Without --force-window, this is called on every iteration or so, and
calling uninit_video_out() sends the video-reconfig event. Avoid sending
redundant events.
Fixes#1225 (using an alternative patch).
This could produce an extra frame, because reaching the maximum merely
signals the playloop to exit, without strictly enforcing the limit.
Fixes#1181.
CC: @mpv-player/stable
Manually setting can break things forever, because it puts the VO cursor
state out of sync with the remembered state by handle_cursor_autohide().
Use the normal autohide code during idle mode too instead. (Originally
the idea was to make the cursor always visible in idle mode, but not so
important.)
Regression since e1e8b07c. Fixes#1166.
CC: @mpv-player/stable
This was added with commit 3cbd79b3, but it turns out this
unintentionally enables "real" pausing when seeking while buffering. It
was done for ensuring correct state of the "cache-buffering-state"
property, but it also turns out that this was unneeded (another variable
that is reset when seeking happens to take care of this).
Run opening the stream and opening the demuxer in a separate thread.
This should remove the last code paths in which the player can normally
get blocked on network.
When the stream is opened, the player will still react to input and so
on. Commands to abort opening can also be handled properly, instead of
using some of the old hacks in input.c. The only thing the user can
really do is aborting loading by navigating the playlist or quitting.
Whether playback abort works depends on the stream implementation; with
normal network, this will depend on what libavformat (via "interrupt"
callback) does.
Some pain is caused by DVD/BD/DVB. These want to reload the demuxer
sometimes. DVB wants it in order to discard old, inactive streams.
DVD/BD for the same reason, and also for reloading stream languages
and similar metadata. This means the stream and the demuxer have to
be loaded separately.
One minor detail is that we now need to copy all global options. This
wasn't really needed before, because the options were accessed on
opening only, but since opening is now on a separate thread, this
obviously becomes a necessity.
When the VO was moved it its own thread, responsibility for redrawing
was given to the VO thread itself. So if there was a condition that
indicated that redrawing was required, like expose events or certain
VOCTRLs, the VO thread was redrawing itself.
This worked fine, but there are some corner cases where this works
rather badly. E.g. if I fullscreen the player and hit panscan controls
with mpv's default autorepeat rate, playback stops. This happens because
the VO redraws itself after every panscan change command. Running each
(repeated) command takes so long due to redrawing and (involuntary)
waiting on vsync, that it never leaves the input processing loop while
the key is held down. I suspect that in my case, redrawing in fullscreen
mode just gets slow enough that it takes 2 vsyncs instead of 1 on
average, and the processing time gets larger than the autorepeat delay.
Fix this by taking redraw control from the VO, and instead let the
playloop issue a "real" redraw command to the VO if needed. This
basically reverts redraw handling to what it was before moving the VO to
a thread.
CC: @mpv-player/stable
Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The
main use of this was that you could pass a bitmask of these flags to
uninit_player(). Except in some situations where you wanted to
uninitialize nearly everything, this wasn't really useful. Moreover, it
was quite annoying that subsystems had most of the code in a specific
file, but the uninit code in loadfile.c (because that's where
uninit_player() was implemented).
Simplify all this. Remove the flags; e.g. instead of testing for the
INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code
to separate functions, e.g. uninit_audio_out().
There's no need to update OSD messages and the terminal status if nobody
is going to see it. Since the player doesn't block on video display
anymore, this update happens to often and probably burns slightly more
CPU than necessary. (OSD redrawing is handled separately, so it's just
mostly useless text processing and such.)
Change it so that it's updated only on every video frame or all 50ms
(whatever comes first).
For VO OSD, we could in theory try to lock to the OSD redraw heuristic
or the display refresh rate, but that's more complicated and doesn't
work for the terminal status.
When using --force-window (and no video or cover art), this heuristic
prevents any redrawing during seeking. It should be applied only if
there is any form of video.
E.g. --loop-file=2 will play the file 3 times (one time normally, and 2
repeats).
Minor syntax issue: "--loop-file 5" won't work, you have to use
"--loop-file=5". This is because "--loop-file" still has to work for
compatibility, so the "old" syntax with a space between option name and
value can't work.
Idle mode went to sleep too early, e.g. just pressing "ESC" did nothing,
until the next event happened. This was because it directly went to
sleep after processing commands. What we should do instead is rechecking
all state after processing commands, redraw OSD, and then go to sleep.
This also fixes some strange OSD-related behavior.
Also move some other code around to separate idle mode initialization
from the normal run loop.
Do terminal input with a thread, instead of using the central select()
loop. This also changes some details how SIGTERM is handled.
Part of my crusade against mp_input_add_fd().
Continues commit 348dfd93. Replace other places where input was manually
fetched with common code.
demux_was_interrupted() was a weird function; I'm not entirely sure
about its original purpose, but now we can just replace it with simpler
code as well. One difference is that we always look at the command
queue, rather than just when cache initialization failed. Also, instead
of discarding all but quit/playlist commands (aka abort command), run
all commands. This could possibly lead to unwanted side-effects, like
just ignoring commands that have no effect (consider pressing 'f' for
fullscreen right on start: since the window is not created yet, it would
get discarded). But playlist navigation still works as intended, and
some if not all these problems already existed before that in some
forms, so it should be ok.
Expose the central event handling functions explicitly, so that other
parts of the player can use them.
No functional changes. Preparation for the next commit.
The player didn't quit when seeking past EOF in audio-only mode while
paused. The only case when we don't want to quit is when the last video
frame is displayed while paused.
This logic was probably broken a while ago, but I'm not exactly sure.
CC: @mpv-player/stable
Add a mechanism to the client API code, which allows the player core to
query whether a client API event is needed at all. Use it for the cache
update.
In this case, this is probably a pure microoptimization; but the
mechanism will be useful for other things too.
Remove the hardcoded wait time of 2 seconds. Instead, adjust the wait
time each time we unpause: if downloading the data took longer than its
estimated playback time, increase the amount of data we wait for. If
it's shorter, decrease it.
The +/- is supposed to avoid oscillating between two values if the
elapsed time and the wait time are similar. It's not sure if this
actually helps with anything, but it can't harm.
Use the "native" underrun detection, instead of guessing by a low cache
duration. The new underrun detection (which was added with the original
commit) might have the problem that it's easy for the playloop to miss
the underrun event. The underrun is actually not stored as state, so if
the demuxer thread adds a new packet before the playloop happens to see
the state, it's as if it never happened. On the other hand, this means
that network was fast enough, so it should be just fine.
Also, should it happen that we don't know the cached range (the
ts_duration < 0 case), just wait until the demuxer goes idle (i.e.
read_packet() decides to stop). This pretty much should affect broken or
unusual files only, and there might be various things that could go
wrong. But it's more robust in the normal case: this situation also
happens when no packets have been read yet, and we don't want to
consider this as reason to resume playback.
The cache percentage was useless. It showed how much of the total stream
cache was in use, but since the cache size is something huge and
unrelated to the bitrate or network speed, the information content of
the percentage was rather low.
Replace this with printing the duration of the demuxer-cached data, and
the size of the stream cache in KB.
I'm not completely sure about the formatting; suggestions are welcome.
Note that it's not easy to know how much playback time the stream cache
covers, so it's always in bytes.
The "buffering" logic was active even if the stream cache was disabled.
This is contrary to what the manpage says. It also breaks playback
because of another bug: the demuxer cache is smaller than 2 seconds,
and thus the resume condition never becomes true.
Explicitly run this code only if the stream cache is enabled. Also, fix
the underlying problem of the breakage, and resume when the demuxer
thread stops reading in any case, not just on EOF.
Broken by previous commit. Unbreaks playback of local files.
Add the --cache-secs option, which literally overrides the value of
--demuxer-readahead-secs if the stream cache is active. The default
value is very high (10 seconds), which means it can act as network
cache.
Remove the old behavior of trying to pause once the byte cache runs
low. Instead, do something similar wit the demuxer cache. The nice
thing is that we can guess how many seconds of video it has cached,
and we can make better decisions. But for now, apply a relatively
naive heuristic: if the cache is below 0.5 secs, pause, and wait
until at least 2 secs are available.
Note that due to timestamp reordering, the estimated cached duration
of video might be inaccurate, depending on the file format. If the
file format has DTS, it's easy, otherwise the duration will seemingly
jump back and forth.
When video format changes, the frame before the frame with the new
format sets video_status briefly to STATUS_DRAINING. This caused the
code to handle the EOF case to kick in, which just pauses the player
when trying to step past the last frame. As a result, trying to
framestep over format changes resulted in pausing the player.
Fix by testing against the correct status.
In theory, timestamps can be negative, so we shouldn't just return -1
as special value.
Remove the separate code for clearing decode buffers; use the same code
that is used for normal seek reset.
If video reaches EOF, and audio is also EOF (or is otherwise not
meaningful, like audio disabled), then the playback position was briefly
set to 0. Fix this by not trying to use a bogus audio PTS.
CC: @mpv-player/stable (maybe)
After a new file is loaded, playback never starts instantly. Rather, it
takes some playloop iterations until initial audio and video have been
decoded, and the outputs have been (lazily) initialized. This means you
will get status line updates between the messages that inform of the
initialized outputs. This is a bit annoying and clutters the terminal
output needlessly.
Fix this by never printing the status line before playback isn't fully
initialized. Do this by reusing the --term-playing-msg code (which
prints a message once playback is initialized). This also makes sure the
status line _is_ shown during playback restart when doing seeks.
It's possible that the change will make the output more confusing if for
some reason is stuck forever initializing playback, but that seems like
an obscure corner case that never happens, so forget about it.
print_status() is called at a later point anyway (and before sleeping),
so this code has little effect. This code was added in commit a4f7a3df5,
and I can't observe any problems with idle mode anymore.
Now print_status() is called from a single place only, within osd.c.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
Apparently users prefer this behavior.
It was used for subtitles too, so move the code to calculate the video
offset into a separate function. Seeking also needs to be fixed.
Fixes#1018.
The previous commit broke these things, and fixing them is separate in
this commit in order to reduce the volume of changes.
Move the image queue from the VO to the playback core. The image queue
is a remnant of the old way how vdpau was implemented, and increasingly
became more and more an artifact. In the end, it did only one thing:
computing the duration of the current frame. This was done by taking the
PTS difference between the current and the future frame. We keep this,
but by moving it out of the VO, we don't have to special-case format
changes anymore. This simplifies the code a lot.
Since we need the queue to compute the duration only, a queue size
larger than 2 makes no sense, and we can hardcode that.
Also change how the last frame is handled. The last frame is a bit of a
problem, because video timing works by showing one frame after another,
which makes it a special case. Make the VO provide a function to notify
us when the frame is done, instead. The frame duration is used for that.
This is not perfect. For example, changing playback speed during the
last frame doesn't update the end time. Pausing will not stop the clock
that times the last frame. But I don't think this matters for such a
corner case.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
wm4
Ben Boeckel