Resize the image based on the dimensions reported by
vo_get_src_dst_rects to correctly handle aspect ratio
that might be set/ignored.
Added pad-x and pad-y options for padding.
These options will be used to remove the extra padding.
Some terminals report the padding of 2px in the ioctl
dimensions which can't be used for displaying sixel
output. These options can be used for fine tuning
the output video resolution.
Now all the terminal size detection and calculation logic
is done in a single function at resize. Also top and left
values are computed from the dst_rect parameters to simplify
the logic for the aspect ratio based centering.
Additionally vo-sixel-rows and vo-sixel-cols options
have been added to enable the user to override the values
in case of failures with get_terminal_size2.
This commit also adds ability to handle video zoom correctly.
Whenever video-zoom is triggered, the src and dst rects
will be updated. Scaling seems to work well now.
This has no changes to mpv sixel playback behaviour.
This is required because currently the offset values
and the resolutions are being overwritten and not
remembered.
Having them in the same line made it hard to read them in the man page
since they are formatted in the same way and they look as though they
are only one definition.
Recent versions of mpv have applied security checks to --playlist
that previously only existed if playlist files were played as an
input directly. This commit documents this change and how to work
around it, in the event that playlist files are trusted.
Previously the mouse command never ended up in enter/leave keypresses
for the default section even when logically required, because input.c
does not know the area of the default section and relies on something
feeding it ENTER/LEAVE presses - which the VO typically does but the
mouse command didn't.
Now the mouse command feeds it ENTER/LEAVE if required.
It's possible to handle it differently and more consistently by:
1. reverting this commit.
2. Updating the default section area whenever the osd dimensions change.
3. Always ignore MOUSE_ENTER keys because the position is not known yet
(but MOSE_MOVE typically follows right away).
4. On mouse move: first generate ENTER/LEAVE if required.
That would guarantee consistency between mouse position and enter/leave
events but could be more sensitive to manage (the default section has
"infinite" area which is used to capture any event outside of specific
section areas), while this commit keeps consistency same as before and
depending on correct external feeding - which we now do better, even if
still not optimally (like before, it's still technically possible that
a script recieves MOUSE_ENTER and then reads the position before it got
updated after the ENTER).
Add a third field: "hover", which is updated from input.c after input
keys MP_KEY_MOUSE_LEAVE and MP_KEY_MOUSE_ENTER - which are typically
sent by the VO.
It's part of mouse-pos and not a new property because it's highly tied
to mouse-pos - it makes x/y invalid while the cursor doesn't hover the
window.
Unike mouse-move, no dummy command was generated, so we add dummy
command in order for observer notification to work even while nothing
is bound.
Like mouse-pos, clients could not detect whether the mouse pointer
hovers the window because the OSC force-binds the MOUSE_LEAVE key, and
now they can using the hover field.
The lua mp.get_mouse_pos() wrapper still returns only x, y because
that's what osc.lua needs. Other clients can simply read the property.
mp.get_mouse_pos() is undocumented and is no longer required - the
property can be used officially by any client now, however, osc.lua
uses it, and also some user scripts learnt to rely on it, so we keep
it - as a trivial wrapper around the new mouse-pos property.
This is a read-only MPV_NODE value with integer fields: x, y.
The values are unmodified from mp_input_get_mouse_pos(...).
Observer notification of this property is tied to the INPUT_PROCESSED
event, which fires after mouse move even if no command is bound
(dummy commands are generated if nothing is bound to ensure that
mp_input_get_mouse_pos returns the latest values - see ac927e39 ).
This allows clients such as JSON IPC to observe mouse position even
while the OSC is enabled - the OSC force-binds mouse move for most
of the window area, making it impossible for other clients to bind
mouse move without breaking the OSC.
Apparently mpv supports loading config files from the same directory as
the mpv.exe. This is a fallback of some sort. It used the old_home
mechanism.
I want to add a warning if old_home exists, but that would always show
the warning on win32. Obviously we don't want that.
Add a separate exe_dir entry to deal with that.
Untested, but probably works.
Mistakenly reverted as part of the default configuration directory
location switch-back in aa18a8e1cd.
Separation of the mpv executable directory from old_path is a
good change now that we warn about the old_config directory also
existing.
Fixes#8232Fixes#8244Fixes#8262
This can be viewed at page 4 of the internal stats display (i or I).
CPU time report is the same as at lua.c, but untested - doesn't seem
to work on windows - also not for lua.
TL;DR: Set env MPV_LEAK_REPORT=1 to enable js memory reporting stats.
This also almost doubles the memory usage by js scripts.
For memory reporting, we don't have enough info by default, because
even when using a custom allocator, mujs doesn't report the old size
(on free or realloc) because it doesn't track this value, and as
a result we can't track the overall size.
Our option are either to track the size of each allocation on our own,
or use talloc which tracks this value.
However, using talloc for mujs allocations adds a considerable
overhead, and almost doubles(!) the overall memory used, because each
individual allocation includes a considerable talloc header, and mujs
does many small allocations.
So our solution is that by default we behave like previously - not
using a custom allocator with mujs, and stats does not display memory
usage for js scripts.
However, if the env var MPV_LEAK_REPORT is set to 1, then we use
a custom allocator with talloc and track/report memory usage.
We can't switch allocator at runtime, so an mpv instance either tracks
or doesn't track js scripts memory usage, according to the env var.
(we could use a property and apply it whenever a new script starts,
so that it could change for newly launched scripts, but we don't).
- Explain which properties are writeable.
- Mark edition-list/N/id as writable.
- Remove (R) from some read-only properties since none of the others
have it.
- Add osd-dimension/ to its subproperties.
- options/<name> isn't read-only.
- focused works on macOS because of 82eda2e. Though it shouldn't be
possible to observe it without raising VO_EVENT_FOCUS.
The picture type is explained in /usr/include/libavutil/avutil.h
Other subproperties in /usr/include/libavutil/frame.h
And there is a more detailed explanation for repeat_pict in
/usr/include/libavcodec/avcodec.h
When possible, refer to booleans with "Whether..." since it can refer to
both yes (using input.conf and mp.get_property) and true (using the JSON
IPC or mp.get_property_native/bool), else explicitly say yes/true.
Say "true" for subprocess and osd-overlay named arguments since you
can't use them in input.conf and you will typically use them with the
boolean true in the named arguments, like the subprocess example in the
manpage does (though the string "yes" also works).
Subproperties that can't be accessed with the / syntax like
demuxer-cache-state's bof-cached and eof-cached always return true,
never yes.
Set pcm state to SND_PCM_STATE_XRUN in case -EPIPE is received,
and handle this state as per the usual logic.
This way snd_pcm_prepare gets called, and the loop continued.
Inspired by a patch posted by malc_ on #mpv.
The pointer button event had no code to handle any modifier keys. So
this meant input combinations like Shift+MTBN_LEFT did not work. Fix
this by ripping out the modifier-checking code in keyboard key event to
a separate function and using it for both the keyboard and mouse events.
In the case of the mouse, it is possible that the keyboard may not exist
so be sure to check before trying to get any modifiers. Fixes#8239.
30dcfbc is a workaround for incorrect border sizes that could occur on
sway/wlroots in certain edge cases. This seemed harmless enough, but it
turns out that on mutter the extra wl_surface_commit somehow causes the
window always go to the top left of the screen after you leave
fullscreen. No idea why this occurs, but the original commit is a
workaround a sway bug and causing regressions for other users isn't
right despite the author being biased towards sway/wlroots.
This reverts commit 30dcfbc9cb.
Based on the implementation of ffmpeg's sixel backend output written
by Hayaki Saito
https://github.com/saitoha/FFmpeg-SIXEL/blob/sixel/libavdevice/sixel.c
Sixel is a protocol to display graphics in a terminal. This commit
adds support to play videos on a sixel enabled terminal using libsixel.
With --vo=sixel, the output will be in sixel format.
The input frame will be scaled to the user specified resolution
(--vo-sixel-width and --vo-sixel-height) using swscaler and then
encoded using libsixel and output to the terminal. This method
requires high cpu and there are high frame drops for 720p and
higher resolution videos and might require using lesser colors and
have drop in quality. Docs have all the supported options listed
to fine tune the output quality.
TODO: A few parameters of libsixel such as the sixel_encode_policy
and the SIXEL_XTERM16 variables are hardcoded, might want to
expose them as command line options. Also the initialization
resolution is not automatic and if the user doesn't specify the
dimensions, it picks 320x240 as the default resolution which is not
optimal. So need to automatically pick the best fit resolution for
the current open terminal window size.
This allows keybindings such as:
a script-message-to console type "seek :0 absolute" 6
% script-message-to console type "seek absolute-percent" 6
The cursor position 0 isn't allowed because it has the weird effect of
filling the console with the text twice, leaving the cursor in the
middle.
Negative positions would put the cursor n characters before the end, and
positions greater than the text's length at the end. They seem to work
at first, but the console breaks when you move the cursor, so they
aren't allowed.
It seems that float values don't cause issues, but I'm using the
argument's floor anyway to be safe. Using >= 1 instead of > 0 ignores
values like 0.5.
The wl_pointer interface defines button argument as “a button code as
defined in the Linux kernel's linux/input-event-codes.h header file,
e.g. BTN_LEFT.”
We could #define these few buttons ourselves, but there is no system to
test it on, so for now let’s disable Wayland support on them.
This is a call to non-Linux system maintainers, please help test this
backend on your system and report issues you find, or even working
state.
Wayland’s wl_pointer interface describes the button event’s argument as
being taken from linux/input-event-codes.h, so there is no need to
include the more generic linux/input.h.
This introduces the delete-watch-later-config command, to complement
write-watch-later-config. This is an alternative to #8141.
The general problem that this change is attempting to help solve has
been described in #336, #3169 and #6574. Though persistent playback
position of a single file is generally a solved problem, this is not
the case for playlists, as described in #8138.
The motivation is facilitating intermittent playback of very large
playlists, consisting of hundreds of entries each many hours
long. Though the current "watch later" mechanism works well - provided
that the files each occur only once in that playlist, and are played
only via that playlist - the biggest issue is that the position is
lost completely should mpv exit uncleanly (e.g. due to a power
failure). Existing workarounds (in the form of Lua scripts which call
write-watch-later-config periodically) fail in the playlist case, due
to the mechanism used by mpv to determine where within a playlist to
resume playback from.
The missing puzzle piece needed to allow scripts to implement a
complete solution to this problem is simply a way to clean up the
watch-later configuration that the script asked mpv to write using
write-watch-later-config. With that in place, scripts can then
register an end-file event listener, check the stop playback reason,
and in the "eof" and "stop" case, invoke delete-watch-later-config to
delete any saved positions written by write-watch-later-config. The
script can then proceed to immediately write a new one when the next
file is loaded, which altogether allows mpv to resume from the correct
playlist and file position upon next startup.
Because events are delivered and executed asynchronously,
delete-watch-later-config takes an optional filename argument, to
allow scripts to clear watch-later configuration for files after mpv
had already moved on from playing them and proceeded to another file.
A Lua script which makes use of this change can be found here:
https://gist.github.com/CyberShadow/2f71a97fb85ed42146f6d9f522bc34ef
(A modification of the one written by @Hakkin, in that this one takes
advantage of the new command, and also saves the state immediately
when a new file is loaded.)
Testing kwinft out (kwin fork), it was discovered that sometimes it
would return a ust value of 0 which subsequently resulted in incorrect
presentation statistics (i.e. large negative numbers which are obviously
impossible). Arguably, it shouldn't return 0s, but a workaround for mpv
in this case is harmless.
As we are now on 20.04, these packages are now available in the
repositories. Additionally, they don't need to be separately pulled
in, as gcc-mingw-w64 already does that.
Shreesh Adiga
Emanuele Torre
Leo Izen
Avi Halachmi (:avih)
wm4
sfan5
Ben Kerman
Guido Cella
Jan Ekström
Dudemanguy
der richter
soredake
Ricardo Constantino
Emmanuel Gil Peyrot
Mia Herkt
Vladimir Panteleev
Niklas Haas