-opts change to --script and --script-opts
- 'lua' default script dirs change to 'scripts'
- DOCS updated
- 'lua-settings' dir was _not_ modified
The old lua-based names/dirs still work, but display a warning.
Signed-off-by: wm4 <wm4@nowhere>
The --keep-open behavior was recently changed to act only on the last
file due to user requests (see commit 735a9c39). But the old behavior
was useful too, so bring it back as an additional mode.
Fixes#1332 (or rather, should help with it).
Makeshift-solution for working around certain fontconfig issues.
With --use-text-osd=no, libass and fontconfig won't be initialized, and
fontconfig won't block everything with scanning for fonts.
It's passed with the '--format' option to youtube-dl.
If it isn't set, we don't pass '--format best' so that youtube-dl can
use the options from its configuration file.
Signed-off-by: wm4 <wm4@nowhere>
Probably needs to be polished a bit more. Also, might require a key
binding that can set/clear the loop points in a more intuitive way.
For now, something like this can be put into input.conf to use it:
ctrl+y set ab-loop-a ${time-pos} # set A
ctrl+x set ab-loop-b ${time-pos} # set B
ctrl+c set ab-loop-a no # clear (mostly)
Fixes#1241.
Make the changes started in commit c827ae5f more eloborate, and provide
an option to control the amount of data read before the seek-target. To
achieve this, rewrite the loop that finds the lowest still acceptable
target cluster. It is now searched by time instead of file position. The
behavior (both with and without preroll option) may be different from
before this change, although it shouldn't be worse.
The change demux_mkv_read_cues() fixes a bug: when seeking after playing
normally, the code would erroneously assume that durations are set. This
doesn't happen if the first operation after loading was a seek instead
of playback.
The main need I see for this is with libmpv - it would be confusing if
some application showed up as "mpv" on whateverthehell PulseAudio uses
it for (generally it does show up on various PA GUI tools).
Note that you can't pass .cue or .edl files to it, at least not yet.
Requested in context of allowing to specify custom chapters. For that
to work well, we probably need to add some sort of chapter metadata
pseudo-demuxer.
Using the --playlist option is no longer recommended.
A while ago, mpv rewrote all playlist parsers and added some minimal
security mechanisms (like not allowing local file access or unsafe
protocols in remote playlists). Further, mpv can load playlists by
passing them as normal file arguments, without the option.
Now, --playlist is needed only in these situations:
1) loading plaintext files
2) disabling additional security mechanisms
(e.g. using a remote playlist to play local files)
This is probably what libmpv users want; and it also improves error
reporting (or we'd have to add a way to communicate such mid-playback
failures as events).
At least on my machine, reading back the frame with system memcpy is
slower than just using software rendering. Use the optimized gpu_memcpy
from LAV to speed things up.
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
Windows doesn't have unix domain sockets, and can't handle sockets and
pipes in an uniform way. Only the libwaio fallback code is available,
which doesn't do JSON.
Now requires newest libass git. Since this feature wasn't part of a
libass release yet, I'm not bothering making the mpv code compatible
with as how it was previously implemented (it will just be disabled
with any older libass).
CC: @mpv-player/stable (because mpv-build uses libass git, and this
breaks the feature)
This reverts commit 45c8b97efb.
Some else complained (github issue #1163).
The feature requested in #1148 will be implemented differently in
the following commit.
The event monitor is used to get keyboard events when there is no window, but
since it is a global monitor to the current process, we don't want it in a
library setting.
After @frau's split of macosx_events from macosx_application, `is_cplayer' is
not needed anymore. At the moment only global events such as Media Keys and
Apple Remote work, because the VO-level ones were hardcoded to be disabled.
(that will be fix in a later commit ).
Now any action that stops playback of a file (even playlist navigation)
will save the position. Normal EOF is of course excluded from this, as
well as commands that just reload the current file.
The option name is now slightly off, although you could argue what the
word "quit" means.
Fixes#1148 (or at least this is how I understood it).
This is the first of a series of commits that will change the Cocoa way in a
way that is easily embeddable inside parent views. To reach that point common
code must avoid referencing the parent NSWindow since that could be the host
application's window.
--x11-netwm=yes now forces NetWM fullscreen, while --x11-netwm=auto
(detect whether NetWM fullsctreen support is available) is the old
behavior and still the default.
See #888.
Apparently this is what users want. When playing with normal speed,
nothing is done. When playing slower than normal, resampling is used
instead, because scaletempo (which does the pitch correction) adds
too many artifacts.
This would play some silence in case video was slower than audio. If
framedropping is already enabled, there's no other way to keep A/V
sync, short of changing audio playback speed (which would give worse
results). The --audiodrop option inserted silence if there was more
than 500ms desync.
This worked somewhat, but I think it was a silly idea after all. Whether
the playback experience is really bad or slightly worse doesn't really
matter. There also was a subtle bug with PTS handling, that apparently
caused A/V desync anyway at ridiculous playback speeds.
Just remove this feature; nobody is going to use it anyway.
Commit 64b7811c tried to do the "right thing" with respect to whether
keyboard input should be enabled or not. It turns out that X11 does
something stupid by design. All modern toolkits work around this native
X11 behavior, but embedding breaks these workarounds.
The only way to handle this correctly is the XEmbed protocol. It needs
to be supported by the toolkit, and probably also some mpv support. But
Qt has inconsistent support for it. In Qt 4, a X11 specific embedding
widget was needed. Qt 5.0 doesn't support it at all. Qt 5.1 apparently
supports it via QWindow, but if it really does, I couldn't get it to
work.
So add a hack instead. The new --input-x11-keyboard option controls
whether mpv should enable keyboard input on the X11 window or not. In
the command line player, it's enabled by default, but in libmpv it's
disabled.
This hack has the same problem as all previous embedding had: move the
mouse outside of the window, and you don't get keyboard input anymore.
Likewise, mpv will steal all keyboard input from the parent application
as long as the mouse is inside of the mpv window.
Also see issue #1090.
For a while, we used this to transfer PCM from demuxer to the filter
chain. We had a special "codec" that mapped what MPlayer used to do
(MPlayer passes the AF sample format over an extra field to ad_pcm,
which specially interprets it).
Do this by providing a mp_set_pcm_codec() function, which describes a
sample format in a generic way, and sets the appropriate demuxer header
fields so that libavcodec interprets it correctly. We use the fact that
libavcodec has separate PCM decoders for each format. These are
systematically named, so we can easily map them.
This has the advantage that we can change the audio filter chain as we
like, without losing features from the "rawaudio" demuxer. In fact, this
commit also gets rid of the audio filter chain formats completely.
Instead have an explicit list of PCM formats. (We could even just have
the user pass libavcodec PCM decoder names directly, but that would be
annoying in other ways.)
E.g. --loop-file=2 will play the file 3 times (one time normally, and 2
repeats).
Minor syntax issue: "--loop-file 5" won't work, you have to use
"--loop-file=5". This is because "--loop-file" still has to work for
compatibility, so the "old" syntax with a space between option name and
value can't work.
It's just confusing; users are encouraged to edit input.conf instead
(changing the argument to the "add" command).
Update input.conf to keep the old behavior.
vo_vdpau uses its own framedrop code, mostly for historic reasons. It
has some tricky heuristics, of which I'm not sure how they work, or if
they have any effect at all, but in any case, I want to keep this code
for now. One day it might get fully ported to the vo.c framedrop code,
or just removed.
But improve its interaction with the user-visible framedrop controls.
Make --framedrop actually enable and disable the vo_vdpau framedrop
code, and increment the number of dropped frames correctly.
The code path for other VOs should be equivalent. The vo_vdpau behavior
should, except for the improvements mentioned above, be mostly
equivalent as well. One minor change is that frames "shown" during
preemption are always count as dropped.
Remove the statement from the manpage that vo_vdpau is the default; this
hasn't been the case for a while.
Until now, you could override only level 3 with --osd-status-msg. Extend
this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD
level 0 always means disable OSD, so that isn't included.
--osd-msg3 corresponds to --osd-status-msg, but they're not exactly the
same. To allow more customization, --osd-msgN do not include the OSD
symbol. The symbol can be manually added with "${osd-sym-cc}". We keep
the "old" option for some short-term compatibility.
--osd-msg1 should be particularly useful; for example you could do:
--osd-msg1='${?pause==yes:${osd-sym-cc}}'
to display a "paused" symbol when paused, and nothing during normal
playback. (Although admittedly, the syntax is quite a bit of work.)
With default settings, this allows you to hit the 100% mark (with
default --softvol-max in the middle) even if you've reached min or max
volume before. This is because 50 is not divisible by 3 (old default)
but by 2 (new default).
Not really sure why there still can be issues with higher --softvol-max
and --volstep=1, but this is where I stop caring.
This was kept in the codebase because it is slightly faster than --vo=opengl
on really old Intel cards (from the GMA era). Time to kill it, and let it rest.
Fixes#1061
The Windows version of tmpfile is actually pretty broken. It tries to
create the file in the root directory of the current drive, which means
on Vista and up, it normally fails due to insufficient permissions.
Replace it with a version that uses GetTempPath.
Also remove the Windows-specific note about automatic deletion of the
cache file. FILE_FLAG_DELETE_ON_CLOSE is available in NT, and it should
be pretty reliable.
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
Until now, you had to use --load-unsafe-playlists or --playlist to get
playlists loaded. Change this and always load playlists by default.
This still attempts to reject unsafe URLs. For example, trying to invoke
libavdevice pseudo-demuxer is explicitly prevented. Local paths and any
http links (and some more) are always allowed.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
Since we have to be portable, our options for creating temporary files
are somewhat limited. tmpfile() happens to be available everywhere, so
use that. This function doesn't allow having a "visible" filename or
location, so we use the magic string "TMP" for this.
A (hopefully) temporary hack to make stream switching delays tolerable.
It's not clear how this should be handled (either executing a precise
seek on track switching, or always enabling all streams), so get this
issue out of the way for now by picking a rather low value.
Add the --cache-secs option, which literally overrides the value of
--demuxer-readahead-secs if the stream cache is active. The default
value is very high (10 seconds), which means it can act as network
cache.
Remove the old behavior of trying to pause once the byte cache runs
low. Instead, do something similar wit the demuxer cache. The nice
thing is that we can guess how many seconds of video it has cached,
and we can make better decisions. But for now, apply a relatively
naive heuristic: if the cache is below 0.5 secs, pause, and wait
until at least 2 secs are available.
Note that due to timestamp reordering, the estimated cached duration
of video might be inaccurate, depending on the file format. If the
file format has DTS, it's easy, otherwise the duration will seemingly
jump back and forth.
--demuxer-readahead-secs now controls how much the demuxer should
readahead by an amount of seconds. This is based on the raw packet
timestamps. It's not always very exact. For example, h264 in Matroska
does not store any linear timestamps (only PTS values which are going
to be reordered by the decoder), so this heuristic is usually off by
several hundred milliseconds.
The decision whether to readahead is basically OR-ed with the other
--demuxer-readahead-packets options. Change the manpage descriptions
to subtly convey these semantics.
Since the display FPS is currently detected on X11 only (and even there
it's known to be wrong on certain setups), it seems like a good idea to
make this user-configurable.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
Completely useless, and could accidentally be enabled by cycling
framedrop modes. Just get rid of it.
But still allow triggering the old code with --vd-lavc-framedrop, in
case someone asks for it. If nobody does, this new option will be
removed eventually.
Split the options into the following sections:
* Playback Control
* Program Behaviour
* Video
* Audio
* Subtitles
* Window
* Disc Devices
* Equalizer
* Demuxer
* Input
* OSD
* Screenshot
* Software Scaler
* Terminal
* TV
* Cache
* Network
* DVB
* PVR
* Miscellaneous
Most options are sorted by usefullness and how often they're used or how
important they are.
This makes finding the right options easier and adds some sort of structure.
Handle --term-playing-msg at a better place.
Move MPV_EVENT_TICK hack into a separate function. Also add some words
to the client API that you shouldn't use it. (But better leave breaking
it for later.)
Handle --frames and frame_step differently. Remove the mess from the
playloop, and do it after frame display. Give up on the weird semantics
for audio-only mode (they didn't make sense anyway), and adjust the
manpage accordingly.
Almost nothing was left of it.
The only thing this commit actually removes is support for reading
input commands from stdin. But you can emulate this via:
--input-file=/dev/stdin --input-terminal=no
However, this won't work on Windows. Just use a named pipe.
