This was attempted before in fc9695e63b, but it was reverted in
1b7ce759b1 because it caused conflicts with other software watching
the same keys (See #2041.) It seems like some PCs ship with OEM software
that watches the volume keys without consuming key events and this
causes them to be handled twice, once by mpv and once by the other
software.
In order to prevent conflicts like this, use the WM_APPCOMMAND message
to handle media keys. Returning TRUE from the WM_APPCOMMAND handler
should indicate to the operating system that we consumed the key event
and it should not be propogated to the shell. Also, we now only listen
for keys that are directly related to multimedia playback (eg. the
APPCOMMAND_MEDIA_* keys.) Keys like APPCOMMAND_VOLUME_* are ignored, so
they can be handled by the shell, or by other mixer software.
This currently only works when using lcms-based color management
(--icc-profile-*).
In principle, we could also support using lcms even when the user has
not specified an ICC profile, by generating the profile against a fixed
reference (--target-prim/--target-trc) instead. I still might do that
some day, simply because 3dlut provides a higher quality conversion than
our simple gamut mapping does for stuff like BT.2020, and also because
it's now needed to enable embedded ICC profiles. But that would be a
separate change, so preserve the status quo for now.
(Besides, my opinion is still that you should be using an ICC profile if
you care about colors being accurate _at all_)
This broke float textures, which were actually used by some shaders.
There were probably some other bugs as well.
Lots of code can be avoided by using ra_tex_params directly, so do that.
The main change is that COMPONENT/FORMAT are replaced by a single FORMAT
directive, which takes different parameters now. Due to the mess with
16/32 bit float textures, and because we want to support other APIs than
just GL in the future, it's not really clear how this should be handled,
and the nice component/type separation makes things actually harder. So
just jump the gun and use the ra_format.name names, which were
originally meant mostly for debugging. (This is probably something that
will be regretted later.)
Still only superficially tested, but seems to work.
Fixes#4708.
Since this code was already written for HDR, and is now per-channel
(because it works better for HDR as well), we can actually reuse this to
get very high quality gamut mapping without clipping. The only required
change is to move the tone mapping from before the gamut map to after
the gamut map. Additonally, we need to also account for changes in the
signal range as a result of applying the CMS when we compute ref_peak,
which is fortunately pretty easy because we only need to consider the
case of primaries mapping to themselves.
Since `HDR` no longer really makes sense as a label, rename it to
`--tone-mapping` in general. Also fits better with
`--tone-mapping-desat` etc.
Arguably we could also rename `--hdr-compute-peak`, but that option is
basically only useful for HDR content anyway because we don't need
information about the signal range for gamut mapping.
This (finally!) gives us reasonably high quality gamut mapping even in
the absence of an ICC profile / 3DLUT.
Parsing the texture data as raw strings makes the textures the most
portable and self-contained. In order to facilitate different types of
shaders, the parse_user_shader interaction has been changed to instead
have it loop through blocks and call the passed functions for each valid
block parsed. This is more modular and also cleaner, with better code
separation.
Closes#4586.
Two changes, compounded into one since they affect the same logic:
1. Never use linearization for HDR downscaling
2. Always use linearization for interpolation
Instead of fixing p->use_linear at the beginning of pass_render_frame,
we flip it on "dynamically" as needed. I plan on killing this
p->use_linear frame (along with other per-pass metadata) and moving them
into their own struct for tracking the "current" state of the video, but
that's a separate/upcoming refactor.
As a small bonus, reduce some code duplication in the interpolation
logic.
Fixes#4631
I've found more test cases where hwdec=cuda shits itself, even
hwdec=cuda-copy. So the whole “copyback is no worse than swdec” is
simply not true. Also, in the light of 10 bit media files and APIs
silently truncating to 8 bit, the warnings need to be generalized a bit.
It's no longer safe to say that “doesn't convert to RGB” means “perfect
playback”.
I've also added a very strong disclaimer to the whole hwdec scenario
clarifying why hwdec is usually a bad idea unless absolutely needed,
because I've seen issue after issue that is resolved by disabling hwdec.
This is done via compute shaders. As a consequence, the tone mapping
algorithms had to be rewritten to compute their known constants in GLSL
(ahead of time), instead of doing it once. Didn't affect performance.
Using shmem/SSBO atomics in this way is extremely fast on nvidia, but it
might be slow on other platforms. Needs testing.
Unfortunately, setting up the SSBO still requires OpenGL calls, which
means I can't have it in video_shaders.c, where it belongs. But I'll
defer worrying about that until the backend refactor, since then I'll be
breaking up the video/video_shaders structure anyway.
Can be enabled via --vd-lavc-dr=yes. See manpage additions for what it
does.
This reminds of the MPlayer -dr flag, but the implementation is
completely different. It's the same basic concept: letting the decoder
render into a GPU buffer to avoid a copy. Unlike MPlayer, this doesn't
try to go through filters (libavfilter doesn't support this anyway).
Unless a filter can work in-place, DR will be silently disabled. MPlayer
had very complex semantics about buffer types and management (which
apparently nobody ever understood) and weird restrictions that mostly
limited it to mpeg2 style codecs. The mpv code does not do any of this,
and just lets the decoder allocate an arbitrary number of untyped
images. (No MPlayer code was used.)
Parts of the code based on work by atomnuker (starting point for the
generic code) and haasn (some GL definitions, some basic PBO code, and
correct fencing).
Remove this code because it could be argued that it contains GPL-only
code (see commit 642e963c86 for details).
The remaining aspect methods appear to work just as well, are
potentially more compatible to other players, and the code becomes much
simpler.
Performance seems pretty much unchanged but I no longer get nasty spikes
on NUMA systems, probably because glBufferSubData runs in the driver or
something.
As a simplification of the code, we also just size the PBO to always
have the full size, even for cropped textures. This seems slower but not
by relevant amounts, and only affects e.g. --vf=crop. It also slightly
increases VRAM usage for textures with big strides.
This new code path is especially nice because it no longer depends on
GL_ARB_map_buffer_range, and no longer uses any functions that can
possibly fail, thus simplifying control flow and seemingly deprecating
the manpage's claim about possible image corruption.
In theory we could also reduce NUM_PBO_BUFFERS since it doesn't seem
like we're streaming uploads anyway, but leave it in there just in
case some drivers disagree...
This is more of a niche usecase than --ytdl-format and --ytdl-raw-options,
so a simple script option should be enough.
Either create lua-settings/ytdl_hook.conf with
'exclude=example.com,sub.example.com' option or
"--script-opts=ytdl_hook-exclude=example.com,sub.example.com"
This just indicates a fixed linear coefficient to multiply into the
signal, similar to the old option --target-brightness (but the inverse
thereof). Good for testing purposes, which is why I added it. (This also
corresponds somewhat to what zimg does)
It's now possible to request non-dumb mode as a user, even when not
using any non-dumb features. This change is mostly intended for testing,
so I can easily switch between dumb and non-dumb mode on default
settings. The default behavior is unaffected.
Was at least somewhat broken, and is misleading. I don't really have an
idea why FFmpeg has two AVOptions here anyway. We don't need to care,
and I'm only aware of 1 user trying this option ever.
See #4579.
This is exposed so that bjin/mpv-prescalers can use textureGatherOffset
for performance.
Since there are now quite a lot of parameters where it isn't quite clear
why they're all defined, add a paragraph to the man page that explains
them a bit.
This helps prevent unnaturally, weirdly colorized blown out highlights
for direct images of the sunlit sky and other way-too-bright HDR
content. I was debating whether to set the default at 1.0 or 2.0, but
went with the more conservative option that preserves more detail/color.
This is more efficient on my machine (nvidia), but only when applied to
groups of exactly 4 texels. So we switch to the more efficient
textureGather for groups of 4. Some notes:
- textureGatherOffset seems to be faster than textureGather by a
non-negligible amount, but for some reason, textureOffset is still
slower than a straight-up texture
- textureGather* requires GLSL 400; and at least on nvidia, this
requires actually allocating a GL 4.0 context.
- the code in opengl/common.c that clamped the GLSL version to 330 is
deprecated, because the old user shader style has been removed
completely in the meantime
- To combat the growing complexity of the polar sampling code, we drop
the antiringing functionality from EWA shaders completely, since it
never really worked well for EWA to begin with. (Horrific artifacting)
This allows filter functions to be prematurely cut off once their
contributions start becoming insignificant. This effectively prevents
wasted GPU time sampling from parts of the function that are essentially
reduced to zero by the window function, providing anywhere from a 10% to
20% speedup. (5700μs -> 4700μs for me)
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
The changes to path list options is basically getting rid of the need to
pass multiple paths to a single option. Instead, you can use the option
multiple times. The old behavior can be used by using the -set suffix
with the option.
Change some options to path lists. For example --script is now append by
default, and if you use --script-set, you need to use ":"/";" as
separator instead of ",".
--sub-paths/--audio-file-paths is a deprecated alias now, and will break
if the user tries to pass multiple paths to it. I'm assuming that if
these are used, most users will pass only 1 path anyway.
--opengl-shaders has more compatibility handling, since it's probably
rather common that users pass multiple options to it.
Also document all that in the manpage.
I'll probably regret this later, as it somewhat increases the complexity
of the option parser, rather than increasing it.
I noticed that the previous default, bitstream, actually breaks with
some shitty anamorphic DVD rips that signal square pixel aspect in the
bitstream. So I think the "container" method is a better default.
A relic of mplayer had 'I' as the keybind to show the filename of the
currently playing file on the OSD. mpv does not do this by default.
This commit removes this incorrect information from the mpv manage.
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
st2084 and std-b67 are really weird names for PQ and HLG, which is what
everybody else (including e.g. the ITU-R) calls them. Follow their
example.
I decided against naming them bt2020-pq and bt2020-hlg because it's not
necessary in this case. The standard name is only used for the other
colorspaces etc. because those literally have no other names.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
"Almost" because this might contain copyright by michael, who agreed
with LGPL, but only once the core is LGPL. This is preparation for that
to happen.
Apart from that, the usual remarks apply. In particular, dec_video.c
started out quite chaotic with no modularization, but was later
basically gutted, and in general rewritten a bunch of times. Not going
to give a history lesson.
Special attention needs to be given to 3 patches by cehosos, who did not
agree to the relicensing:
240b743ebd: --field-dominance
e32cbbf7dc: reinit VO if aspect ratio changes
306f6243fd: use container aspect if codec aspect unset (?)
The first patch is pretty clearly still in the current code, and needs
to be disabled for LGPL.
The functionality of the second patch is still active, but implemented
completely different, and as part of general frame parameter changes (at
the time of the patch, MPlayer already reinitialized the VO on frame
size and pixel format changes - all this was merged into a single check
for changing image parameters).
The third patch makes me a bit more uncomfortable. It appears the code
was moved to dec_video.c in de68b8f23c, and further changed in
82f0d373, 0a0bb905, and bf13bd0d. You could claim that cehoyos'
copyright still sticks. Fortunately, we implement alternative aspect
detection, which is simpler and probably preferable, and which arguably
contains none of the original code and logic, and thus should be fully
safe.
While I don't know if cehoyos' copyright actually still applies, I'm
more comfortable with making the code GPL-only for now. Also change the
default to use the (in future) plain LGPL code, and deprecate the one
associated with the GPL code, so we can eventually remove the GPL code.
But it's also possible we decide that the copyright doesn't apply, and
undo the deprecation and GPL guards.
I expect that users won't notice anything. If you ask me, the old aspect
method was probably an accidental bug instead of intentional behavior.
Although, the new aspect method was broken too, so I had to fix it.
image_writer.c has code originating from vf_screenshot.c, vo_jpeg.c, and
potentially others. vo_image.c is based on a bunch of those VOs as well,
and the intention was to replace them with a single codebase.
vo_tga.c was written by someone who was not or not could be contacted,
but it doesn't matter anyway, as no code from that initial patch was
used.
One rather old patch (57f77bb41a) reordered by libjpeg patch API calls,
and the author of the patch was not contacted. But at least with the
smoothing_factor override removed, this pretty much exactly corresponds
to the official libjpeg API example (and might even reflect a change to
those - didn't dig deeper). This removes the -jpeg-smooth option. While
we're at it, remove all the other dropped jpeg options from the manpage
(which was forgotten in past changes).
It was an attempt to move some MPlayer filters (which were removed from
mpv) to external, loadable filters. That worked well, but then the
MPlayer filters were ported to libavfilter (independently), so they're
available again. Also there is a more widely supported and more advanced
loadable filter system supported by mpv: vapoursynth.
In conclusion, vf_dlopen is not useful anymore, confusing, and requires
quite a bit of code (and probably wouldn't survive the rewrite of the
mpv video filter chain, which has to come at some point). It has some
implicit dependencies on internal conventions, like possibly the format
names dropped in the previous commit.
We also deprecated it last release. Drop it.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
Sometime earlier, "sub-ass-style-override" was renamed to
"sub-ass-override". The option's documentation was updated to support
this, but not the documentation for the hotkey that toggles this option.
This commit updates the keyboard shortcut documentation to fix that.
Signed-off-by: wm4 <wm4@nowhere>
I call it `mobius` because apparently the form f(x) = (cx+a)/(dx+b) is
called a Möbius transform, which is the algorithm this is based on. In
the extremes it becomes `reinhard` (param=0.0 and `clip` (param=1.0),
smoothly transitioning between the two depending on the parameter.
This is a useful tone mapping algorithm since the tunable mobius
transform allows the user to decide the trade-off between color accuracy
and detail preservation on a continuous scale. The default of 0.3 is
already far more accurate than `reinhard` while also being reasonably
good at preserving highlights, without suffering from the overall
brightness drop and color distortion of `hable`.
For these reasons, make this the new default. Also expand and improve
the documentation for these tone mapping functions.
List of changes:
1. Rename `signfs` to `scale`, to better match what it actually does
(force --sub-scale to apply to ASS subtitles), and fix the blatantly
wrong documentation (it actually specifically does *not* apply to
signs)
2. Rename `--sub-ass-style-override` to `--sub-ass-override` to help
reduce confusion between it and `--sub-ass-force-style`, as well as
pointing out that it doesn't necessarily actually override styles.
(The new `scale` option, for example, only sets
ASS_OVERRIDE_BIT_FONT_SIZE, but not ASS_OVERRIDE_BIT_STYLE)
3. Mention that `--sub-ass-override` is generally sort of smart about
only overriding dialog, not signs.
In a multi GPU scenario, it may be desirable to use different GPUs
for decode and display responsibilities. For example, if a secondary
GPU has better video decoding capabilities.
In such a scenario, we need to initialise a separate context for each
GPU, and use the display context in hwdec_cuda, while passing the
decode context to avcodec.
Once that's done, the actually hand-off between the two GPUs is
transparent to us (It happens during the cuMemcpy2D operation which
copies the decoded frame from a cuda buffer to the OpenGL texture).
In the end, the bulk of the work is around introducing a new
configuration option to specify the decode device.
Update man page for fonts.conf and subfont.ttf. These are two
undocumented features in mpv. They were only hardcoded into sub/ass_mp.c
and could not be found anywhere else in the entire codebase. Git log
reveals that fonts.conf was added in 2013 while subfont.ttf was brought
in by a ancient patch of mplayer in 2002...
These are two quite useful undocumented features when you do not want to
mess up with global fonts.conf to include more fonts.
Also document ~/.config/mpv/fonts/ directory and suggest using fonts.conf
to include additional fonts.
mpv reads all files in ~/.config/mpv/fonts/ directory into memory. If
there are a lot of fonts in that directory, mpv would use a lot of
memory. Using ~/.config/mpv/fonts.conf to include additional fonts is
more memory-efficent.
af_volume is deprecated, and so are its replaygain sub-options. To make
it possible to use replaygain without deprecated options (and of course
to make it available at all after af_volume is dropped), reintroduce
them as top-level options.
This also means that they are easily changeable at runtime by using them
as properties. Change the "volume" property to use the new update
mechanism as well.
We don't actually bother sharing the implementation between new and
deprecated mechanisms, as the deprecated one will simply be deleted.
For the from_dB() functions, we mention anders' copyright, although I'm
not sure if a mere formula is copyrightable. This will have to be
determined later.
This whole change is mostly untested. Our distributed human CI will take
care of it.
It's all explained in the DOCS changes. Although this option was always
kind of obscure and pointless. Until it is removed, the only reason for
setting it would be to raise the static default limit, so change its
default to INT_MAX so that it does nothing by default.
Instead of pausing if --keep-open is active, stop
at end but continue playing if seeking backwards.
And then stop again when end is reached.
Signed-off-by: wm4 <wm4@nowhere>
Over the PR, the option was renamed, and the manpage additions were
slightly changed/enhanced.
Also "announce" the plans to undeprecate it with changed semantics
later. The deprecation period is needed to warn script authors and
client API users (etc.) of the change.
This is done because everyone seems to expect --loop to loop the current
file, not the playlist. Even in cases when only 1 file is on the
playlist, the --loop-file semantics seem to be preferred.
Mostly because of ANGLE (sadly).
The implementation became unpleasantly big, but at least it's relatively
self-contained.
I'm not sure to what degree shaders from different drivers are
compatible as in whether a driver would randomly misbehave if it's fed
a binary created by another driver. The useless binayFormat parameter
won't help it, as they can probably easily clash. As usual, OpenGL is
pretty shit here.
Now you can for example do "--vf=hue=h=60" - there is no "hue" filter in
mpv, so libavfilter's will be used.
This has certain caveats (see manpage).
The point of this is providing a relatively smooth transition path to
removing our own filter stuff.
The plan is to nuke the custom filter chain completely. It's not clear
what will happen to the still needed builtin filters (mostly hardware
deinterlacing and vf_vapoursynth). Most likely we'll replace them with
different filter chain concept (whose main purpose will be providing
builtin things and bridging to libavfilter).
The undocumented "warn" options are there to disable deprecation
warnings when the player inserts filter automatically.
The same will be done to audio filters, at a later point.
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes#4250.
Obviously, this has no effect on commands which do not support this
explicitly. A later commit will enable this for screenshots.
Also add some wording on mpv_command_async(), which has nothing to do
with this. Having a more elegant, unified behavior would be nice. But
the API function was not created for this - it's merely for running
commands _synchronously_ on the core, but without blocking the client
API caller (if the API user consistently uses only async functions).
for a reason i can just assume some key events can vanish from the
event chain and mpv seems unresponsive.
after quite some testing i could confirm that the events are present at
the first entry point of the event chain, the sendEvent method of the
Application, and that they vanish at a point afterwards. now we use
that entry point to grab keyDown and keyUp events. we also stop
propagating those key events to prevent the no key input' error sound.
if we ever need the key events somewhere down the event chain we need
to start propagating them again. though this is not necessary currently.
"@name:!" becomes simply "@name". This is actually slightly more complex
to parse, but makes for a much simpler syntax and will be less weird to
the user. Suggested by haasn.
The old syntax is now rejected with an error.
Also add some more explicit error checks, instead of e.g. allowing empty
filter names and erroring only when it's not found.
DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL might be buggy on some hardware.
Additionaly DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL might be supported on some
Windows 7 systems with the platform update, but it might have poor
performance. In these cases, the user might want to disable the use of
DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL swap chains with --angle-flip=no.
It should default to true, but setting the filter list via mpv_node
(relevant for client API and Lua scripting) left it to false.
Also "document" the flag.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
Add subtitle filter to remove additions for deaf or hard-of-hearing
(SDH). This is for English, but may in part work for others too.
This is an ASS filter and the intention is that it can always be
enabled as it by default do not remove parts that may be normal text.
Harder filtering can be enabled with an additional option.
Signed-off-by: wm4 <wm4@nowhere>
Remove low quality drc filter. Anyone whishing to have dynamic range
compression should use the much more powerful acompressor ffmpeg filter:
mpv --af=lavfi=[acompressor] INPUT
Or with parameters:
mpv --af=lavfi=[acompressor=threshold=-25dB:ratio=3:makeup=8dB] INPUT
Refer to https://ffmpeg.org/ffmpeg-filters.html#acompressor for a full
list of supported parameters.
Signed-off-by: wm4 <wm4@nowhere>
