wl_display_dispatch is dangerous because it will block forever if the
event queue is empty. Any direct calls to this function should just be
replaced with wl_display_dispatch_pending which accomplishes the same
thing for mpv's purposes without any chance of blocking.
The other potential trap is wl_display_roundtrip. It can internally call
wl_display_dispatch which in certain circumstances could potentially
block. There are cases where we need the server to finish processing
client requests before doing anything else so this can not be cleanly
avoided. The dangerous call is the usage of wl_display_roundtrip in
vo_wayland_wait_frame. In the majority of cases, this shouldn't be a
problem because the previous wl_display_read_events should always queue
up some events on the fd for wl_display_roundtrip to send. However, the
compositor could potentially send us an error in the display queue that
could lead to bad behavior when wl_display_roundtrip is called.
The wl_display_roundtrip can't be removed because we are relying on its
semi-blocking capabilities, but the logic can be slightly adjusted to be
safer. The obvious thing to do is to make sure we check the pollfd for
any errors. If one is returned, then we call wl_display_cancel_read and
try again. The less obvious trick is to call wl_display_dispatch_pending
and move wl_display_roundtrip outside of the blocking + timeout loop.
This change has some subtle but important differences. Previously,
vo_wayland_wait_frame would read an event and wait on the server to
process it one-by-one. With this change, the events are dispatched as
soon as possible to the server and then we wait on all of those
(potentially multiple) events to be processed after we have either
received frame callback or the loop times out.
After that is done, we can then check for if there are any errors on the
display. If it's all clear, we can run wl_display_roundtrip without any
worries. If some error happens, then don't execute the function at all.
the problem here is that with time, and because the macOS VMs don't get
updated, the homebrew update is getting longer since more and more
changes have to be pulled. to prevent that, we cache the homebrew
installation folder after the update. that way we don't have to update
several months worth of updates every build. for the legacy build we
have to check put master again to actually cache the newest homebrew
version.
additionally to that, we also do the same as on the legacy build, with
the addition of not removing all installed formulas but only the ones
we don't need. so we don't need to reinstall those.
just remove all pre installed formulas, since we don't need the majority
of it. after that install what we need. this also fixes the brew update
of those formulas where the source links were broken like popt.
this also helps when the build times out due to building some formulas
from source that are not dependencies we need.
Previously, the compositor was signaled that a drag-and-drop ended with
wl_data_offer_finish in check_dnd_fd. This is, however, erroneous
because it is outside of the data_device_listener and in some cases
caused errors with certain compositors. check_dnd_fd itself does not
need to know or care about anything that happens in wayland. It just
needs to read data from an fd. The simple fix is to just always signal
the end of a drag-and-drop in data_device_handle_drop. check_dnd_fd can
free memory and close the fd later, but it should not talk to the
compositor. Fixes#7954.
The read of the wayland display fd in vo_wayland_wait_events was
incorrect and technically vulnerable to race conditions. The correct
usage as per the client api is to use wl_display_prepare_read as well as
wl_display_read_events.
scaletempo2 is a new audio filter for playing back
audio at modified speed and is based on chromium
commit 51ed77e3f37a9a9b80d6d0a8259e84a8ca635259.
It sounds subjectively better than the existing
implementions scaletempo and rubberband.
This fixes the "run" and "subprocess" commands on Windows, including
youtube-dl support.
Unix-like FD inheritance is emulated on Windows by using an undocumented
data structure[1] that gets passed to the newly created process in
STARTUPINFO.lpReserved2. It consists of two sparse arrays listing the
HANDLE and internal CRT flags corresponding to each FD. This structure
is used and understood primarily by MSVCRT, but there are other runtimes
and frameworks that can write it, like libuv.
The code for creating asynchronous "anonymous" pipes in Windows has been
enhanced and moved into windows_utils.c. This is mainly an artifact of
an unfinished future change to support anonymous IPC clients in Windows.
Right now, it's still only used in subprocess-win.c
[1]: https://www.catch22.net/tuts/undocumented-createprocess
Sharing a process sure is hard in POSIX.
The rationale is that you'd have to handle EINTR on every single
blocking syscall. stream_file.c does not seem to handle it on read()
calls.
It appears that on most modern systems, this can happen only if you call
sigaction(), and incompetently forget to add SA_RESTART. signal()
usually adds it.
Add env and detach arguments. This means the command.c code must use the
"new" mp_subprocess2(). So also take this as an opportunity to clean up.
win32 support gets broken by it, because it never made the switch to the
newer function.
The new detach parameter makes the "run" command fully redundant, but I
guess we'll keep it for simplicity. But change its implementation to use
mp_subprocess2() (couldn't do this earlier, because win32).
Privately, I'm going to use the "env" argument to add a key binding that
starts a shell with a FILE environment variable set to the currently
playing file, so this is very useful to me.
Note: breaks windows, so for example youtube-dl on windows will not work
anymore. mp_subprocess2() has to be implemented. The old functions are
gone, and subprocess-win.c is not built anymore. It will probably work
on Cygwin.
Rather than after tone-mapping. This prevents overflow when the
pre-tonemapped signal contains inputs exceeding sig_peak. I also
realized that with this clipping in place, post-clipping no longer needs
to be done, so this isn't even particularly slower.
The only two exceptions to the rule are "clip" and "linear", which
relied on the post-clipping to do their tone mapping properly.
Fixes#7929
This normally gets printed by libplacebo itself when initializing the
context, but due to the way our code is structured (for convenience) we
don't have the log hook enabled by the time this function call is
relevant. So instead just print it manually as an easier work-around
than restructuring the code.
This probably makes it much faster (I wouldn't know, I didn't run any
benchmarks ). Seems to work as well (although I'm not sure, it's not
like I'd perform rigorous tests).
The scale_zimg test seems to mysteriously treat color in fully
transparent alpha differently, which makes no sense, and isn't visible
(but makes the test fail). I can't be bothered with investigating this
more. What do you do with failing tests? Correct, you disable them. Or
rather, you disable whatever appears to cause them to fail, which is the
threading in this case.
This change follows mostly the tile_example.cpp. The slice size uses a
minimum of 64, which was suggested by the zimg author. Some of this
commit is a bit inelegant and weird, such as recomputing the scale
factor for every slice, or the way slice_h is managed. Too lazy to make
this more elegant.
zimg git had a regressio around active_region (which is needed by the
slicing), which was fixed in commit 83071706b2e6bc634. Apparently, the
bug was never released, so just add a warning to the manpage.
The intention is to add slice-threading to the wrapper. For that
purpose, move all zimg related state to a new struct mp_zimg_state.
There is now an array of instances of this struct. The intention is to
have one instance for each thread. As of this commit, this is hardcoded
to 1 thread; the following commit extends this.
libass recently switched the default from 1 to 0 for compatibility
with ASS scripts that rely on the historical/VSFilter default of 0.
libass does attempt to detect and avoid breaking scripts that rely
on the historic libass-only default of 1, but it doesn't cover tracks
created directly through the API, so set the header explicitly.
Fixes https://github.com/mpv-player/mpv/issues/7900.
It turns out that the AMD driver doesn't bother to set the size
field in the descriptor for an exported VA surface. I guess they
assume the caller can always use lseek() and don't bother. So, we
need to use lseek() in these situations.
Modified-by: Niklas Haas <git@haasn.xyz>
Guarded this behind PL_API_VER >= 88 to prevent it from exploding on
older libplacebo versions, where vaapi support does not yet work
properly on AMD due to lack of DRM modifiers.
When get_state() corks the stream after an underrun happens
priv->playing is incorrectly reset to true, which can cause the
player to miss the underrun entirely. Stop resetting priv->playing
during corking (but not uncorking) to fix this.
The underflow callback introduced in d27ad96 can be called
when the buffer is still full, causing playback to never
resume afterwards since get_state() reports free_samples == 0.
Fix this by fully resetting on underrun, which flushes
the stream and ensures free buffer space.
fixes#7874
we properly set the unfs window size on live resize end. due to a race
condition in the fullscreen events, which is also a live resize, the
unfs window size is incorrectly set to a fullscreen size. this happens
when the end fs screen event triggers before the end of live resize one.
this just adds a second condition to not be un fullscreen when updating
the unfs window size.
Mess this into the --geometry option, because I like to be
irresponsible. I considered adding a separate option, but at least this
allows me to defer the question how the hell this should work as
property (geometry simply and inherently does not).
Tested on IceWM only. Option equality test and string output not tested.
Probably did not cause any practical problems, but it sure seems
unclean. sws_utils users might also rely on these fields being exactly
the same as the actual input/output. It's better to avoid this.
I'm tired of dealing with this frequent spawning of xdg-screensaver when
debugging and what not. xdg-screensaver was never a serious tool anyway,
it's more like some self-deprecating joke by FDO folks.
This will affect X11 on GNOME and other DEs. I'm singling out GNOME
though, because they are the ones actively sabotaging any sane
technical solutions and community cooperation.
I have been accused of taking it out on innocent GNOME users, while none
of this will reach GNOME developers. Of course that is not the
intention.
This can be used to make vo_libmpv render video to a memory buffer. It
only adds a new backend API that takes memory surfaces. All the render
API (such as frame rendering control and so on) is reused.
I'm not quite convinced of the usefulness of this, and until now I
always resisted providing something like this. It only seems to
facilitate inefficient implementation. But whatever.
Unfortunately, this duplicates the software rendering glue code yet
again (like it exists in vo_x11, vo_wlshm, vo_drm, and probably more).
But in theory, these could reuse this backend in the future, just like
vo_gpu could reuse the render_gl API.
Fixes: #7852
libplacebo exposes this feature already, because this particular type of
bug is unusually common in practice. Simply make use of it, by exposing
it as an option.
Could probably also bump the libplacebo minimum version to get rid of
the #if, but that would break debian oldoldstable or something.
Fixes#7867.
Apparently mpv supports loading config files from the same directory as
the mpv.exe. This is a fallback of some sort. It used the old_home
mechanism.
I want to add a warning if old_home exists, but that would always show
the warning on win32. Obviously we don't want that.
Add a separate exe_dir entry to deal with that.
Untested, but probably works.
XDG is stupid, so change back to the standard behavior. Unfortunately,
most users will now have the XDG one, so we will still need to load
this. (This is exactly the same problem as when XDG support was
introduced, just the other way around).
This should not affect any normal users. Hopefully I tested this well
enough; my intention is not to torment miserable XDG fans; they can keep
using their config dir if they want it.
This changes behavior in two cases:
- new users (now creates ~/.mpv/ instead of ~/.config/mpv/)
- users which have both directories
The latter case will behave subtly or obviously different, not sure.
Just fix your shit.
Extend the manpage with all the messy details, as far as I could reverse
engineer them from the code.
De-emphasize it, since a user should usually not use it. This _could_ be
used to make the cache seekable with --cache=no, but it's better and
more intuitive to use --cache=yes. As such, the only use of this is for
debugging. I'm not quite sure if this should be removed entirely, but I
still see some value in it (for example if you want the cache lookahead,
but you're using a stream where cache seeking is somehow broken).
Using mediump float on GLES causes problems with kernel resampling,
PQ HDR, and possibly others. The issues are fixed by using highp,
which is available when GL_FRAGMENT_PRECISION_HIGH is defined.
Dudemanguy
der richter
Dorian Rudolph
wm4
Avi Halachmi (:avih)
sfan5
Jan Beich
Eva
James Ross-Gowan
Niklas Haas
Oleg Oshmyan
Philip Langdale
Stephen Salerno