Rename the text subtitle options from --sub-text- to --sub-
and --ass- options to --sub-ass-.
The intention is to common sub options to prefixed --sub-
and special ASS option be seen as a special version of sub options.
The OSD options that work like the --sub- options are still named
--osd-.
Man page updated including a short note about renamed --sub-text-*
and --ass-* options to --sub-* and --sub-ass-*.
This is potentially incompatible if a program used negative timestamps
to deal with timestamp resets, which would potentially lead to mpv
producing and using negative timestamps.
"seek -10 absolute" will seek to 10 seconds before the end. This more or less
matches the --start option and negative seeks were otherwise useless (they just
clipped to 0).
Regression since commit bbcd0b6a. This code is just cursed, because it's
a fragile state machine with no proper tests, and which could be done in
a much simpler way. Without doubt this change will cause a regression in
some ridiculous corner case as well.
Fixes#3610 (the cause of it, not the behavior it resulted in).
When the vaapi decoder is used in copy mode, it creates a dummy
display to render to. In theory, this should support hardware
decoding on on a separate GPU that is not actually connected to
any output (like an iGPU which supports more formats than the
external GPU to which the monitor is connected).
However, before this change, only X11 displays were supported as
dummy displays. This caused some graphics drivers (namely
intel-driver) to core dump when they were not actually used as X11
module.
This change introduces support for drm libav displays, which
allows vaapi-copy to run on such cards which are not actually
rendering the X11 output.
Move the screensaver enable/disable determination to a central place,
and call it if the stop-screensaver property is changed.
Also, do not stop the screensaver when in idle mode (i.e. no file is
loaded).
Fixes#3615.
Other than being overly convoluted, this seems to make sense to me.
Except that to get the "rot" transform I have to set flip=true, which
makes no sense at all to me.
Combining rotation and cropping didn't work. It was just completely
broken.
I'm still not sure if this is correct. Chroma positioning seems to be
broken on rotation. There might also be a problem with non-mod-2 frame
sizes. Still, strictly an improvement for both rotated and non-rotated
rendering modes.
Also, this could probably be written in a more elegant way.
Commit aa1047a3 originally added this as:
+ // this is from the DarkPlaces engine, reduces to 3x3. Original code
+ // released under GPL2 or any later version.
According to Rudolf Polzer, the original author (a certain LH) was
actually asked whether it would be ok to put this code under LGPL, and
the author gave his agreement. This code is not from id Software either
(on which large parts of DarkPlaces is based on), which is the main
reason why DarkPlaces is under GPL.
So this note is just confusing, and always has been LGPL. Fix it.
We'd like to get log messages on the output as soon as possible in the
output. I also feel like using fflush() is nicer than using setvbuf().
Who knows how the latter behaves on win32.
The video code can deal fine with feeding software image formats to
hwdec interop drivers. In RPI's case, this is preferable for
performance, working around OpenGL bugs (see RPI firmware issue #666),
and because OpenGL rendering doesn't bring too many advantages due to
RPI supporting GLES 2.0 only.
Maybe a way to force the normal video path is needed later. But
currently, this can be tested by just not loading the hwdec interop
driver.
If you run command-line mpv and set --hwdec to something that does
not load the RPI interop layer, you'll even have to use --hwdec-preload
manually to get it enabled.
Was intended to put the GL layer above the standard console. (But
actually that was done already, and the oddness I'm seeing seems to
be an unrelated bug.)
The code for expanding the ~~ prefix used mp_find_config_file(), which
strictly looks for _existing_ files in any config path (e.g. not just
the user-local one, but also system-wide config). If no such file
exists, it simply returns NULL, which makes the code below just return
the literal, unexpanded path.
Change this so that it'll resolve the path to the user-local config
directory instead.
Requested in #3591.
This should make display-names usable on Windows. It returns a list of
GDI monitor names like "\\.\DISPLAY1". Since it may be useful to get the
monitor that Windows considers associated with the window (with
MonitorFromWindow,) this will always be returned as the first argument.
This monitor is the one used for display-fps and icc-profile-auto.
Seems like a valid use-case. Not sure if I like it calling back into the
config code. Care has to be taken for not letting the config path
resolving code dead-lock (which is why locking details in the msg.c code
are changed).
Fixes#3591.
I'm not sure if this option affects anything or if it's a placebo,
especially since the VO thread is now registered with MMCSS. Still, I
think --priority=high may have helped back when I used mplayer2 on a
netbook. It's also possible that encoding-mode users would want to set
--priority=idle.
Anyway, it was one of the last M_OPT_FIXED options, so fix that.
We always want to use __declspec(selectany) to declare GUIDs, but
manually including <initguid.h> in every file that used GUIDs was
error-prone. Since all <initguid.h> does is define INITGUID and include
<guiddef.h>, we can remove all references to <initguid.h> and just
compile with -DINITGUID to get the same effect.
Also, this partially reverts 622bcb0 by re-adding libuuid.a to the
build, since apparently some GUIDs (such as GUID_NULL) are not declared
in the source file, even when INITGUID is set.
AVIOContext.seekable is actually a bitfield. Currently, it has only
AVIO_SEEKABLE_NORMAL defined, but it might be extended with a hint for
non-byte seekability. Thus we should check it correctly.
This should still allow user-set default options to override built-in
pseudo-gui while respecting user-set pseudo-gui options.
Pros:
- user option in default profile overrides built-in pseudo-gui's options
Ex: screenshot-directory overrides built-in pseudo-gui's
- user can "fix" pseudo-gui if some option like "force-window=no" is set
in default by setting "force-window=yes" in [pseudo-gui]
- `mpv --profile=pseudo-gui` will work as before
Cons:
- --show-profile=pseudo-gui won't display the built-in's options
Original idea from wm4.
Documentation edits mostly by wm4.
Signed-off-by: wm4 <wm4@nowhere>
If the PTS goes backwards (whether it's a timestamp reset or some other
problem) would just use 0 as frame duration. (At least until the logic
for detecting divergence with the timestamps gets active.)
Trust the demuxer framerate in these cases instead, if it's available. I
think this improves behavior slightly with some broken files.
During init it will first call mp_load_builtin_scripts(), and then again
via mp_load_scripts().
This was harmless (a second attempt won't load it again if the first one
was successful), but it's unnecessary, and also looks confusing if the
scripts failed to load the first time.
demux_lavf.c forces seek to being determined as supported if
STREAM_CTRL_HAS_AVSEEK is returned as success. But it always succeeds
with current FFmpeg versions. (Seems like Libav commit cae448cf broke
this in early 2016.)
Now we can't determine via private API whether the underlying protocol
supports read_seek anymore. The affected protocols (mostly rtmp) also
set seekable=0, meaning they signal they're not seekable, even though
read_seek would work. (My guess is that this can't be fixed because even
though seekable is in theory a combination of elaborate flags [of which
only 1 is defined, AVIO_SEEKABLE_NORMAL], a seekable!=0 always means
it's byte-seekable in some way.)
So the FFmpeg API is being garbage _again_, and all what we can do is
determining this via protocol name and a whitelist.
Should fix the behavior reported in #1701.
Secondary subtitle streams (to be shown on the top of the screen along
main subtitle stream) were shown with normal alignment. This is because
we tell libass to override the alignment style (a relatively recent
change, see commit 2f1eb49e). This would behave differently with old
libass versions too.
To escape the mess, just set the alignment explicitly with an override
tag instead of modifying the style.
This should normally happen only if memory allocation for the state
happens, which should be extremely rare. But with Luajit on OSX, it can
happen if the magic compiler flags required by Luajit were not passed to
mpv compilation. Print an error to reduce confusion.
wm4
Dan Oscarsson
Philip Sequeira
Bernhard Frauendienst
James Ross-Gowan
Ricardo Constantino
Philip Langdale
rr-
Akemi
Kevin Mitchell