Also sneak in some cosmetics.
setmode() exists on Windows/msvcrt only, so there's no need for a
config test.
I couldn't reproduce the problem with seekable pipes on wine, so axe
it. (I'm aware that it still could be an issue on real Windows.)
For some reason, we support writeable streams. (Only encoding uses that,
and the use of it looks messy enough that I want to replace it with FILE
or avio today.)
It's a chaos: most streams do not actually check the mode parameter like
they should. Simplify it, and let streams signal availability of write
mode by setting a flag in the stream info struct.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
This is mostly covered by the OSX workaround, if the timeout is very
high. It also means that with systems using 32 bit time_t, the time will
overflow 2036 already, instead of 2037, but we don't consider this a
problem.
_WIN_LAYER is apparently an old GNOME thing (also explains why there is
a function vo_x11_get_gnome_layer() involved in this code). Prefer the
NetWM hints over this. This just moves the NetWM case if-body over the
_WIN_LAYER one.
You can't use identifiers starting with "_" and an uppercase letter in
application programs. They are reserved by the C standard.
Unrelated change: drop unused/misleading vo_wm_NETWM define.
I can only assume the old code was wrong. EWMH does not document
anything with _WIN_LAYER. Instead, you have to toggle the state using a
client message. We also remove these weird non-sense fallbacks, like
using _NET_WM_STATE_BELOW - what the hell?
Small fixes for the OSC, seektooltip now enabled by default.
Option-parser now moved to separate package, can be used from
other scripts, see DOCS/man/en/lua.rst.
OSC config file location moved to lua-settings/osc.conf
Some operating systems apparently can't deal with really long timeouts
in pthread_cond_timedwait(). Passing a time about 300000 in the future
makes the call return immediately. (tv_sec/time_t doesn't overflow in
this situation.) Reduce the wait time to about 100 days, which seems
to work fine.
The list of affected OSes follows: OSX
Probably more correct and better readable. Although the special-casing
of 0x1p63 is weird in terms of readability (the value itself is
INT64_MAX+1, so it's already outside of range, but INT64_MAX is not
exactly representable with double precision).
The quit command has an optional argument that is used as exit code.
Extend that to the quit_watch_later command. Actually, unify the
implementations of the two commands.
Requested in #798.
This usually can't happen, because even if time_us (first input value)
is INT64_MAX, the value added to tv_sec will be about 2^43, and tv_sec
will be <2^31, far below a possible overflow in 64 bits. But should
time_t be 32 bits (32 bit Linux/Windows?), an overflow could happen.
Integrate it with the existing surface allocator in vdpau.c. The changes
are a bit violent, because the vdpau API is so non-orthogonal: compared
to video surfaces, output surfaces use a different ID type, different
format types, and different API functions.
Also, introduce IMGFMT_VDPAU_OUTPUT for VdpOutputSurfaces wrapped in
mp_image, rather than hacking it. This is a bit cleaner.
black_pixel is an (apparently necessary) 1x1 black surface used for
clearing the screen. It was allocated in RGB mode only, but is sometimes
used in YUV mode too.
In at least 2 places, we want to "shift" positional parameters by a
certain amount, or remove all parameters if there are fewer parameters.
bash handled this just fine, but dash vomits upon it. POSIX shell allows
both behaviors, so we have to fix it.
Fix a comparison done with "==" instead of "=".
Cover art is treated like video, but is not really video. In one case,
the audio sync code was accidentally still active. Fixes cover art
playback with --ao=null. (This is due to ao_null's latency emulation.
Although it's not very clear whether that is actually correct...)
vo_vdpau currently has a video queue larger than 1 entry, which causes
the video display code to never queue display the video frame. This is
because we consider cover art an endless stream of frames decoded from
the same source packet, and include special logic to actually only
decode and display 1 frame.
Also, make decode_image() also signal EOF in the cover art case.
Without this change, the compiler uses by default the "talloc.h" file
installed by the package libtalloc within /usr/local/include. Found and
tested on OpenBSD but FreeBSD has the same patch on its ports tree.
This should be more correct. The builtins were made to directly map to
C11, and the way we use them is now relatively close to how gcc
implements atomics in 4.9. In particular, we make use of the load and
store builtins.
I'm not entirely sure why gcc didn't support stdatomic.h in 4.8 already.
Maybe support for the builtins was incomplete or broken - so there's a
lot of room for doubt about the correctness of this.
In my opinion, we shouldn't use atomics at all, but ok.
This switches the mpv code to use C11 stdatomic.h, and for compilers
that don't support stdatomic.h yet, we emulate the subset used by mpv
using the builtins commonly provided by gcc and clang.
This supersedes an earlier similar attempt by Kovensky. That attempt
unfortunately relied on a big copypasted freebsd header (which also
depended on much more highly compiler-specific functionality, defined
reserved symbols, etc.), so it had to be NIH'ed.
Some issues:
- C11 says default initialization of atomics "produces a valid state",
but it's not sure whether the stored value is really 0. But we rely on
this.
- I'm pretty sure our use of the __atomic... builtins is/was incorrect.
We don't use atomic load/store intrinsics, and access stuff directly.
- Our wrapper actually does stricter typechecking than the stdatomic.h
implementation by gcc 4.9. We make the atomic types incompatible with
normal types by wrapping them into structs. (The FreeBSD wrapper does
the same.)
- I couldn't test on MinGW.
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
This works around an issue in OpenBox: OpenBox apparently sizes the
normal window incorrectly if aspect ratio hints are set, and the window
size is off by 1 pixel. Then, when going fullscreen and leaving
fullscreen again, mpv sets the hints based on OpenBox' broken window
size, and as result, OpenBox sizes the window incorrectly and is off by
1 pixel again - so it's 2 pixels off in total. The error gets more
visible, the more often you toggle fullscreen mode.
Work this around by not setting the window hints if we don't need to.
Actually we only need to do this when the video is resized during
fullscreen, which happens rarely. Under normal circumstances, leaving
fullscreen mode requires that the WM restores the old state.
As such, this commit is not only a workaround, but actually a cleanup.
Note that we do need to set the hints when leaving fullscreen if the
window has resized: even though we set the hints in
vo_x11_highlevel_resize (called by vo_x11_config_vo_window), this
doesn't seem to have an effect (at least on IceWM), so we have to do it
after that.
Side note: ot seems commit 625ad57a strangely triggered the OpenBox
issue according to user reports; I'm not sure why.
Drop: sami, vplayer, rt, pjs, mpsub, aqt, jacosub. None of these seem
to be actually in use, except sami. Sami is very complex, and the
results subreader produces are not very useful.
For all these formats, there are still parsers in FFmpeg. We remove the
subreader implementation, because it might contain security relevant
bugs and such. (This is old, unmaintained C string parsing code, written
in times where absolutely nobody cared about security. The kind of
awesome code.)
We keep the other formats, because they're (mostly) commonly used and
relatively simple, for UTF16 support (still missing in FFmpeg), and for
the sake of Libav.
wm4
Alessandro Ghedini
ChrisK2
Yomi0
Jerome Leclanche
Juan Francisco Cantero Hurtado