Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
There are some use cases for this. For example, you can use it to set
defaults of automatically inserted filters (like af_lavrresample). It's
also useful if you have a non-trivial VO configuration, and want to use
--vo to quickly change between the drivers without repeating the whole
configuration in the --vo argument.
Replace the code that used a single buffer with mp_audio_buffer. This
also enables non-interleaved output operation, although it's still
disabled, and no AO supports it yet.
This comes with two internal AO API changes:
1. ao_driver.play now can take non-interleaved audio. For this purpose,
the data pointer is changed to void **data, where data[0] corresponds to
the pointer in the old API. Also, the len argument as well as the return
value are now in samples, not bytes. "Sample" in this context means the
unit of the smallest possible audio frame, i.e. sample_size * channels.
2. ao_driver.get_space now returns samples instead of bytes. (Similar to
the play function.)
Change all AOs to use the new API.
The AO API as exposed to the rest of the player still uses the old API.
It's emulated in ao.c. This is purely to split the commits changing all
AOs and the commits adding actual support for outputting N-I audio.
ao_lavc.c accesses ao->buffer, which I consider internal. The access was
done in ao_lavc.c/uninit(), which tried to get the left-over audio in
order to write the last (possibly partial) audio frame. The play()
function didn't accept partial frames, because the AOPLAY_FINAL_CHUNK
flag was not correctly set, and handling it otherwise would require an
internal FIFO.
Fix this by making sure that with gapless audio (used with encoding),
the AOPLAY_FINAL_CHUNK is set only once, instead when each file ends.
Basically, move the hack in ao_lavc's uninit to uninit_player.
One thing can not be entirely correctly handled: if gapless audio is
active, we don't know really whether the AO is closed because the file
ended playing (i.e. we want to send the buffered remainder of the audio
to the AO), or whether the user is quitting the player. (The stop_play
flag is overwritten, fixing that is perhaps not worth it.) Handle this
by adding additional code to drain the AO and the buffers when playback
is quit (see play_current_file() change).
Test case: mpv avdevice://lavfi:sine=441 avdevice://lavfi:sine=441 -length 0.2267 -gapless-audio
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
Was disabled by default, was never used, internal support was
inconsistent and poor, and there has been virtually no interest in
creating translations.
And I don't even think that a terminal program should be translated.
This is something for (hypothetical) GUIs.
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
Some still do, because they use the value in other places of the init
function. ao_portaudio is tricky and reads ao->bps in the stream
thread, which might be started on initialization (not sure about that,
but better safe than sorry).
The point is selecting a minimal fallback. The AOs will call this
through the AO API, so it will be possible to add options affecting
the general channel layout selection.
It provides the following mechanism to AOs:
- forcing the correct channel order
- downmixing to stereo if no layout is available
- allow 5.1 <-> 5.1(side) fallback
- handling "unknown" channel layouts
This is quite weak and lots of code/complexity for little gain. All AOs
already made sure the channel order was correct, and the fallback is of
little value, and could perhaps be done in the frontend instead, like
stereo downmixing with --channels=2 is handled. But I'm not really sure
how this stuff should _really_ work, and the new code will hopefully
provides enough flexibility to make radical changes to channel layout
negotiation easier.
This actually breaks audio for 5/6/8 channels. There's no reordering
done yet. The actual reordering will be done inside of af_lavrresample
and has to be made part of the format negotiation.
mpv -ao help and mpv -vo help shouldn't show the encoding outputs (named
"lavc" on both cases). Also make it impossible to select these manually
when not encoding.
On Linux, ao_portaudio has weird freezing issues (possibly specific to
the ALSA backend, though). Also ao_dsound is more likely to get multi-
channel audio output right, and ao_portaudio probably mangles these.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
wm4
Stefano Pigozzi
Christian Neukirchen
Diogo Franco (Kovensky)
Jonathan Yong
Rudolf Polzer