Change it from explicit metadata about every hwaccel method to trying to
get it from libavcodec. As shown by add_all_hwdec_methods(), this is a
quite bumpy road, and a bit worse than expected.
This will probably cause a bunch of regressions. In particular I didn't
check all the strange decoder wrappers, which all cause some sort of
special cases each. You're volunteering for beta testing by using this
commit.
One interesting thing is that we completely get rid of mp_hwdec_ctx in
vd_lavc.c, and that HWDEC_* mostly goes away (some filters still use it,
and the VO hwdec interops still have a lot of code to set it up, so it's
not going away completely for now).
The libavcodec mediacodec support does not conform to the new hwaccel
APIs yet. It has been agreed uppon that this glue code can be deleted
for now, and support for it will be restored at a later point.
Readding would require that it supports the AVCodecContext.hw_device_ctx
API. The hw_device_ctx would then contain the surface ID.
vo_mediacodec_embed would actually perform the task of creating
vo.hwdec_devs and adding a mp_hwdec_ctx, whose av_device_ref is a
AVHWDeviceContext containing the android surface.
Like with all hwaccels, there's little that is actually specific to
decoding (which has been moved away anyway), and what is left are
declarations (which will also go away soon).
Lots of shit code for nothing. We probably could just use libavutil's
code for all of this. But for now go with this, since it tends to
prevent stupid terminal messages during probing (libavutil has no
mechanism to selectively suppress errors specifically during probing).
Ignores the "emulated" API flag (for avoiding vaapi/vdpau wrappers), but
it doesn't matter that much for -copy anyway.
The idea is to get rid of vd_lavc_hwdec, so special functionality like
this has to go somewhere else. At this point, hwframes_refine is only
needed for d3d11, and it doesn't do much, so for now the new callback
has no context. In can be made more fancy if really needed.
Make the VO<->decoder interface capable of supporting multiple hwdec
APIs at once. The main gain is that this simplifies autoprobing a lot.
Before this change, it could happen that the VO loaded the "wrong" hwdec
API, and the decoder was stuck with the choice (breaking hw decoding).
With the change applied, the VO simply loads all available APIs, so
autoprobing trickery is left entirely to the decoder.
In the past, we were quite careful about not accidentally loading the
wrong interop drivers. This was in part to make sure autoprobing works,
but also because libva had this obnoxious bug of dumping garbage to
stderr when using the API. libva was fixed, so this is not a problem
anymore.
The --opengl-hwdec-interop option is changed in various ways (again...),
and renamed to --gpu-hwdec-interop. It does not have much use anymore,
other than debugging. It's notable that the order in the hwdec interop
array ra_hwdec_drivers[] still matters if multiple drivers support the
same image formats, so the option can explicitly force one, if that
should ever be necessary, or more likely, for debugging. One example are
the ra_hwdec_d3d11egl and ra_hwdec_d3d11eglrgb drivers, which both
support d3d11 input.
vo_gpu now always loads the interop lazily by default, but when it does,
it loads them all. vo_opengl_cb now always loads them when the GL
context handle is initialized. I don't expect that this causes any
problems.
It's now possible to do things like changing between vdpau and nvdec
decoding at runtime.
This is also preparation for cleaning up vd_lavc.c hwdec autoprobing.
It's another reason why hwdec_devices_request_all() does not take a
hwdec type anymore.
nvdec aka cuvid aka cuda should work much better than vdpau, and support
newer codecs (such as vp9), and more advanced surface formats (like 10
bit).
This requires moving the d3d hwaccels in the autoprobe order, since on
Windows, d3d decoding should be preferred over nvidia proprietary stuff.
Users of older drivers will need to force --hwdec=vdpau, since it could
happen that the vo_gpu cuda hwdec interop loads (so the vdpau interop is
not loaded), but the hwdec itself doesn't work.
I expect this does not break AMD (which still needs vdpau for vo_gpu
interop, until libva is fixed so it can fully support AMD).
All this code used to be required by the old variants of the libavcodec
hw decoding APIs. Almost all of that is gone, although the mediacodec
API unfortunately still pulls in some old stuff (but not all of it).
(mediacodec build/functionality is untested, but should work.)
All of this was dead code and completely unused.
get_buffer2_hwdec() is the biggest chunk. One unfortunate thing about it
is that, while it was active, it could perform a software fallback much
faster, because it didn't have to wait until a full frame is decoded (it
actually decoded a full frame, but the current code has to decode many
more frames due to the codec delay, because the current code waits until
the API returns a decoded frame.) We should probably restore the latter,
although since it's an optional optimization, and the current behavior
doesn't change with the removal of this code, don't actually do anything
about it.
This is where it should be. It only wasn't because of an old libavcodec
bug, that returned the side data only on every IDR. This required some
sort of caching, which is now dropped. (mp_image wouldn't have been able
to do this kind of caching, because this code is stateless.) We don't
support these old libavcodec versions anymore, which is why this is not
needed anymore.
Also move initialization of rotation/stereo stuff to dec_video.c.
This simply didn't work. Unlike cuda-copy, this is a true hwaccel, and
obviously we need to provide it a device.
Implement this in a relatively generic way, which can probably reused
directly by videotoolbox (not doing this yet because it would require
testing on OSX).
Like with cuda-copy, --cuda-decode-device is ignored. We might be able
to provide a more general way to select devices at some later point.
This is just a dumb consequence of HWDEC_ types somehow being part of
both decoder and VO. Obviously, the VO should only care about supporting
specific hardware surface types or providing specific device types, but
until they are separated, stupid unintuitive mismatches will occur.
See manpage additions.
(In ffmpeg-mpv and Libav, this is still called "cuvid". Libav won't work
yet, because it has no frame params support yet, but this could get
fixed soon.)
This removes the need for codec- and API-specific knowledge in the
libavcodec hardware acceleration API user. For mpv, this removes the
need for vd_lavc_hwdec.pixfmt_map and a few other things. (For now, we
still keep the "old" parts for the sake of supporting older Libav, and
FFgarbage.)
Should speed up seeks.
(Unfortunately it's useless for backstepping. Backstepping is like
precise seeking, except we're unable to drop frames, as we can't know
the previous frame if we drop it.)
This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
The same should happen with any other side data that matters to mpv,
otherwise filters will drop it.
(No, don't try to argue that mpv should use AVFrame. That won't work.)
ffmpeg_garbage() is copy&paste from frame_new_side_data() in FFmpeg
(roughly feed201849b8f91), because it's not public API. The name
reflects my opinion about FFmpeg's API.
In mp_image_to_av_frame(), change the too-fragile
*new_ref = (struct mp_image){0};
into explicitly zeroing out the fields that are "transferred" to the
created AVFrame.
Mostly an obscure option for testing. But --videotoolbox-format can be
deprecated, as it becomes redundant.
We rely on the libavutil hwcontext implementation to reject invalid
pixfmts, or not to blow up if they are incompatible.
iive agreed to relicense things that are still in mpv to LGPLv2.1. So
change the licenses of the affected files, and rename the configure
switch for LGPL mode to --enable-preliminary-lgpl2.
(The "preliminary" part will probably be removed from the configure
switch soon as well.)
Also player/main.c hasn't had GPL parts since a few commits ago.
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This reverts commit 96462040ec.
I guess the autoprobing is still too primitive to handle this well. What
it really should be trying is initializing the wrapper decoder, and if
that doesn't work, try another method. This is complicated by hwaccels
initializing in a delayed way, so there is no easy solution yet.
Probably fixes#4865.
Not resetting hwdec_request_reinit caused it to flush on every packet,
which not only caused it to fail triggering the actual fallback, and let
it never decode a new frame, but also to get stuck on EOF.
Apparently this was broken by the "ctx->hwdec" check in the if condition
guarding the destroy call, and "ctx->hwdec = NULL;" was moved up
earlier, making this always dead code.
This should probably be refcounted or so, although that could make it
worse as well. For now, add a flag whether the device should be
destroyed.
Fixes#4735.
Since these need to be refcounted, we throw them directly into struct
mp_image instead of being part of mp_colorspace. Even though they would
semantically make more sense in mp_colorspace, having them there is
really awkward because mp_colorspace is passed around and stored a lot,
and this way their lifetime is exactly tied to the lifetime of the
mp_image associated with it.
Can be enabled via --vd-lavc-dr=yes. See manpage additions for what it
does.
This reminds of the MPlayer -dr flag, but the implementation is
completely different. It's the same basic concept: letting the decoder
render into a GPU buffer to avoid a copy. Unlike MPlayer, this doesn't
try to go through filters (libavfilter doesn't support this anyway).
Unless a filter can work in-place, DR will be silently disabled. MPlayer
had very complex semantics about buffer types and management (which
apparently nobody ever understood) and weird restrictions that mostly
limited it to mpeg2 style codecs. The mpv code does not do any of this,
and just lets the decoder allocate an arbitrary number of untyped
images. (No MPlayer code was used.)
Parts of the code based on work by atomnuker (starting point for the
generic code) and haasn (some GL definitions, some basic PBO code, and
correct fencing).
Commit d5702d3b95 messed up the order of destruction of the elements: it
destroyed the avctx before the hwaccel uninit, even though the hwaccel
uninit could access avctx. This could happen with some old hwaccels
only, such as D3D ones before the new libavcodec hwaccel API.
Fix this by making use of the fact that avcodec_flush_buffers() will
uninit the underlying hwaccel. Thus we can be sure avctx is not using
any hwaccel objects anymore, and it's safe to uninit the hwaccel.
Move the hwdec_dev dstruction code with it, because otherwise we would
in theory potentially create some dangling pointers in avctx.
This sets AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH, which some hwaccels
using the new generic API respect. These do profile selection in
libavcodec, so it can be controlled only with an external flag, instead
of in mpv code like it used to be done.
This partially reverts the change from a longer time ago to always build
DXVA2 and D3D11VA together.
To make it simpler, we change the following:
- building with ANGLE headers is now required to build D3D hwaccels
- if DXVA2 is enabled, D3D11VA is still forcibly built
- the CLI vo_opengl ANGLE backend is now under --egl-angle-win32
This is done to reduce the dependency mess slightly.
MaxCLL is the more authoritative source for the metadata we are
interested in. The use of mastering metadata is sort of a hack anyway,
since there's no clearly-defined relationship between the mastering peak
brightness and the actual content. (Unlike MaxCLL, which is an explicit
relationship)
Also move the parameter fixing to `fix_image_params`
I don't know if the avutil check is strictly necessary but I've included
it anyway to be on the safe side.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
