If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
For video sync, we want separate playback speed controls for user-
requested speed and the "correction" speed for video timing. Further, we
use this separation to make sure only a resampler is inserted if
playback speed is only changed for video sync correction.
As of this commit, this is basically inactive code. It's just
preparation for the video sync code (the following commit).
This doesn't work too well if sections of the file change to a different
framerate. It lowers our chances to guess the correct FPS in the display
sync code.
For normal playback, this (probably) doesn't help that much anyway,
except that the "estimated-vf-fps" property will regress in the simplest
mkv case. This will be fixed with the next commit.
The now disabled code will probably be removed; it's not useful anymore.
Removes some more internal API calls from the Lua scripting backend.
Which is good, because ideally the scripting backend would use libmpv
functions only.
One awkwardness is that mouse sections are still not supported by the
public commands (and probably will never), so flags like allow-hide-
cursor make no sense to an outside user.
Also, the way flags are passed to the Lua function changes. But that's
ok, because they're only undocumented internal functions, and not
supposed to be used by script users. osc.lua only does due to historical
reasons.
This was requested. It was more or less present internally already and
used for Lua scripting. Lua will switch to the "public" functions in
the following commits.
Add --demuxer-max-packets and --demuxer-max-bytes, which control the
maximum size of the packet queue. These can be helpful to avoid
excessive memory usage.
Memory usage is the reason why there's a limit in the first place. If a
file is more or less broken, and audio and video don't line up, the
decoders will fill up the packet queue trying to read more audio or
video, and the maximum sizes are required to avoid unbounded memory
allocation. Being able to override the maximum sizes is useful; either
for restricting memory usage further, or enlarging the sizes when
attempting to play various broken files.
Remove --demuxer-readahead-packets and --demuxer-readahead-bytes. These
were a bit useless. They could force a minimum packet queue size, but
controlling the queue size with --demuxer-readahead-secs is much nicer.
It's fairly certain nobody ever used these options.
Drop d for toggling framedrop. Toggling this is way too special to be at
such a prominent place, and in fact I believe toggling it is pointless.
Remap deinterlacing from D to d. It's relatively useful and non-
destructive.
As suggested in #973 (almost).
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
For now, it needs to be explicitly selected. ENCA is still the default.
This assumes uchardet returns iconv names. This doesn't seem to be
always the case, and the result are lots of iconv errors. So
explicitly check for this situation, and print a warning if it
occurs. It's entirely possible that uchardet support is actually
useless, because names are not necessarily iconv-compatible (but
uchardet doesn't seem to document whether it attempts to return
iconv-compatible names if possible).
Fixes#908.
See manpage additions.
The main reason for adding this is that we can't guess whether the user
wants his config in his Windows profile or not. The user basically has
to tell mpv what should be done, and the "portable_config" directory
does this implicitly.
Fixes#2042 (approximately).
This is an unfortunate fact of life. Maybe making this the default
wasn't such a good idea after all.
Also update etc/example.conf. It used an obsolete alias for "auto".
Allow setting an arbitrary amount, instead of the fixed 50%.
This is nto striclty backwards compatible. The defaults don't change,
but the --cache/--cache-default options now set the readahead portion.
So in practice, users who configured this until now will see the
double amount of cache being used, _plus_ the 75MB default backbuffer
will be in use.
Probably makes users happy who want bitmap subtitles to show up in the
screen margins, and stops them from doing idiotic crap with vf_expand.
Fixes#2098.
Normally, vdpau decoded frames are passed directly to a suitable
vo (vo_vdpau or vo_opengl) without ever touching system memory. This
is efficient for output purposes, but prevents any of the regular
filters from being used with such frames.
This new filter implements a read-back step to pull the frames back
into system memory where they can be acted on by other filters.
Eventually the frames will be sent to the vo as if they were normal
software-decoded frames.
Note that a vdpau compatible vo must still be used to ensure that
the decoder is properly initialised.
Signed-off-by: wm4 <wm4@nowhere>
Extend the --demuxer-mkv-probe-video-duration behavior to work with
files that are partial and are missing an index. Do this by finding a
cluster 10MB before the end of the file, and if that fails, just read
the entire file. This is actually pretty trivial to do and requires only
5 lines of code.
Also add a mode that always reads the entire file to estimate the video
duration.
Until now, if a stream wasn't seekable, but the stream cache was enabled
(--cache), we've enabled seeking anyway. The idea was that at least
short seeks would typically fall within the cache. And if not, the user
was out of luck and terrible things happened. In other words, it was
unreliable.
Be stricter about it and remove this behavior. Effectively, this will
for example disable seeking in piped data.
Instead of trying to be clever, add an --force-seekable option, which
will always enable seeking if the user really wants it.
See manpage additions. This is mainly useful for vo_opengl_cb, but can
also be applied to vo_opengl.
On a side note, gl_hwdec_load_api() should stop using a name string, and
instead always use the IDs. This should be cleaned up another time.
If the request contains a "request_id", copy it back into the
response. There is no interpretation of the request_id value by mpv; the
only purpose is to make it easier on the requester by providing an
ability to match up responses with requests.
Because the IPC mechanism sends events continously, it's possible for
the response to a request to arrive several events after the request was
made. This can make it very difficult on the requester to determine
which response goes to which request.
Until now, this was for AC3 only. For PCM, we used AudioUnit in
ao_coreaudio, and the only reason ao_coreaudio_exclusive exists
is that there is no other way to passthrough AC3.
PCM support is actually rather simple. The most complicated
issue is that modern OS X versions actually do not support
copying through the data; instead everything must go through
float. So we have to deal with virtual and physical format
being different, which causes some complications.
This possibly also doesn't support some other things correctly.
For one, if the device allows non-interleaved output only, we
will probably fail. (I couldn't test it, so I don't even know
what is required. Supporting it would probably be rather
simple, and we already do it with AudioUnit.)
This should make interpolation work much better in general, although
there still might be some side effects for unusual framerates (eg. 35 Hz
or 48 Hz). Most of the common framerates are tested and working fine.
(24 Hz, 30 Hz, 60 Hz)
The new code doesn't have support for oversample yet, so it's been
removed (and will most likely be reimplemented in a cleaner way if
there's enough demand). I would recommend using something like robidoux
or mitchell instead of oversample, though - they're much
smoother for the common cases.
At least Matroska files have a "forced" flag (in addition to the
"default" flag). Export this flag. Treat it almost like the default
flag, but with slightly higher priority.
We want to distinguish actual errors, and just aborting the program
intentionally.
Also be a bit more careful with handling the wait() exit status: do not
called WEXITSTATUS() without checking WIFEXITED() first.
DVD/BD menu support never worked right, and are a pain to maintain. In
particular, DVD menus never actually worked correctly, because
highlights were not rendered correctly. Fixing this requires major
effort, which I'm not interested to spend.
Most importantly, the requirement to switch streams without losing the
DVD/BD state caused major weirdness in the playback core. It was
implemented by somehow syncing the playback state to the DVD/BD
implementation (in stream_dvdnav.c etc.), and then reloading the demuxer
without destroying and recreating the stream. This caused a bunch of
special-cases which I'm looking forward to remove.
For now, don't just remove everything related to menu support and just
disable it. If someone volunteers, it can be restored (i.e. rewritten)
in a reasonable way. If nobody volunteers soon, it goes.
So successful playback and user quit can be distinguished, for whatever
reason you may want to do this.
Normally, the "quit" command can be customized, but this does not work
for quit commands sent by the terminal signal handler. One solution
would be introducing something like "ON_SIGNAL" (equivalent to
"CLOSE_WIN"), but considering there are a bunch of possible signals, I'd
rather not get into this. So go with the dumb solution.
Probably fixes#2029.
This provides a new method for enabling spdif passthrough. The old
method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated
method will probably stop working at some point.
This also supports PCM fallback. One caveat is that it will lose at
least 1 audio packet in doing so. (I don't care enough to prevent this.)
(This is named after the old S/PDIF connector, because it uses the same
underlying technology as far as the higher level protoco is concerned.
Also, the user should be renamed that passthrough is backwards.)
The "osd" command cycles between 4 states (OSD level 0-3), which is
probably confusing and inconvenient. OSD levels 0 and 2 are rarely
needed. I would claim there is normally not much of a need to completely
disable OSD by setting level 0 during playback. Level 2 is just slightly
less information than level 3, and I'm not sure why it exists at all.
Change it so that it toggles between level 3 and 1. Note that this
ignores the default OSD level. If the default is 3, the first use of
this key will set it to 3 again. Just assume 1 is the default. If
someone complains, this could be improved.
It polluted the global namespace, instead of exporting the function
properly.
For now, keep it compatible by explicitly keeping the bogus export.
Also fix a mistake in the manpage example.
This command has been deprecated in the 0.8.x and 0.9.x releases - get
rid of it. Its only point ever was MPlayer compatibility, which broke
years ago anyway.
They're completely orthogonal concepts, merged in the past due to
convenience and ease of implementing it in the old #ifdef hell renderer.
Especially after the CMS stuff was generalized by 634b4a, this was a
trivial change to implement and also means color management will be much
higher quality when enabled with vo=opengl (which had quantization
issues in the past due to the 8 bit FBO format and upscaling), since it
can be done in a single pass now.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
Also replace their implementation with the recently introduced
properties. One significant difference is that audio-channels using OSD
formatting does not print the channel layout. The user can just use the
replacement property instead.
This brings the volume control closer to what is percepted as linear
volume change.
Adjust the --softvol-max default to roughly the old maximum (roughly
doubles the gain).
Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
Only absolute percentage seeking was permitted first. It is now also
possible to seek by relative percentage.
MPSEEK_FACTOR is used as seek_type.
Fixes#1950.
Signed-off-by: wm4 <wm4@nowhere>
Instead of having separate backends, make use of GLES a flag. This
reduces the number of backends and the resulting annoyances.
Also, nobody cares about using GLES, so there's no backward
compatibility either.
(I have no idea why there are different modes.)
Instead of risking to drop frames too early, give it some margin. Since
there are situations this could deadlock, wait with a timeout. This can
happen if e.g. the API user is refusing to render anything, or if
uninitialization is happening.
This creates the window before the first file is loaded. This was
requested a bunch of times, but on the other hand a change to make this
behavior the default was reverted some time ago, because other users
hated it.
Reduces (but likely does not remove) the danger of rounding intermediate
values down to 8 bit. This is important for cscale, or any other
processing that might store raw YUV values in framebuffers.
Fixes#1918.
ao_coreaudio uses AudioUnit - the OSX software mixer. In theory, it
supports multichannel audio just fine. But in practice, this might be
disabled by default, and the user is supposed to select a multichannel
base format in the "Audio MIDI Setup" utility.
This option attempts to change this setting automatically. Some possible
disadvantages and caveats are listed in the manpage additions. It is off
by default, since changing this might be rather bad behavior for a
normal application.
Since commit 7381db60, strings like "~desktop/" were expanded as
platform-specific paths by mpv. Apparently this similarity to standard
Unix shell expansion caused confusion, so change it to "~~desktop/". The
shell doesn't expand this, so it should be better.
This now stores caches for multiple ICC profiles, potentially all the
user has ever used. The big use case for this is for users with multiple
monitors. The old logic would mandate recomputing the LUT and discarding
the cache whenever dragging mpv from one screen to another.
This also avoids having to save and check the ICC profile itself, since
the file name already uniquely determines it.
This should take care of the endless complaints about the default
location for screenshots (and will of course create new ones).
If the screenshot-template is set to an absolute path, the directory
won't be used. So this should be reasonably compatible.
So that the user realizes where they come from, or can find them at all.
This was a common complaint, and this is the most lazy solution. Better
suggestions for a default template are welcome.
win32 has a special function for this.
I'm not sure about OSX - it seems ~/Desktop can be hardcoded, and the
OSX GUI actually localizes the _displayed_ path in its UI.
For Unix, there is not much to be done, or is there.
Now the rescan_external_files command will by default reselect the audio
and subtitle streams. This should be more intuitive.
Client API users and Lua scripts might break, but can be fixed in a
backward-compatible way by setting the mode explicitly.
This was in the "Window" section. It has absolutely nothing to do with
windows. Move it to the "Miscellaneous" section instead. The "--mc"
option, which has a similar function, was already there.
The build failed because rst2pdf apparently has problems with
page breaks. In this case, the link to the ALSA upmix guide was
causing a page break in an admonition block. My guess is that
rst2pdf screws up when it can’t fill at least one line of text
following a page break, so I worked around this by making that
paragraph a little longer. Seems to do the trick.
I also shortened the URL using GitHub’s service because it was
causing some rather unsightly formatting in the manpage output.
Maybe we should just build HTML instead of a PDF.
Approximate time of video buffered in the demuxer, in seconds. Same as
`demuxer-cache-duration` but returns the last timestamp of bufferred
data in demuxer.
Signed-off-by: wm4 <wm4@nowhere>
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
Useful for dealing with libavfilter's terrible graph syntax.
Not strictly backwards compatible (for example "[a[b]" fails now - the
"[" within the quote is interpreted now). But hopefully it's obscure
enough not to warrant any kind of compatibility hacks.
It's entirely useless, especially now that vo.c handles screenshots in a
generic way, and requires no special VO support. There are some
potential weird use-cases, but actually I've never seen it being used.
The old behavior does not make too much sense after all. If you don't
want to file to be overwritten, the user can check this manually.
This is a change in behavior - let's hope nobody actually relied on it.
libavcodec makes it impossible to distinguish dropped frames (requested
with AVCodecContext.skip_frame), and cases when the decoder simply does
not return a frame by default (such as with VP9, which has invisible
reference frames).
This confuses users when decoding VP9 video. It's basically a cosmetic
issue, so just paint it over by ignoring them if framedropping is
disabled.
It seems this choice was never documented. "always" is actually older
than "yes", so just declare it a compatibility value for "yes". (Also
move it before "always" in the C code to make this clear.)
I tried to find that option by searching for terms like “cover art”
and got nothing. I imagine most users would look for similar terms.
Hope this helps.
This could help in cases where the DWM (Windows desktop compositor) adds another
layer of bufferring and therefore the SwapBuffers timing could get messed up.
Signed-off-by: wm4 <wm4@nowhere>
This seems to come up often. I guess '.' vs. ':' for Lua calls is
confusing, and this part of the scripting API is the only one which
requires using it.
There still might be FFmpeg demuxers which mess up if audio is disabled
(like it happened to the FLV demuxer), but these are bugs and shouldn't
happen.
This merges all of the scaler-related options into a single
configuration struct, and also cleans up the way they're passed through
the code. (For example, the scaler index is no longer threaded through
pass_sample, just the scaler configuration itself, and there's no longer
duplication of the params etc.)
In addition, this commit makes scale-down more principled, and turns it
into a scaler in its own right - so there's no longer an ugly separation
between scale and scale-down in the code.
Finally, the radius stuff has been made more proper - filters always
have a radius now (there's no more radius -1), and get a new .resizable
attribute instead for when it's tunable.
User-visible changes:
1. scale-down has been renamed dscale and now has its own set of config
options (dscale-param1, dscale-radius) etc., instead of reusing
scale-param1 (which was arguably a bug).
2. The default radius is no longer fixed at 3, but instead uses that
filter's preferred radius by default. (Scalers with a default radius
other than 3 include sinc, gaussian, box and triangle)
3. scale-radius etc. now goes down to 0.5, rather than 1.0. 0.5 is the
smallest radius that theoretically makes sense, and indeed it's used
by at least one filter (nearest).
Apart from that, it should just be internal changes only.
Note that this sets up for the refactor discussed in #1720, which would
be to merge scaler and window configurations (include parameters etc.)
into a single, simplified string. In the code, this would now basically
just mean getting rid of all the OPT_FLOATRANGE etc. lines related to
scalers and replacing them by a single function that parses a string and
updates the struct scaler_config as appropriate.
This makes the core much more elegant, reusable, reconfigurable and also
allows us to more easily add aliases for specific configurations.
Furthermore, this lets us apply a generic blur factor / window function
to arbitrary filters, so we can finally "mix and match" in order to
fine-tune windowing functions.
A few notes are in order:
1. The current system for configuring scalers is ugly and rapidly
getting unwieldy. I modified the man page to make it a bit more
bearable, but long-term we have to do something about it; especially
since..
2. There's currently no way to affect the blur factor or parameters of
the window functions themselves. For example, I can't actually
fine-tune the kaiser window's param1, since there's simply no way to
do so in the current API - even though filter_kernels.c supports it
just fine!
3. This removes some lesser used filters (especially those which are
purely window functions to begin with). If anybody asks, you can get
eg. the old behavior of scale=hanning by using
scale=box:scale-window=hanning:scale-radius=1 (and yes, the result is
just as terrible as that sounds - which is why nobody should have
been using them in the first place).
4. This changes the semantics of the "triangle" scaler slightly - it now
has an arbitrary radius. This can possibly produce weird results for
people who were previously using scale-down=triangle, especially if
in combination with scale-radius (for the usual upscaling). The
correct fix for this is to use scale-down=bilinear_slow instead,
which is an alias for triangle at radius 1.
In regards to the last point, in future I want to make it so that
filters have a filter-specific "preferred radius" (for the ones that
are arbitrarily tunable), once the configuration system for filters has
been redesigned (in particular in a way that will let us separate scale
and scale-down cleanly). That way, "triangle" can simply have the
preferred radius of 1 by default, while still being tunable. (Rather
than the default radius being hard-coded to 3 always)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
It was "by design" possible to make mpv crash if the parameters didn't
make enough sense, like "format=rgb24:yuv420p". While forcing the format
has some minor (rather questionable) use for debugging, allowing it to
crash is just stupid.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
This has a number of user-visible changes:
1. A new flag blend-subtitles (default on for opengl-hq) to control this
behavior.
2. The OSD itself will not be color managed or affected by
gamma controls. To get subtitle CMS/gamma, blend-subtitles must be
used.
3. When enabled, this will make subtitles be cleanly interpolated by
:interpolation, and also dithered etc. (just like the normal output).
Signed-off-by: wm4 <wm4@nowhere>
Bilinear scaling is not a suitable default for something named "hq"; the
whole reason this was done in the past was because cscale used to be
obscenely slow. This is no longer the case, with cscale being nearly
free.
Why did this exist in the first place? Other than being completely
useless, this even caused some regressions in the past. For example,
there was the case of a laptop exposing its accelerometer as joystick
device, which led to extremely fun things due to the default mappings of
axis movement being mapped to seeking.
I suppose those who really want to use their joystick to control a media
player (???) can configure it as mouse device or so.
This replaces the old smoothmotion code by a more flexible tscale
option, which essentially allows any scaler to be used for interpolating
frames. (The actual "smoothmotion" scaler which behaves identical to the
old code does not currently exist, but it will be re-added in a later commit)
The only odd thing is that larger filters require a larger queue size
offset, which is currently set dynamically as it introduces some issues
when pausing or framestepping. Filters with a lower radius are not
affected as much, so this is identical to the old smoothmotion if the
smoothmotion interpolator is used.
I think this is what I alwass missed ever since I found the MPlayer
cache options: a way to enable the cache on local files with the default
settings, whatever they are.
Requested change in behavior.
Note that we set the assumed "infinite" display_fps to 1e6, which
conveniently lets vo_get_vsync_interval() return a dummy value of 1,
which can be easily checked against, and still avoids doing math with
float INFs.
This adds stuff related to gamma, linear light, sigmoid, BT.2020-CL,
etc, as well as color management. Also adds a new gamma function (gamma22).
This adds new parameters to configure the CMS settings, in particular
letting us target simple colorspaces without requiring usage of a 3DLUT.
This adds smoothmotion. Mostly working, but it's still sensitive to
timing issues. It's based on an actual queue now, but the queue size
is kept small to avoid larger amounts of latency.
Also makes “upscale before blending” the default strategy.
This is justified because the "render after blending" thing doesn't seme
to work consistently any way (introduces stutter due to the way vsync
timing works, or something), so this behavior is a bit closer to master
and makes pausing/unpausing less weird/jumpy.
This adds the remaining scalers, including bicubic_fast, sharpen3,
sharpen5, polar filters and antiringing. Apparently, sharpen3/5 also
consult scale-param1, which was undocumented in master.
This also implements cropping and chroma transformation, plus
rotation/flipping. These are inherently part of the same logic, although
it's a bit rough around the edges in some case, mainly due to the fallback
code paths (for bilinear scaling without indirection).
This gets rid of the need for a second (or more) parameters; instead it
can be all in one parameter. The (now) redundant parameter is still
parsed for compatibility, though.
The way the flags make each other conflict is a bit tricky: they have
overlapping bits, and the option parser disallows setting already set
bits.
This automatically sets the gamma option depending on lighting conditions
measured from the computer's ambient light sensor.
sRGB – arguably the “sibling” to BT.709 for still images – has a reference
viewing environment defined in its specification (IEC 61966-2-1:1999, see
http://www.color.org/chardata/rgb/srgb.xalter). According to this data, the
assumed ambient illuminance is 64 lux. This is the illuminance where the gamma
that results from ICC color management is correct.
On the other hand, BT.1886 formalizes that the gamma level for dim environments
to be 2.40, and Apple resources (WWDC12: 2012 Session 523: Best practices for
color management) define the BT.1886 dim at 16 lux.
So the logic we apply is:
* >= 64lux -> 1.961 gamma
* =< 16lux -> 2.400 gamma
* 16lux < x < 64lux -> logaritmic rescale of lux to gamma. The human
perception of illuminance roughly follows a logaritmic scale of lux [1].
[1]: https://msdn.microsoft.com/en-us/library/windows/desktop/dd319008%28v=vs.85%29.aspx
Breaks vo_opengl by default. I'm hot able to fix this myself, because I
have no clue about the overcomplicated color management logic. Also,
whilethis is apparently caused by commit fbacd5, the following commits
all depend on it, so revert them too.
This reverts the following commits:
e141caa97d653b0dd529729c8b3f64fbacd5de31Fixes#1636.
This relies on upstream support in lavc, and will hence basically not
work at all. The intent is to get support for writing this information
into ffmpeg's PNG encoders etc.
Now that we have fast stream switching, we can bump these sizes, as the
queues cause no delay in switching anymore.
Of course, the fast stream switching works for mkv and mp4 only. Other
formats will incur a quite terrible delay especially in network mode,
which this commit changes to 10 seconds. Let's see if someone
complains...
The way I interpreted it, it seemed like this was not default behavior
and could be enabled with --audio-pitch-correction - it should be made
clearer that this is actually *the default behavior*.
This is based on pretty much the same (somewhat naive) logic right now.
I'm not convinced that the extra logic that eg. madVR includes is worth
enough to warrant heavily confusing the logic for it.
This shouldn't slow down the logic at all in any sane shader compiler,
and indeed it doesn't on any shader compiler that I tested.
Note that this currently doesn't affect cscale at all, due to the weird
implementation details of that.
This option allows the user to pass non-supported options directly to
youtube-dl, such as "--proxy URL", "--username USERNAME" and
'--password PASSWORD".
There is no sanity checking so it's possible to break things (i.e.
if you pass "--version" mpv exits with random JSON error).
Signed-off-by: wm4 <wm4@nowhere>
Hopefully, this will really clear up how the thing is supposed to work
(and that it's not SVP, nor MVTools).
I also removed instances of the word "interpolation", since that's a
term that's easily misleading.
Finally, I expanded on smoothmotion-threshold since the purpose/meaning
was a bit confusing.
This is done mainly for consistency, since all of the EWA filters share
similar properties and it's important to distinguish them for
documentation purposes.
This is a variation of ewa_lanczos that is sinc-windowed instead of
jinc-windowed. Results are pretty similar, but the logic is simpler.
This could potentially replace the ugly ewa_lanczos code.
It's hard to tell, but from comparing stills I think this one has
slightly less ringing than regular ewa_lanczos.
Now --ass-use-margins doesn't apply to normal subtitles anymore. This is
probably the inverse from the mpv behavior users expected so far, and
thus a breaking change, so rename the option, that the user at least has
a chance to lookup the option and decide whether the new behavior is
wanted or not.
The basic idea here is:
- plain text subtitles should have a certain useful defalt behavior,
like actually using margins
- ASS subtitles should never be broken by default
- ASS subtitles should look and behave like plaintext subtitles if
the --ass-style-override=force option is used
This also subtly changes --sub-scale-with-window and adds the --ass-
scale-with-window option. Since this one isn't so important, don't
bother with compatibility.
You can set in which "corner" the OSD and subtitles are shown. I'd
prefer it a bit more general (so you could set the alignment using
a factor), but the libass API does not provide this.
Requested. See manpage additions.
This also makes the magical loop_times constants slightly saner, but
shouldn't change the semantics of any existing --loop option values.
Not very important for the command line player; but GUI applications
will want to know about this.
This only adds the internal API; support for specific audio outputs
comes later.
This reuses the ao struct as context for the hotplug event listener,
similar to how the "old" device listing API did. This is probably a bit
unclean and confusing. One argument got reusing it is that otherwise
rewriting parts of ao_pulse would be required (because the PulseAudio
API requires so damn much boilerplate). Another is that --ao-defaults is
applied to the hotplug dummy ao struct, which automatically applies such
defaults even to the hotplug context.
Notification works through the property observation mechanism in the
client API. The notification chain is a bit complicated: the AO notifies
the player, which in turn notifies the clients, which in turn will
actually retrieve the device list. (It still has the advantage that it's
slightly cleaner, since the AO stuff doesn't need to know about client
API issues.)
The weird handling of atomic flags in ao.c is because we still don't
require real atomics from the compiler. Otherwise we'd just use atomic
bitwise operations.
In my opinion the artifacts created by af_scaletempo on extreme slowdown
(50% or so) are too bothersome - but users disagree. So use
af_scaletempo on any speed changes, not just on speedup.
librubberband exports a big load of options. Normally, the default
settings (whether they're librubberband defaults or our defaults) should
be sufficient, but since I'm not so sure about this, making it
configurable allows others to figure it out for me.
If "--af=rubberband" is used, librubberband will be used to speed up or
slow down audio with pitch correction.
This still has some problems: the audio delay is not calculated
correctly, so the audio position jitters around by a few milliseconds.
This will probably ruin video timing.
This reverts commit a33b46194c.
It turns out FFmpeg really considers this a bug, and fixed it by making
the decoder output the correct pixel format.
Fixes#1565. Reverts the fix#1528, though it should work fine with
a recent git master FFmpeg.
Make it accept "," as separator, instead of only ":". Do this by using
the key-value-list parser. Before this, the option was stored as a
string, with the option parser verifying that the option value as
correct. Now it's stored pre-parsed, although the log levels still
require separate verification and parsing-on-use to some degree (which
is why the msg-level option type doesn't go away).
Because the internal type changes, the client API "native" type also
changes. This could be prevented with some more effort, but I don't
think it's worth it - if MPV_FORMAT_STRING is used, it still works the
same, just with a different separator on read accesses.
This introduces a new option linear-scaling, which is now implied by
srgb, icc-profile and sigmoid-upscaling.
Notably, this means (sigmoidized) linear upscaling is now enabled by
default in opengl-hq mode. The impact should be negligible, and there
has been no observation of negative side effects of sigmoidized scaling,
so it feels safe to do so.
Autoload external audio files only if there's at least a video track
(which is not coverart pseudo-video).
Enable external audio file autoloading by default. Now that we actively
avoid doing stupid things like loading an external audio file for an
audio-only file, this should be fine.
Additionally, don't autoload subtitles if a subtitle is played.
Although you currently can't play subtitles without audio or video,
it's disturbing and stupid that the player might load subtitle files
with different extension and then fail.
Giving this such a prominent place is not really appropriate anymore.
Most people seeing this would probably expect a release changelog, not
something about MPlayer.
Since the page still could be useful for former MPlayer users (in
particular to avoid confusion with renamed options etc.), still keep
it in the DOCS directory.
