stream ftp: Pass full buffer size to snprintf
Previously the buffer size was always passed as one less than
the underlying buffer's size. This is not using the underlying
buffer to its full potential according to the C99 standard. The
last byte of the buffers were never used.
No vulnerabilities should have been caused by this mistake because
the strings stored in the buffers were zero terminated at all
times. Neither were out-of-array writes nor reads possible.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35488 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: open_f: Mark parameter file_format unused
We have nothing to say about it, so we do not set *file_format.
No need for compilers to emit a warning about it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35489 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Set type to STREAMTYPE_STREAM
Previously this was not set at all from within the stream_ftp module.
This caused the run-time warning message "Streams need a type!".
The actual behaviour should not be affected by this change.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35490 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Use C99 designated initializers
Simplify the initialization of the stream private struct's defaults.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35491 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Remove unneeded cast
At worst these kind of casts can hide real errors. As it is, it is
just not needed at all, thus remove it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35492 b3059339-0415-0410-9bf9-f77b7e298cf2
When the cache fill status goes below a certain threshold, automatically
pause the player. When the cache is filled again, unpause again.
This is intended to help with streaming from http. It's better to pause
a while, rather than exposing extremely crappy behavior when packet
reads during decoding block the entire player.
In theory, we should try to increase the cache if underruns happen too
often. Unfortunately, changing the cache implementation would be very
hard, because it's insane code (forks, uses shared memory and "volatile"
etc.). So for now, this just reduces the frequency of the stuttering if
the network is absolutely too slow to play the stream in realtime.
The internal mplayer http implementation is terrible and old. Try to use
ffmpeg instead. Enable ffmpeg https as well (we don't have native
support for it and never will).
Enable the cache for ffmpeg streams. In theory, we want to enable the
cache for network streams only (or at least, not enable it for files),
but there doesn't seem to be any way to query this. ffmpeg has its own
read-cache, but apparently it doesn't get filled asynchronously (only
to the degree internal socket/kernel buffers do).
Should it turn out that the mplayer implementation is better than
ffmpeg's in some way (unlikely), this commit might be reverted until
ffmpeg is ready. So far, the ffmpeg implementation seems to work very
well though.
The original mplayer stream implementation is made available under
"mp_http://" and "mp_http_proxy://". This is for testing, until the
http implementation is completely removed. Note that this is unlikely
to happen soon: ffmpeg doesn't support Microsoft streaming, while
mplayer has some support. This code has dependencies on http.
Note: "http_proxy://" doesn't work anymore. Use "httpproxy://" to get
the ffmpeg implementation of it.
Using https requires enabling OpenSSL in ffmpeg by adding
the --enable-openssl switch to ffmpeg's configure.
This commit is separate from the previous one to separate our own
changes from changes merged from mplayer2 (as far as that was possible).
Make it easier for stream implementations to request being cached. Set
a default cache size in stream.c, and remove them from various stream
implementations. Only MS streaming support sets a meaningful cache size.
Make querying cache size saner. This reduces the amount of #ifdefs
needed.
Code enabling the cache by default for network streams did that by
modifying the value of the "cache" option. This wasn't sane, as
multiple streams may be created and all share the same options. Change
the code to not modify options but store data in the stream instance
instead.
Conflicts:
core/mplayer.c
demux/demux.c
stream/cache2.c
stream/network.c
stream/network.h
stream/pnm.c
stream/stream.c
stream/stream_rtp.c
Merged from mplayer2 commit e26070. Note that this doesn't solve any
actual bug, as the playlist crashing bug has been fixed before.
Since the global cache size option value is not overwritten anymore, the
option doesn't need to be restored on end of playback (M_OPT_LOCAL).
libavdevice supports various "special" video and audio inputs, such
as screen-capture or libavfilter filter graphs.
libavdevice inputs are implemented as demuxers. They don't use the
custom stream callbacks (in AVFormatContext.pb). Instead, input
parameters are passed as filename. This means the mpv stream layer has
to be disabled. Do this by adding the pseudo stream handler avdevice://,
whose only purpose is passing the filename to demux_lavf, without
actually doing anything.
Change the logic how the filename is passed to libavformat. Remove
handling of the filename from demux_open_lavf() and move it to
lavf_check_file(). (This also fixes a possible bug when skipping the
"lavf://" prefix.)
libavdevice now can be invoked by specifying demuxer and args as in:
mpv avdevice://demuxer:args
The args are passed as filename to libavformat. When using libavdevice
demuxers, their actual meaning is highly implementation specific. They
don't refer to actual filenames.
Note:
libavdevice is disabled by default. There is one problem: libavdevice
pulls in libavfilter, which in turn causes symbol clashes with mpv
internals. The problem is that libavfilter includes a mplayer filter
bridge, which is used to interface with a set of nearly unmodified
mplayer filters copied into libavfilter. This filter bridge uses the
same symbol names as mplayer/mpv's filter chain, which results in symbol
clashes at link-time.
This can be prevented by building ffmpeg with --disable-filter=mp, but
unfortunately this is not the default.
This means linking to libavdevice (which in turn forces linking with
libavfilter by default) must be disabled. We try doing this by compiling
a test file that defines one of the clashing symbols (vf_mpi_clear).
To enable libavdevice input, ffmpeg should be built with the options:
--disable-filter=mp
and mpv with:
--enable-libavdevice
Originally, I tried to auto-detect it. But the resulting complications
in configure did't seem worth the trouble.
This change was split into 8 patches. Squash them together, as they
affect stream_ftp.c only.
stream ftp: readline: Fix off-by-one error
Even if max bytes are available read at most max - 1 bytes.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35427 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/stream_ftp.c
stream ftp: readline: Always initialize output parameter buf
Only exception if passed parameter max is less than or equal
to zero. That cannot happen with the current code.
Additionally change readresp function to always copy the first
response line if the parameter rsp is non-NULL. This fixes some
error reporting that used uninitialized stack arrays.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35428 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: readline: Always try to read complete lines
If there is not enough space in the provided line buffer just
skip the remaining bytes until reaching EOL.
Usually we are only interested in the first 5 characters and
for everything else the (on-stack) response buffer should still
be big enough.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35429 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Revise file descriptor usage
* Set unbound descriptor variables to -1
* Always test >= 0 to see if a variable refers to a valid descriptor
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35430 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Only send QUIT command if connected
Do not attempt to send commands without control connections.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35431 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Create buffers before opening control connection
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35432 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Allocate command buffer on-heap
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35433 b3059339-0415-0410-9bf9-f77b7e298cf2
stream ftp: Increase command buffer size
Allow for more longish file names (be it because of length or more
lengthy characters).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35434 b3059339-0415-0410-9bf9-f77b7e298cf2
The language string was dynamically allocated, which completely fails
if the cache is forked (which it usually is). Change it back to a fixed
length string, like the original code had it.
Update endpos each time libavformat asks for it.
Fixes playback of still downloading files to not stop before we
really reached the end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35107 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demux_lavf.c
Change STREAM_CTRL_GET_SIZE argument type from off_t to
uint64_t.
Also fix the incorrect type of the uint64_res variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35360 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demux_lavf.c
libmpdemux/muxer_lavf.c
Note: also merges the "forgotten" cache support from r35107.
Comment out unused code
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35359 b3059339-0415-0410-9bf9-f77b7e298cf2
Removing mmsu-related code
MMSU was never supported by MPlayer, and the protocol has been
deprecated. Since the code is not in use at all, Removing it
should not break anything.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35420 b3059339-0415-0410-9bf9-f77b7e298cf2
Most of these are reimar fixing issues found by Coverity static
analyzer, and possibly some more cleanup commits independent from
this.
Since these commits are rather noisy, squash them all together.
Try to make code a bit clearer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35294 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/out/ao_alsa.c
Check the correct variable for NULL.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35323 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless unreachable code (the loop condition already checks
the 0xff case).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35325 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix typo that might have caused reading beyond the string end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35326 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not needlessly use "long" types.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35331 b3059339-0415-0410-9bf9-f77b7e298cf2
Use AV_RB32 to avoid sign extension issues and validate offset before using it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35332 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove nonsense casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35343 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix crash in case sh_audio allocation failed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35348 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix potential NULL dereference.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35351 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpcodecs/ad_ffmpeg.c
Note: Slightly modified.
Fix malloc failure check to check the correct variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35353 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid code duplication and pointless casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35363 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Error out if an invalid channel list name was specified
instead of continuing and reading outside array bounds
all over the place.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35364 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Make array "static const".
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35365 b3059339-0415-0410-9bf9-f77b7e298cf2
Properly free resources even when encountering many
parse errors.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35367 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
parser-cfg.c
Avoid leaks in error handling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35380 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not do sign comparisons on "char" type which can be both signed or unsigned.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35381 b3059339-0415-0410-9bf9-f77b7e298cf2
Free cookies file data after parsing it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35382 b3059339-0415-0410-9bf9-f77b7e298cf2
http_set_field only makes a copy of the string, so we still need to
free it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35383 b3059339-0415-0410-9bf9-f77b7e298cf2
check4proxies does not modify input URL, so mark it const.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35390 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove proxy "support" from stream_rtp and stream_upd, trying
to use a http proxy for UDP connections makes no sense.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35394 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/stream_rtp.c
stream/stream_udp.c
Add url_new_with_proxy function to reduce code duplication and memleaks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35395 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/pnm.c
stream/stream_live555.c
stream/stream_nemesi.c
stream/stream_rtsp.c
Fix off-by-one errors in file descriptor validity checks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35402 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless cast.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35403 b3059339-0415-0410-9bf9-f77b7e298cf2
Abort when opening the file failed instead of calling
"write" with an invalid descriptor.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35404 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless local variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35411 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/http.c
Remove the code that attempted to read cookie files from well-known
browser locations. This code was written for ancient browsers, and only
knew about Mozilla and Netscape. While it's possible that these browsers
are still alive and still use the same config locations and cookie file
formats, the only Mozilla-based browser that still matters is Firefox.
Firefox uses a sqlite database for cookies, located in a slightly
different config path.
Just remove this code.
The function fixup_network_stream_cache() accesses stream->opts, which
is NULL in some cases when loading playlists. stream->opts is a pointer
to the global MPOpts struct. For simplicity, this parameter is left
NULL in some cases. Usually, this doesn't matter, because barely
anything in stream/ uses MPOpts anyway.
Hack-fix this for now by not accessing MPOpts and disabling the stream
cache in this case. Calling open_stream() with options==NULL now
basically means: do not use cache settings.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
Found by clang analyzer. This called strlen(NULL), if the uri field
in the http_hdr wasn't set. It seems all callers of this function set
the field properly, so remove the bogus fallback to "/".
Use snprintf instead of sprintf.
No good reason beyond paranoia and Coverity complaining about it.
In a very theoretical, construed case the adds might overflow
or the environment might change in-between the getenv calls.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35307 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace sprintf with snprintf.
To my knowledge the only "real" issue this fixes
is that setting certain environment variables to
very long strings might have caused overflows.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35306 b3059339-0415-0410-9bf9-f77b7e298cf2
Use mp_asprintf in make_noauth_url and make_http_proxy_url.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32971 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: cboesch
Conflicts:
stream/url.c
Note: the mp_asprintf() function was introduced in r32970, and put
into its own files. We just put that directly into url.c, as we use
talloc_asprintf() in general, and mp_asprintf() is for url.c code only.
(Making url.c use talloc would probably result in a big mess.)
Make proxy and url parameter const in get_noauth_url and get_http_proxy_url.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32972 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: cboesch
Add new stream control command STREAM_CTRL_GET_CURRENT_TITLE for DVDs.
This provides the current title (aka track) number of a DVD.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35263 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow STREAM_CTRL_GET_NUM_TITLES with cache enabled.
This is missing in r34474.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35258 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid sleeping 0 ms, this can cause sleep to be not called at all.
This will then cause long hangs e.g. when sleeping on single-CPU/core computers.
Should fix bug #2084.
Patch suggested by Visenri [visenri yahoo es]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35119 b3059339-0415-0410-9bf9-f77b7e298cf2
Explicitly signal EOF when reaching the end of a file/pipe.
Fixes a 4 second delay due to stream_reconnect for e.g.
echo | mplayer -
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35112 b3059339-0415-0410-9bf9-f77b7e298cf2
Make stream_ffmpeg handle rtsp:// URLs by default, without requiring
ffmpeg://rtsp://. Previously (after removal of other rtsp
implementations) rtsp:// fell back to using HTTP, which was unlikely
to work.
Also add lavf:// as an alternative to ffmpeg:// to force the stream
implementation. Since libavformat can come from Libav rather than
FFmpeg, using the ffmpeg name in the prefix is misleading.
open_stream() and open_output_stream() checked for filename==NULL, and
if true, printed an error message asking to report this as bug.
Internal logic errors should just crash. Use assert() instead.
Clean up handling of libquvi (which resolves URLs of streaming sites
into URLs to the actual media playable by mpv). Move the code out of
open.c to quvi.c, and invoke it explicitly from mplayer.c, instead of
trying to resolve every filename passed to open_stream().
This allows easily passing metadata from the quvi context to the
frontend. Expose QUVIPROP_PAGETITLE as "media-title" property, and use
that instead of "filename" for the mplayer window title. (For YouTube,
this is the video title.) It's cleaner too.
Handle a potential reliability issue: check quvi_getprop return values.
Since open.c contains barely anything but the open_stream() stub, move
that to stream.c and delete open.c.
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
Previously, Matroska source files other than the initially opened one
were always accessed without caching. Enable cache for extra files
too. A separate cache process/thread is started for each file, which
is less than optimal but probably better than no caching if the user
explicitly enabled cache. This commit only implements caching for
Matroska ordered chapters (not for EDL timeline).
To build the timeline we need to demux the files in the current
directory to look for segments with matching uuid. This first demux is
done with no cache since we don't need to read a lot of the stream. If
the file is recognized as one of the needed sources it's reopened with
cache enabled.
Also move the stream_cache_size global variable to the options struct.
Conflicts:
cfg-mplayer.h
mplayer.c
stream/stream.h
timeline/tl_matroska.c
Add all subtitle tracks as reported by libdvdread at playback start.
Display language for subtitle and audio tracks. This commit restores
these features to the state when demux_mpg was default for DVD playback,
and makes them work with demux_lavf and the recent changes to subtitle
selection in the frontend.
demux_mpg, which was the default demuxer for DVD playback, reordered
the subtitle streams according to the "logical" subtitle track number,
which conforms to the track layout reported by libdvdread, and is what
stream_dvd expects for the STREAM_CTRL_GET_LANG call. demux_lavf, on
the other hand, adds the streams in the order it encounters them in
the MPEG stream. It seems this order is essentially random, and can't
be mapped easily to what stream_dvd expects.
Solve this by making demux_lavf hand out the MPEG stream IDs (using the
demuxer_id field). The MPEG IDs are mapped by mplayer.c by special
casing DVD playback (map_id_from/to_demuxer() functions). This mapping
is essentially the same what demux_mpg did. Making demux_lavf reorder
the streams is out of the question, because its stream handling is
already messy enough.
(Note that demux_lavf doesn't export stream IDs for other formats,
because most time libavformat demuxers do not set AVStream.id, and we
don't know which demuxers do. But we know that MPEG is safe.)
Another major complication is that subtitle tracks are added lazily, as
soon as the demuxer encounters the first subtitle packet for a given
subtitle stream. Add the streams in advance. If a yet non-existent
stream is selected, demux_lavf must be made to auto-select that subtitle
stream as soon as it is added. Otherwise, the first subtitle packet
would be lost. This is done by DEMUXER_CTRL_PRESELECT_SUBTITLE.
demux_mpg didn't need this: the frontend code could just set ds->id to
the desired stream number. But demux_lavf's stream IDs don't map
directly to the stream number as used by libdvdread, which is why this
hack is needed.
af_format.h declares some symbols which are defined in format.c. The
fact that af_format.c is a completely unrelated file is rather
confusing. Having the header and implementation file use the same base
name is more uniform. (af_format.c is the audio conversion filter, while
af_format.h and format.c are about audio formats and their properties.)
Also fix all source files which include this file.
The <libavutil/avutil.h> stopped including <libavutil/common.h>
recursively in recent ffmpeg/libav git revisions. As a result, some
files no longer got needed definitions, causing a build failure.
Modify #include lines in various files to fix build with the latest
versions of ffmpeg/libav headers.
The main excuse for removing this is that LIVE555 deprecated the API
the mplayer implementation was using. The old API still seems to be
somewhat supported, but must be explicitly enabled at LIVE555
compilation, so mplayer won't always work on any user installation.
The implementation was also very messy, in C++, and FFmpeg support is
available as alternative.
Remove it completely.
libavformat replaces demux_audio completely. I don't know/care what
vivo (demux_viv) is. libavformat has a Real demuxer; it seems it works
slightly better, with a different set of bugs.
When the internal mplayer MPEG demuxer was removed (commit 1fde09db),
the default demuxer when using dvdnav was set to libavformat. Now it
turns out that this doesn't work with libavformat. It will terminate
playback right after the audio runs out (instead of looping it like the
video, or whatever it's supposed to do). I'm not sure what exactly the
problem is, but since 1. even mplayer-svn can't handle DVD menus
directly (missing highlights), 2. DVD menus are essentially worthless,
and 3. I don't directly watch DVDs, don't bother with it and remove it.
For basic playback, there's still libdvdread support.
Also, use pkg-config for libdvdread, and drop support for in-tree
libdvdread. Remove support for in-tree libdvdcss as well.
Remove the win32 loader - the win32 emulation layer, as well as the
code for using DirectShow/DMO/VFW codecs. Remove loading of xanim,
QuickTime, and RealMedia codecs.
The win32 emulation layer is based on a very old version of wine.
Apparently, wine code was copied and hacked until it was somehow able
to load a limited collection of binary codecs. It poked around in the
code segment of some known binary codecs to disable unsupported win32
API calls to make them work. Example from module.c:
for (i=0;i<5;i++) RVA(0x19e842)[i]=0x90; // make_new_region ?
for (i=0;i<28;i++) RVA(0x19e86d)[i]=0x90; // call__call_CreateCompatibleDC ?
for (i=0;i<5;i++) RVA(0x19e898)[i]=0x90; // jmp_to_call_loadbitmap ?
for (i=0;i<9;i++) RVA(0x19e8ac)[i]=0x90; // call__calls_OLE_shit ?
for (i=0;i<106;i++) RVA(0x261b10)[i]=0x90; // disable threads
Just to show how utterly insane this code is. You wouldn't want even
your worst enemy to have to maintain this. In fact, it seems nobody
made major changes to this code ever since it was committed.
Most formats can be decoded by libavcodecs these days, and the loader
couldn't be used on 64 bit platforms anyway. The same is (probably)
true for the other binary codecs.
General note about how support for win32 codecs could be added back:
It's not possible to replace the win32 loader code by using wine as
library, because modern wine can not be linked with native Linux
programs for certain reasons. It would be possible to to move DirectShow
video decoding into a separate process linked with wine, like the
CoreAVC-for-Linux patches do. There is also the mplayer-ww fork, which
uses the dshownative library to use DirectShow codecs on Windows.
stream_file always printed "File not found" if it could not open a
file, even though this could be due to other reasons such as
permission problems. Print strerror() information instead. This
changes the output for "mplayer /etc/shadow" from
File not found: '/etc/shadow'
to
Cannot open file '/etc/shadow': Permission denied
The commit 74df1d8e05 (and f752212c62) replaced the configure
endian check with byte order macros defined by standard headers. It
turns out that MinGW-w64 actually doesn't define these macros in the
sys/types.h system header. (I assumed it does, because a quick test
seemed to work. But that was because gcc -W -Wall doesn't warn against
undefined macros. You need -Wundef for that.) MinGW-w64 has a
sys/params.h header defining these macros, but sys/types.h doesn't
include it, so it's useless without special casing the mplayer code.
Add a hack top configure instead. Define the macros directly, and
assume MinGW-w64 only works on little endian machines.
The other changes are basically random typos and superficial oversights.
Options parsing used to be ambiguous, as in the splitting into option
and values pairs was ambiguous. Example:
-option -something
It wasn't clear whether -option actually takes an argument or not. The
string "-something" could either be a separate option, or an argument
to "-option". The code had to call the option specific parser function
to resolve this.
This made everything complicated and didn't even have a real use. There
was only one case where this was actually used: string lists
(m_option_type_string_list) and options based on it. That is because
this option type actually turns a single option into a proxy for several
real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options
suffixed with "-clr" are the only options of this group which take no
arguments.
This is ambiguous only with the "old syntax" (as shown above). The "new"
option syntax always puts option name and value into same argument.
(E.g. "--option=--something" or "--option" "--something".)
Simplify the code by making it statically known whether an option takes
a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's
set, the option parser assumes the option takes no argument.
The only real ambiguity left, string list options that end on "-clr",
are special cased in the parser.
Remove some duplication of the logic in the command line parser by
moving all argument splitting logic into split_opt(). (It's arguable
whether that can be considered code duplication, but now the code is a
bit simpler anyway. This might be subjective.)
Remove the "ambiguous" parameter from all option parsing related code.
Make m_config unaware of the pre-parsing concept.
Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly
usable as per-file options.)
stream_pvr: Use sizeof() to get destination buffer size.
The code in lines 382/384 used the wrong constant.
Fixes bug #2066.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34895 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Detect prematurely closed connection.
Then we get a streaming_stopped status but we have
a end_pos and have not reached it yet, do not accept
it as EOF but instead try reconnection.
For example a forced restart of a webserver will usually
result in the connection being closed before EOF.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34873 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Retry reconnecting several times.
Also add a delay, otherwise a server closing any incoming
connection immediately would make MPlayer stop even if it happens
only for 1 second or so.
With this change, no server/network outage of any kind shorter
than 5 seconds should cause MPlayer to give up anymore.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34871 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Code cleanup: Use a stream_control instead of global functions to
get the language associate with a audio or subtitle stream from
the streaming layer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34736 b3059339-0415-0410-9bf9-f77b7e298cf2
Support showing the stream language with br:// playback.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34737 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix DVDs showing the subtitle language as "unknown"
for a long time.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34777 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Note: heavily modified by wm4 for this fork of mplayer.
Remove variable that is only assigned but never used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34791 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow using a cache size of up to 4 TB.
Obviously anything close to 4 GB will always fail
on 32 bit systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34792 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace off_t by int64_t in cache code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34793 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove casts that are no longer necessary.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34794 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix header file after r34793.
Patch by Stephen Sheldon, sfsheldo gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34802 b3059339-0415-0410-9bf9-f77b7e298cf2
Put #include <inttypes.h> into the header file where it should be.
Reported by Stephen Sheldon, sfsheldo gmail com.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34798 b3059339-0415-0410-9bf9-f77b7e298cf2
Correct r34798.
The header only needs stdint.h while the C file needs inttypes.h.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34799 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
This provides the total number of titles (aka tracks) of CDs / VCDs / DVDs.
Additionally, add a titles property to the get_property slave command.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34474 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: ib
This avoid some strange differences in behaviour between -cache and -nocache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34461 b3059339-0415-0410-9bf9-f77b7e298cf2
cache2: fix seeking with e.g. flv files
This is a regression that was introduced in r34461.
Found and bisected by Anssi Hannula [anssi.hannula iki fi].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34575 b3059339-0415-0410-9bf9-f77b7e298cf2
cache2: print an error when streams behave in a way that the cache cannot handle
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34576 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Make cache process detect when the main process disappeared and
make it exit on its own in that case.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34371 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
'q' is just a deprecated synonym of 'll' that should no longer be used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34224 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: diego
Mark two warnings that usually only indicate a performance issue as such.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33955 b3059339-0415-0410-9bf9-f77b7e298cf2
Another attempt to make message easier to understand.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33956 b3059339-0415-0410-9bf9-f77b7e298cf2
Author: reimar
Teletext requires special OSD support. Because I can't even test
teletext, I can't restore support for it. Since teletext can be
considered ancient and obscure, and since it doesn't make sense to keep
the remaining teletext code without being able to use it, I'm removing
it.
While this was an interesting idea, it wasn't actually useful.
Basically it dumped the raw data (as requested by the demuxer) into a
file. The result is only useful if the file format was raw or maybe
some MPEG packet stream, but not with most modern file formats.
stream_cue, which provided the cue:// protocol handler, was extremely
hacky and didn't even manage to play some samples I tried.
Remove it, because it's plain unneeded. There is much better support
for .cue files elsewhere:
- libcdio can play pairs of .cue/.bin files:
mplayer cdda:// --cdrom-device=your_cue_file.cue
Note that if the .cue file is not accompanied by a .cue file, but
an encoded file for example, this most likely won't work.
- mplayer can play .cue files directly:
mplayer your_cue_file.cue
This works, even if the .cue file comes with encoded files that are
not .bin . Note that if you play .bin files, mplayer will assume a
specific raw audio format. If the format doesn't match, mplayer will
play noise and destroy your speakers. Note that format mismatches are
extremely common, because the endianness seems to be essentially
random. (libcdio uses a clever algorithm to detect the endian, and
doesn't have this problem.)
There are still various other RTSP implementations available, such as
libnemesi, live555, and libav. The mplayer native version was a huge
chunk of old unmaintained code.
Most of these demuxers and decoders are provided in better form by
libav, while the mplayer builtin ones are essentially unmaintained. The
only legimitate use case for not using the libav ones was working around
libav bugs or bugs related to the way mplayer uses libav. Instead of
trying to keep dead code alive, development effort should go into
improving libav or the mplayer libav glue code.
Note that the libav demuxer have been preferred over the mplayer builtin
ones for a while in mplayer2. There were some exceptions: playing DVDs
with dvdnav or playing network sources. (That's because some stream
modules and network.c requested explicit file formats, such as
DEMUXER_TYPE_MPEG_PS, which mapped to builtin demuxers.) With this
commit, they are switched to use libav. One caveat is that the requested
format is not passed to libavformat, instead we rely on the auto probing
to select the correct libav demuxer (see code in demux_open_stream()).
mplayer had three ways of enabling CPU specific assembler routines:
a) Enable them at compile time; crash if the CPU can't handle it.
b) Enable them at compile time, but let the configure script detect
your CPU. Your binary will only crash if you try to run it on a
different system that has less features than yours.
This was the default, I think.
c) Runtime detection.
The implementation of b) and c) suck. a) is not really feasible (it
sucks for users). Remove all code related to this, and use libav's CPU
detection instead. Now the configure script will always enable CPU
specific features, and disable them at runtime if libav reports them
not as available.
One implication is that now the compiler is always expected to handle
SSE (etc.) inline assembly at runtime, unless it's explicitly disabled.
Only checks for x86 CPU specific features are kept, the rest is either
unused or barely used.
Get rid of all the dump -mpcu, -march etc. flags. Trust the compiler
to select decent settings.
Get rid of support for the following operating systems:
- BSD/OS (some ancient BSD fork)
- QNX (don't care)
- BeOS (dead, Haiku support is still welcome)
- AIX (don't care)
- HP-UX (don't care)
- OS/2 (dead, actual support has been removed a while ago)
Remove the configure code for detecting the endianness. Instead, use
the standard header <endian.h>, which can be used if _GNU_SOURCE or
_BSD_SOURCE is defined. (Maybe these changes should have been in a
separate commit.)
Since this is a quite violent code removal orgy, and I'm testing only
on x86 32 bit Linux, expect regressions.
This enables playing URLs from libquvi supported streaming sites
directly, e.g. "mplayer http://www.youtube.com/watch?v=...."
Anything opened with mplayer is checked with libquvi. If it looks like
a URL of a supported streaming site, libquvi is used to extract the
media URL, which is then passed to the lower level mplayer code
instead of the HTML URL. Hopefully the libquvi URL checker works well
enough that it doesn't cause any problems with normal URLs, files, or
whatever else mplayer's stream layer accepts.
Add the --libquvi-format option. the option value is directly passed to
libquvi as requested format. The only values that seem to work for any
streaming site seem to be "best" (best quality) and "default" (lowest
quality). The mplayer option defaults to "best" (overriding libquvi's
default).
Outstanding issues:
- Does libquvi checking every opened file really not cause problems?
Should there be a runtime option to disable libquvi use?
(Probably not an issue.)
- Should we check/set the supported protocol? By default libquvi has
support for all protocols enabled. In the worst case, it might return
an URL using a protocol not supported by mplayer, even though it
could extract URLs with other protocols too.
(Probably not an issue.)
- Somehow export metadata (like media title) to the mplayer frontend?
Conflicts:
.gitignore
bstr.c
cfg-mplayer.h
defaultopts.c
libvo/video_out.c
The conflict in bstr.c is due to uau adding a bstr_getline function in
commit 2ba8b91a97. This function already existed in this branch.
While uau's function is obviously derived from mine, it's incompatible.
His function preserves line breaks, while mine strips them. Add a
bstr_strip_linebreaks function, fix all other uses of bstr_getline, and
pick uau's implementation.
In .gitignore, change vo_gl3_shaders.h to use an absolute path
additional to resolving the merge conflict.
There was some confusion about the "flags" field in demuxer packets.
Demuxers set it to either 1 or 0x10 to indicate a keyframe (and the
field was not used to indicate anything else). This didn't cause
visible problems because nothing read the value. Replace the "flags"
field with a boolean "keyframe" field. Set AV_PKT_FLAG_KEY based on
this field in packets fed to libavcodec video decoders (looks like PNG
and ZeroCodec are the only ones which depend on values from demuxer;
previously this was hardcoded to true for PNG).
Make demux_mf set the keyframe field in every packet. This matters for
PNG files now that the demuxer flag is forwarded to libavcodec.
Fix logic setting the field in demux_mkv. It had probably not been
updated when adding SimpleBlock support. This probably makes no
difference for any current practical use.
Conflicts:
bstr.c
bstr.h
libvo/cocoa_common.m
libvo/gl_common.c
libvo/video_out.c
mplayer.c
screenshot.c
sub/subassconvert.c
Merge of cocoa_common.m done by pigoz.
Picking my version of screenshot.c. The fix in commit aadf1002f8 will
be redone in a follow-up commit, as the original commit causes too many
conflicts with the work done locally in this branch, and other work in
progress.
The per-CD info will be printed on playback start, per-track info when
a track is played. (This is not a technical restriction, and just goes
along with the existing code.)
The following fields are not included in output, because these are
supposedly binary: CDTEXT_DISCID, CDTEXT_GENRE, CDTEXT_SIZE_INFO,
CDTEXT_TOC_INFO, CDTEXT_TOC_INFO2.
Fix cdda speed default value, range and use more robust condition.
Based on patch by Ingo Brückl [ib wupperonline de].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34458 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call paranoia_overlapset with 0, it actually causes cdparanoia to just hang.
Instead use it to set/unset PARANOIA_MODE_OVERLAP.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34459 b3059339-0415-0410-9bf9-f77b7e298cf2
Fail if trying to seek beyond the last chapter, not just if it is beyond the end of the disc.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34460 b3059339-0415-0410-9bf9-f77b7e298cf2
cdda: set position to an actual EOF position when we set EOF.
This avoids some inconsistency like the stream indicating EOF but
a read still returning more data.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34462 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow PARANOIA_MODE_FULL with skipping.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34467 b3059339-0415-0410-9bf9-f77b7e298cf2
Don't call paranoia_modeset() for PARANOIA_MODE_DISABLE.
cdparanoia destroys start sector information after such a call.
Since it is pointless without setting a mode anyway, don't do it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34468 b3059339-0415-0410-9bf9-f77b7e298cf2
Add comment to a condition that is just a hack around a cdparanoia bug.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34472 b3059339-0415-0410-9bf9-f77b7e298cf2
Add checks for errors in stream_cdda's get_track_by_sector().
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34495 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix seeking beyond EOF in stream_cdda to work with cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34577 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
command.c
libao2/ao_alsa.c
libao2/ao_dsound.c
libao2/ao_pulse.c
libao2/audio_out.h
mixer.c
mixer.h
mplayer.c
Replace my mixer changes with uau's implementation, which is based on
my code.
Commit 30afc64532 ("stream_ffmpeg: switch to libavformat avio
API") somehow contained a nonsense line which broke the control()
function. Fix. Also add avformat_network_init() to central libav
initialization code to avoid warnings.
struct station_elem_s had a field "name[8]", but the rest of the code
used PVR_STATION_NAME_SIZE as field size in snprintf and some other
calls accessing the field. Change the field size to
PVR_STATION_NAME_SIZE so it matches the accesses.
The per-CD info will be printed on playback start, per-track info when
a track is played. (This is not a technical restriction, and just goes
along with the existing code.)
The following fields are not included in output, because these are
supposedly binary: CDTEXT_DISCID, CDTEXT_GENRE, CDTEXT_SIZE_INFO,
CDTEXT_TOC_INFO, CDTEXT_TOC_INFO2.
Fix cdda speed default value, range and use more robust condition.
Based on patch by Ingo Brückl [ib wupperonline de].
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34458 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not call paranoia_overlapset with 0, it actually causes cdparanoia to just hang.
Instead use it to set/unset PARANOIA_MODE_OVERLAP.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34459 b3059339-0415-0410-9bf9-f77b7e298cf2
Fail if trying to seek beyond the last chapter, not just if it is beyond the end of the disc.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34460 b3059339-0415-0410-9bf9-f77b7e298cf2
cdda: set position to an actual EOF position when we set EOF.
This avoids some inconsistency like the stream indicating EOF but
a read still returning more data.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34462 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow PARANOIA_MODE_FULL with skipping.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34467 b3059339-0415-0410-9bf9-f77b7e298cf2
Don't call paranoia_modeset() for PARANOIA_MODE_DISABLE.
cdparanoia destroys start sector information after such a call.
Since it is pointless without setting a mode anyway, don't do it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34468 b3059339-0415-0410-9bf9-f77b7e298cf2
Add comment to a condition that is just a hack around a cdparanoia bug.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34472 b3059339-0415-0410-9bf9-f77b7e298cf2
Add checks for errors in stream_cdda's get_track_by_sector().
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34495 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix seeking beyond EOF in stream_cdda to work with cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34577 b3059339-0415-0410-9bf9-f77b7e298cf2
Windows uses a legacy codepage for char* / runtime functions accepting
char *. Using UTF-8 as the codepage with setlocale() is explicitly
forbidden.
Work this around by overriding the MSVCRT functions with wrapper
macros, that assume UTF-8 and use "proper" API calls like _wopen etc.
to deal with unicode filenames. All code that uses standard functions
that take or return filenames must now include osdep/io.h. stat()
can't be overridden, because MinGW-w64 itself defines "stat" as a
macro. Change code to use use mp_stat() instead.
This is not perfectly clean, but still somewhat sane, and much better
than littering the rest of the mplayer code with MinGW specific hacks.
It's also a bit fragile, but that's actually little different from the
previous situation. Also, MinGW is unlikely to ever include a nice way
of dealing with this.
Some of the code, especially the dshow and windows codec loader parts,
are extremely hacky and likely full of bugs. The goal is merely getting
rid of warnings that could obscure more important warnings and actual
bugs, instead of fixing actual problems. This reduces the number of
warnings from over 500 to almost the same as when compiling on Linux.
Note that many problems stem from using the ancient wine-derived
windows headers. There are some differences to the "proper" windows
header. Changing the code to compile with the proper headers would be
too much trouble, and it still has to work on Unix.
Some of the changes might actually break compilation on legacy MinGW,
but we don't support that anymore. Always use MinGW-w64, even when
compiling to 32 bit.
Fixes some warnings in the win32 loader code on Linux too.
Remove the private bswap and intreadwrite.h implementations and use
libavutil headers instead.
Originally these headers weren't publicly installed by libavutil at
all. That already changed in 2010, but the pure C bswap version in
installed headers was very inefficient. That was recently (2011-12)
improved and now using the public bswap version probably shouldn't
cause noticeable performance problems, at least if using a new enough
compiler.
Change various code to use the latest Libav API. The libavcodec
error_recognition setting has been removed and replaced with different
semantics. I removed the "--lavdopts=er=<value>" option accordingly,
as I don't think it's widely enough used to be worth attempting to
emulate the old option semantics using the new API. A new option with
the new semantics can be added later if needed.
Libav dropped APIs that were necessary with all Libav versions
until quite recently (like setting avctx->age), and it would thus not
be possible to keep compatibility with previous Libav versions without
adding workarounds. The new APIs also had some bugs/limitations in the
recent Libav release 0.8, and it would not work fully (at least some
avcodec options would not be set correctly). Because of those issues,
this commit makes no attempt to maintain compatibility with anything
but the latest Libav git head. Hopefully the required fixes and
improvements will be included in a following Libav point release.
stream_ffmpeg was using the libavformat URLContext API. This API has
been deprecated (for public use at least) in libavformat. Switch to
the AVIOContext API.
Require versions of the Libav libraries corresponding to Libav release
0.7. These are:
libavutil 51.7.0
libavcodec 53.5.0
libavformat 53.2.0
libswscale 2.0.0
libpostproc 52.0.0
Also disable the fallback to simple header check if these libraries
could not be found with pkg-config; now compiling without pkg-config
support for these always requires explicitly setting --enable-libav
and any needed compiler/linker flags. The simple check would have let
compilation proceed even if a version mismatch was detected.