mpv/video/out/vo_vdpau.c

1140 lines
40 KiB
C
Raw Normal View History

/*
* VDPAU video output driver
*
* Copyright (C) 2008 NVIDIA (Rajib Mahapatra <rmahapatra@nvidia.com>)
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
* Copyright (C) 2009 Uoti Urpala
*
* This file is part of mpv.
*
* mpv is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with mpv. If not, see <http://www.gnu.org/licenses/>.
*/
2009-05-09 15:08:30 +00:00
/*
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
* Actual decoding is done in video/decode/vdpau.c
*/
#include <stdio.h>
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
#include <limits.h>
#include <assert.h>
#include "config.h"
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
#include "video/vdpau.h"
#include "video/vdpau_mixer.h"
#include "video/hwdec.h"
#include "common/msg.h"
#include "options/options.h"
#include "mpv_talloc.h"
#include "vo.h"
#include "x11_common.h"
#include "video/csputils.h"
#include "sub/osd.h"
#include "options/m_option.h"
#include "video/mp_image.h"
#include "osdep/timer.h"
// Returns x + a, but wrapped around to the range [0, m)
// a must be within [-m, m], x within [0, m)
#define WRAP_ADD(x, a, m) ((a) < 0 \
? ((x)+(a)+(m) < (m) ? (x)+(a)+(m) : (x)+(a)) \
: ((x)+(a) < (m) ? (x)+(a) : (x)+(a)-(m)))
/* number of video and output surfaces */
#define MAX_OUTPUT_SURFACES 15
2011-10-06 18:46:01 +00:00
/* Pixelformat used for output surfaces */
#define OUTPUT_RGBA_FORMAT VDP_RGBA_FORMAT_B8G8R8A8
/*
* Global variable declaration - VDPAU specific
*/
struct vdpctx {
struct mp_vdpau_ctx *mpvdp;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
struct vdp_functions *vdp;
VdpDevice vdp_device;
uint64_t preemption_counter;
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
struct m_color colorkey;
VdpPresentationQueueTarget flip_target;
VdpPresentationQueue flip_queue;
VdpOutputSurface output_surfaces[MAX_OUTPUT_SURFACES];
int num_output_surfaces;
VdpOutputSurface black_pixel;
VdpOutputSurface rotation_surface;
struct mp_image *current_image;
int64_t current_pts;
int current_duration;
int output_surface_w, output_surface_h;
int rotation;
int force_yuv;
struct mp_vdpau_mixer *video_mixer;
int deint;
int pullup;
float denoise;
float sharpen;
int hqscaling;
int chroma_deint;
int flip_offset_window;
int flip_offset_fs;
int64_t flip_offset_us;
VdpRect src_rect_vid;
VdpRect out_rect_vid;
struct mp_osd_res osd_rect;
VdpBool supports_a8;
int surface_num; // indexes output_surfaces
int query_surface_num;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
VdpTime recent_vsync_time;
float user_fps;
int composite_detect;
int vsync_interval;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
uint64_t last_queue_time;
uint64_t queue_time[MAX_OUTPUT_SURFACES];
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
uint64_t last_ideal_time;
bool dropped_frame;
uint64_t dropped_time;
uint32_t vid_width, vid_height;
uint32_t image_format;
VdpYCbCrFormat vdp_pixel_format;
bool rgb_mode;
// OSD
struct osd_bitmap_surface {
VdpRGBAFormat format;
VdpBitmapSurface surface;
uint32_t surface_w, surface_h;
// List of surfaces to be rendered
struct osd_target {
VdpRect source;
VdpRect dest;
VdpColor color;
} *targets;
int targets_size;
int render_count;
int change_id;
} osd_surfaces[MAX_OSD_PARTS];
};
static bool status_ok(struct vo *vo);
static int video_to_output_surface(struct vo *vo, struct mp_image *mpi)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpTime dummy;
VdpStatus vdp_st;
VdpOutputSurface output_surface = vc->output_surfaces[vc->surface_num];
VdpRect *output_rect = &vc->out_rect_vid;
VdpRect *video_rect = &vc->src_rect_vid;
vdp_st = vdp->presentation_queue_block_until_surface_idle(vc->flip_queue,
output_surface,
&dummy);
CHECK_VDP_WARNING(vo, "Error when calling "
"vdp_presentation_queue_block_until_surface_idle");
// Clear the borders between video and window (if there are any).
// For some reason, video_mixer_render doesn't need it for YUV.
// Also, if there is nothing to render, at least clear the screen.
if (vc->rgb_mode || !mpi || mpi->params.rotate != 0) {
int flags = VDP_OUTPUT_SURFACE_RENDER_ROTATE_0;
vdp_st = vdp->output_surface_render_output_surface(output_surface,
NULL, vc->black_pixel,
NULL, NULL, NULL,
flags);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error clearing screen");
}
if (!mpi)
return -1;
struct mp_vdpau_mixer_frame *frame = mp_vdpau_mixed_frame_get(mpi);
struct mp_vdpau_mixer_opts opts = {0};
if (frame)
opts = frame->opts;
// Apply custom vo_vdpau suboptions.
opts.chroma_deint |= vc->chroma_deint;
opts.pullup |= vc->pullup;
opts.denoise = MPCLAMP(opts.denoise + vc->denoise, 0, 1);
opts.sharpen = MPCLAMP(opts.sharpen + vc->sharpen, -1, 1);
if (vc->hqscaling)
opts.hqscaling = vc->hqscaling;
if (mpi->params.rotate != 0) {
int flags;
VdpRect r_rect;
switch (mpi->params.rotate) {
case 90:
r_rect.y0 = output_rect->x0;
r_rect.y1 = output_rect->x1;
r_rect.x0 = output_rect->y0;
r_rect.x1 = output_rect->y1;
flags = VDP_OUTPUT_SURFACE_RENDER_ROTATE_90;
break;
case 180:
r_rect.x0 = output_rect->x0;
r_rect.x1 = output_rect->x1;
r_rect.y0 = output_rect->y0;
r_rect.y1 = output_rect->y1;
flags = VDP_OUTPUT_SURFACE_RENDER_ROTATE_180;
break;
case 270:
r_rect.y0 = output_rect->x0;
r_rect.y1 = output_rect->x1;
r_rect.x0 = output_rect->y0;
r_rect.x1 = output_rect->y1;
flags = VDP_OUTPUT_SURFACE_RENDER_ROTATE_270;
break;
default:
MP_ERR(vo, "Unsupported rotation angle: %u\n", mpi->params.rotate);
return -1;
}
mp_vdpau_mixer_render(vc->video_mixer, &opts, vc->rotation_surface,
&r_rect, mpi, video_rect);
vdp_st = vdp->output_surface_render_output_surface(output_surface,
output_rect,
vc->rotation_surface,
&r_rect,
NULL,
NULL,
flags);
CHECK_VDP_WARNING(vo, "Error rendering rotated frame");
} else {
mp_vdpau_mixer_render(vc->video_mixer, &opts, output_surface,
output_rect, mpi, video_rect);
}
return 0;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
}
static void forget_frames(struct vo *vo, bool seek_reset)
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
{
struct vdpctx *vc = vo->priv;
if (!seek_reset)
mp_image_unrefp(&vc->current_image);
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->dropped_frame = false;
}
static int s_size(int max, int s, int disp)
{
disp = MPMAX(1, disp);
return MPMIN(max, MPMAX(s, disp));
}
2009-05-04 00:09:50 +00:00
static void resize(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
struct mp_rect src_rect;
struct mp_rect dst_rect;
vo_get_src_dst_rects(vo, &src_rect, &dst_rect, &vc->osd_rect);
vc->out_rect_vid.x0 = dst_rect.x0;
vc->out_rect_vid.x1 = dst_rect.x1;
vc->out_rect_vid.y0 = dst_rect.y0;
vc->out_rect_vid.y1 = dst_rect.y1;
if (vo->params->rotate == 90 || vo->params->rotate == 270) {
vc->src_rect_vid.y0 = src_rect.x0;
vc->src_rect_vid.y1 = src_rect.x1;
vc->src_rect_vid.x0 = src_rect.y0;
vc->src_rect_vid.x1 = src_rect.y1;
} else {
vc->src_rect_vid.x0 = src_rect.x0;
vc->src_rect_vid.x1 = src_rect.x1;
vc->src_rect_vid.y0 = src_rect.y0;
vc->src_rect_vid.y1 = src_rect.y1;
}
VdpBool ok;
uint32_t max_w, max_h;
vdp_st = vdp->output_surface_query_capabilities(vc->vdp_device,
OUTPUT_RGBA_FORMAT,
&ok, &max_w, &max_h);
if (vdp_st != VDP_STATUS_OK || !ok)
return;
vc->flip_offset_us = vo->opts->fullscreen ?
1000LL * vc->flip_offset_fs :
1000LL * vc->flip_offset_window;
vo_set_queue_params(vo, vc->flip_offset_us, 1);
if (vc->output_surface_w < vo->dwidth || vc->output_surface_h < vo->dheight ||
vc->rotation != vo->params->rotate)
{
vc->output_surface_w = s_size(max_w, vc->output_surface_w, vo->dwidth);
vc->output_surface_h = s_size(max_h, vc->output_surface_h, vo->dheight);
// Creation of output_surfaces
for (int i = 0; i < vc->num_output_surfaces; i++)
if (vc->output_surfaces[i] != VDP_INVALID_HANDLE) {
vdp_st = vdp->output_surface_destroy(vc->output_surfaces[i]);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling "
"vdp_output_surface_destroy");
}
for (int i = 0; i < vc->num_output_surfaces; i++) {
2009-05-09 15:08:30 +00:00
vdp_st = vdp->output_surface_create(vc->vdp_device,
2011-10-06 18:46:01 +00:00
OUTPUT_RGBA_FORMAT,
vc->output_surface_w,
vc->output_surface_h,
2009-05-09 15:08:30 +00:00
&vc->output_surfaces[i]);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_output_surface_create");
MP_DBG(vo, "vdpau out create: %u\n",
2009-05-09 15:08:30 +00:00
vc->output_surfaces[i]);
}
if (vc->rotation_surface != VDP_INVALID_HANDLE) {
vdp_st = vdp->output_surface_destroy(vc->rotation_surface);
CHECK_VDP_WARNING(vo, "Error when calling "
"vdp_output_surface_destroy");
vc->rotation_surface = VDP_INVALID_HANDLE;
}
if (vo->params->rotate == 90 || vo->params->rotate == 270) {
vdp_st = vdp->output_surface_create(vc->vdp_device,
OUTPUT_RGBA_FORMAT,
vc->output_surface_h,
vc->output_surface_w,
&vc->rotation_surface);
} else if (vo->params->rotate == 180) {
vdp_st = vdp->output_surface_create(vc->vdp_device,
OUTPUT_RGBA_FORMAT,
vc->output_surface_w,
vc->output_surface_h,
&vc->rotation_surface);
}
CHECK_VDP_WARNING(vo, "Error when calling vdp_output_surface_create");
MP_DBG(vo, "vdpau rotation surface create: %u\n",
vc->rotation_surface);
}
vc->rotation = vo->params->rotate;
vo->want_redraw = true;
}
2009-05-04 00:09:50 +00:00
static int win_x11_init_vdpau_flip_queue(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
2009-05-04 00:09:50 +00:00
struct vo_x11_state *x11 = vo->x11;
VdpStatus vdp_st;
if (vc->flip_target == VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_target_create_x11(vc->vdp_device,
x11->window,
&vc->flip_target);
2013-12-21 17:05:23 +00:00
CHECK_VDP_ERROR(vo, "Error when calling "
"vdp_presentation_queue_target_create_x11");
}
/* Emperically this seems to be the first call which fails when we
* try to reinit after preemption while the user is still switched
* from X to a virtual terminal (creating the vdp_device initially
* succeeds, as does creating the flip_target above). This is
* probably not guaranteed behavior.
*/
if (vc->flip_queue == VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_create(vc->vdp_device, vc->flip_target,
&vc->flip_queue);
CHECK_VDP_ERROR(vo, "Error when calling vdp_presentation_queue_create");
}
if (vc->colorkey.a > 0) {
VdpColor color = {
.red = vc->colorkey.r / 255.0,
.green = vc->colorkey.g / 255.0,
.blue = vc->colorkey.b / 255.0,
.alpha = 0,
};
vdp_st = vdp->presentation_queue_set_background_color(vc->flip_queue,
&color);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error setting colorkey");
}
if (vc->composite_detect && vo_x11_screen_is_composited(vo)) {
MP_INFO(vo, "Compositing window manager detected. Assuming timing info "
"is inaccurate.\n");
vc->user_fps = -1;
}
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
return 0;
}
// Free everything specific to a certain video file
static void free_video_specific(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
forget_frames(vo, false);
if (vc->black_pixel != VDP_INVALID_HANDLE) {
vdp_st = vdp->output_surface_destroy(vc->black_pixel);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_output_surface_destroy");
}
vc->black_pixel = VDP_INVALID_HANDLE;
}
static int initialize_vdpau_objects(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
mp_vdpau_get_format(vc->image_format, NULL, &vc->vdp_pixel_format);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
vc->video_mixer->initialized = false;
if (win_x11_init_vdpau_flip_queue(vo) < 0)
return -1;
if (vc->black_pixel == VDP_INVALID_HANDLE) {
vdp_st = vdp->output_surface_create(vc->vdp_device, OUTPUT_RGBA_FORMAT,
1, 1, &vc->black_pixel);
2013-12-21 17:05:23 +00:00
CHECK_VDP_ERROR(vo, "Allocating clearing surface");
const char data[4] = {0};
vdp_st = vdp->output_surface_put_bits_native(vc->black_pixel,
(const void*[]){data},
(uint32_t[]){4}, NULL);
2013-12-21 17:05:23 +00:00
CHECK_VDP_ERROR(vo, "Initializing clearing surface");
}
forget_frames(vo, false);
resize(vo);
return 0;
}
static void mark_vdpau_objects_uninitialized(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
forget_frames(vo, false);
vc->black_pixel = VDP_INVALID_HANDLE;
vc->flip_queue = VDP_INVALID_HANDLE;
vc->flip_target = VDP_INVALID_HANDLE;
for (int i = 0; i < MAX_OUTPUT_SURFACES; i++)
vc->output_surfaces[i] = VDP_INVALID_HANDLE;
vc->rotation_surface = VDP_INVALID_HANDLE;
vc->vdp_device = VDP_INVALID_HANDLE;
for (int i = 0; i < MAX_OSD_PARTS; i++) {
struct osd_bitmap_surface *sfc = &vc->osd_surfaces[i];
sfc->change_id = 0;
*sfc = (struct osd_bitmap_surface){
.surface = VDP_INVALID_HANDLE,
};
}
vc->output_surface_w = vc->output_surface_h = -1;
}
static bool check_preemption(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
int r = mp_vdpau_handle_preemption(vc->mpvdp, &vc->preemption_counter);
if (r < 1) {
mark_vdpau_objects_uninitialized(vo);
if (r < 0)
return false;
vc->vdp_device = vc->mpvdp->vdp_device;
if (initialize_vdpau_objects(vo) < 0)
return false;
}
return true;
}
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
static bool status_ok(struct vo *vo)
{
return vo->config_ok && check_preemption(vo);
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
}
/*
* connect to X server, create and map window, initialize all
* VDPAU objects, create different surfaces etc.
*/
static int reconfig(struct vo *vo, struct mp_image_params *params)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
if (!check_preemption(vo))
return -1;
VdpChromaType chroma_type = VDP_CHROMA_TYPE_420;
mp_vdpau_get_format(params->imgfmt, &chroma_type, NULL);
VdpBool ok;
uint32_t max_w, max_h;
vdp_st = vdp->video_surface_query_capabilities(vc->vdp_device, chroma_type,
&ok, &max_w, &max_h);
CHECK_VDP_ERROR(vo, "Error when calling vdp_video_surface_query_capabilities");
if (!ok)
return -1;
if (params->w > max_w || params->h > max_h) {
if (ok)
MP_ERR(vo, "Video too large for vdpau.\n");
return -1;
}
vc->image_format = params->imgfmt;
vc->vid_width = params->w;
vc->vid_height = params->h;
2011-10-06 18:46:01 +00:00
vc->rgb_mode = mp_vdpau_get_rgb_format(params->imgfmt, NULL);
free_video_specific(vo);
vo_x11_config_vo_window(vo);
if (initialize_vdpau_objects(vo) < 0)
return -1;
return 0;
}
static void draw_osd_part(struct vo *vo, int index)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
struct osd_bitmap_surface *sfc = &vc->osd_surfaces[index];
VdpOutputSurface output_surface = vc->output_surfaces[vc->surface_num];
int i;
2009-05-09 15:08:30 +00:00
VdpOutputSurfaceRenderBlendState blend_state = {
.struct_version = VDP_OUTPUT_SURFACE_RENDER_BLEND_STATE_VERSION,
.blend_factor_source_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_SRC_ALPHA,
.blend_factor_source_alpha =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ZERO,
2009-05-09 15:08:30 +00:00
.blend_factor_destination_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA,
.blend_factor_destination_alpha =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ZERO,
2009-05-09 15:08:30 +00:00
.blend_equation_color = VDP_OUTPUT_SURFACE_RENDER_BLEND_EQUATION_ADD,
.blend_equation_alpha = VDP_OUTPUT_SURFACE_RENDER_BLEND_EQUATION_ADD,
};
VdpOutputSurfaceRenderBlendState blend_state_premultiplied = blend_state;
blend_state_premultiplied.blend_factor_source_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE;
for (i = 0; i < sfc->render_count; i++) {
VdpOutputSurfaceRenderBlendState *blend = &blend_state;
if (sfc->format == VDP_RGBA_FORMAT_B8G8R8A8)
blend = &blend_state_premultiplied;
2009-05-09 15:08:30 +00:00
vdp_st = vdp->
output_surface_render_bitmap_surface(output_surface,
&sfc->targets[i].dest,
sfc->surface,
&sfc->targets[i].source,
&sfc->targets[i].color,
blend,
2009-05-09 15:08:30 +00:00
VDP_OUTPUT_SURFACE_RENDER_ROTATE_0);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "OSD: Error when rendering");
}
}
static int next_pow2(int v)
{
for (int x = 0; x < 30; x++) {
if ((1 << x) >= v)
return 1 << x;
}
return INT_MAX;
}
static void generate_osd_part(struct vo *vo, struct sub_bitmaps *imgs)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
struct osd_bitmap_surface *sfc = &vc->osd_surfaces[imgs->render_index];
if (imgs->change_id == sfc->change_id)
return; // Nothing changed and we still have the old data
sfc->change_id = imgs->change_id;
sfc->render_count = 0;
if (imgs->format == SUBBITMAP_EMPTY || imgs->num_parts == 0)
return;
VdpRGBAFormat format;
switch (imgs->format) {
case SUBBITMAP_LIBASS:
format = VDP_RGBA_FORMAT_A8;
break;
case SUBBITMAP_RGBA:
format = VDP_RGBA_FORMAT_B8G8R8A8;
break;
default:
abort();
};
assert(imgs->packed);
int r_w = next_pow2(imgs->packed_w);
int r_h = next_pow2(imgs->packed_h);
if (sfc->format != format || sfc->surface == VDP_INVALID_HANDLE ||
sfc->surface_w < r_w || sfc->surface_h < r_h)
{
MP_VERBOSE(vo, "Allocating a %dx%d surface for OSD bitmaps.\n", r_w, r_h);
uint32_t m_w = 0, m_h = 0;
vdp_st = vdp->bitmap_surface_query_capabilities(vc->vdp_device, format,
&(VdpBool){0}, &m_w, &m_h);
CHECK_VDP_WARNING(vo, "Query to get max OSD surface size failed");
if (r_w > m_w || r_h > m_h) {
MP_ERR(vo, "OSD bitmaps do not fit on a surface with the maximum "
"supported size\n");
return;
}
if (sfc->surface != VDP_INVALID_HANDLE) {
vdp_st = vdp->bitmap_surface_destroy(sfc->surface);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_bitmap_surface_destroy");
}
VdpBitmapSurface surface;
vdp_st = vdp->bitmap_surface_create(vc->vdp_device, format,
r_w, r_h, true, &surface);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "OSD: error when creating surface");
if (vdp_st != VDP_STATUS_OK)
return;
sfc->surface = surface;
sfc->surface_w = r_w;
sfc->surface_h = r_h;
sfc->format = format;
}
void *data = imgs->packed->planes[0];
int stride = imgs->packed->stride[0];
VdpRect rc = {0, 0, imgs->packed_w, imgs->packed_h};
vdp_st = vdp->bitmap_surface_put_bits_native(sfc->surface,
&(const void *){data},
&(uint32_t){stride},
&rc);
CHECK_VDP_WARNING(vo, "OSD: putbits failed");
MP_TARRAY_GROW(vc, sfc->targets, imgs->num_parts);
sfc->render_count = imgs->num_parts;
for (int i = 0; i < imgs->num_parts; i++) {
struct sub_bitmap *b = &imgs->parts[i];
struct osd_target *target = &sfc->targets[i];
target->source = (VdpRect){b->src_x, b->src_y,
b->src_x + b->w, b->src_y + b->h};
target->dest = (VdpRect){b->x, b->y, b->x + b->dw, b->y + b->dh};
target->color = (VdpColor){1, 1, 1, 1};
if (imgs->format == SUBBITMAP_LIBASS) {
uint32_t color = b->libass.color;
target->color.alpha = 1.0 - ((color >> 0) & 0xff) / 255.0;
target->color.blue = ((color >> 8) & 0xff) / 255.0;
target->color.green = ((color >> 16) & 0xff) / 255.0;
target->color.red = ((color >> 24) & 0xff) / 255.0;
}
}
}
static void draw_osd_cb(void *ctx, struct sub_bitmaps *imgs)
{
struct vo *vo = ctx;
generate_osd_part(vo, imgs);
draw_osd_part(vo, imgs->render_index);
}
static void draw_osd(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
if (!status_ok(vo))
return;
bool formats[SUBBITMAP_COUNT] = {
[SUBBITMAP_LIBASS] = vc->supports_a8,
[SUBBITMAP_RGBA] = true,
};
double pts = vc->current_image ? vc->current_image->pts : 0;
osd_draw(vo->osd, vc->osd_rect, pts, 0, formats, draw_osd_cb, vo);
}
static int update_presentation_queue_status(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
2009-05-09 15:08:30 +00:00
while (vc->query_surface_num != vc->surface_num) {
VdpTime vtime;
VdpPresentationQueueStatus status;
VdpOutputSurface surface = vc->output_surfaces[vc->query_surface_num];
vdp_st = vdp->presentation_queue_query_surface_status(vc->flip_queue,
surface,
&status, &vtime);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error calling "
"presentation_queue_query_surface_status");
if (mp_msg_test(vo->log, MSGL_TRACE)) {
VdpTime current;
vdp_st = vdp->presentation_queue_get_time(vc->flip_queue, &current);
CHECK_VDP_WARNING(vo, "Error when calling "
"vdp_presentation_queue_get_time");
MP_TRACE(vo, "Vdpau time: %"PRIu64"\n", (uint64_t)current);
MP_TRACE(vo, "Surface %d status: %d time: %"PRIu64"\n",
(int)surface, (int)status, (uint64_t)vtime);
}
if (status == VDP_PRESENTATION_QUEUE_STATUS_QUEUED)
break;
if (vc->vsync_interval > 1) {
uint64_t qtime = vc->queue_time[vc->query_surface_num];
int diff = ((int64_t)vtime - (int64_t)qtime) / 1e6;
MP_TRACE(vo, "Queue time difference: %d ms\n", diff);
if (vtime < qtime + vc->vsync_interval / 2)
MP_VERBOSE(vo, "Frame shown too early (%d ms)\n", diff);
if (vtime > qtime + vc->vsync_interval)
MP_VERBOSE(vo, "Frame shown late (%d ms)\n", diff);
}
vc->query_surface_num = WRAP_ADD(vc->query_surface_num, 1,
vc->num_output_surfaces);
vc->recent_vsync_time = vtime;
}
int num_queued = WRAP_ADD(vc->surface_num, -vc->query_surface_num,
vc->num_output_surfaces);
MP_DBG(vo, "Queued surface count (before add): %d\n", num_queued);
return num_queued;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
}
// Return the timestamp of the vsync that must have happened before ts.
static inline uint64_t prev_vsync(struct vdpctx *vc, uint64_t ts)
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
{
int64_t diff = (int64_t)(ts - vc->recent_vsync_time);
int64_t offset = diff % vc->vsync_interval;
if (offset < 0)
offset += vc->vsync_interval;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
return ts - offset;
}
static void flip_page(struct vo *vo)
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
int64_t pts_us = vc->current_pts;
int duration = vc->current_duration;
vc->dropped_frame = true; // changed at end if false
if (!check_preemption(vo))
goto drop;
vc->vsync_interval = 1;
if (vc->user_fps > 0) {
vc->vsync_interval = 1e9 / vc->user_fps;
} else if (vc->user_fps == 0) {
vc->vsync_interval = vo_get_vsync_interval(vo) * 1000;
}
vc->vsync_interval = MPMAX(vc->vsync_interval, 1);
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
if (duration > INT_MAX / 1000)
duration = -1;
else
duration *= 1000;
if (vc->vsync_interval == 1)
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
duration = -1; // Make sure drop logic is disabled
vo_vdpau: simplify time management and make it more robust vo_vdpau used a somewhat complicated and fragile mechanism to convert the vdpau time to internal mpv time. This was fragile as in it couldn't deal well with Mesa's (apparently) random timestamps, which can change the base offset in multiple situations. It can happen when moving the mpv window to a different screen, and somehow it also happens when pausing the player. It seems this mechanism to synchronize the vdpau time is not actually needed. There are only 2 places where sync_vdptime() is used (i.e. returning the current vdpau time interpolated by system time). The first call is for determining the PTS used to queue a frame. This also uses convert_to_vdptime(). It's easily replaced by querying the time directly, and adding the wait time to it (rel_pts_ns in the patch). The second call is pretty odd: it updates the vdpau time a second time in the same function. From what I can see, this can matter only if update_presentation_queue_status() is very slow. I'm not sure what to make out of this, because the call merely queries the presentation queue. Just assume it isn't slow, and that we don't have to update the time. Another potential issue with this is that we call VdpPresentationQueueGetTime() every frame now, instead of every 5 seconds and interpolating the other calls via system time. More over, this is per video frame (which can be portantially dropped, and not per actually displayed frame. Assume this doesn't matter. This simplifies the code, and should make it more robust on Mesa. But note that what Mesa does is obviously insane - this is one situation where you really need a stable time source. There are still plenty of race condition windows where things can go wrong, although this commit should drastically reduce the possibility of this. In my tests, everything worked well. But I have no access to a Mesa system with vdpau, so it needs testing by others. See github issues #520, #694, #695.
2014-04-07 16:33:25 +00:00
VdpTime vdp_time = 0;
vdp_st = vdp->presentation_queue_get_time(vc->flip_queue, &vdp_time);
CHECK_VDP_WARNING(vo, "Error when calling vdp_presentation_queue_get_time");
int64_t rel_pts_ns = (pts_us - mp_time_us()) * 1000;
if (!pts_us || rel_pts_ns < 0)
rel_pts_ns = 0;
vo_vdpau: simplify time management and make it more robust vo_vdpau used a somewhat complicated and fragile mechanism to convert the vdpau time to internal mpv time. This was fragile as in it couldn't deal well with Mesa's (apparently) random timestamps, which can change the base offset in multiple situations. It can happen when moving the mpv window to a different screen, and somehow it also happens when pausing the player. It seems this mechanism to synchronize the vdpau time is not actually needed. There are only 2 places where sync_vdptime() is used (i.e. returning the current vdpau time interpolated by system time). The first call is for determining the PTS used to queue a frame. This also uses convert_to_vdptime(). It's easily replaced by querying the time directly, and adding the wait time to it (rel_pts_ns in the patch). The second call is pretty odd: it updates the vdpau time a second time in the same function. From what I can see, this can matter only if update_presentation_queue_status() is very slow. I'm not sure what to make out of this, because the call merely queries the presentation queue. Just assume it isn't slow, and that we don't have to update the time. Another potential issue with this is that we call VdpPresentationQueueGetTime() every frame now, instead of every 5 seconds and interpolating the other calls via system time. More over, this is per video frame (which can be portantially dropped, and not per actually displayed frame. Assume this doesn't matter. This simplifies the code, and should make it more robust on Mesa. But note that what Mesa does is obviously insane - this is one situation where you really need a stable time source. There are still plenty of race condition windows where things can go wrong, although this commit should drastically reduce the possibility of this. In my tests, everything worked well. But I have no access to a Mesa system with vdpau, so it needs testing by others. See github issues #520, #694, #695.
2014-04-07 16:33:25 +00:00
uint64_t now = vdp_time;
uint64_t pts = now + rel_pts_ns;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
uint64_t ideal_pts = pts;
uint64_t npts = duration >= 0 ? pts + duration : UINT64_MAX;
/* This should normally never happen.
* - The last queued frame can't have a PTS that goes more than 50ms in the
video: move display and timing to a separate thread The VO is run inside its own thread. It also does most of video timing. The playloop hands the image data and a realtime timestamp to the VO, and the VO does the rest. In particular, this allows the playloop to do other things, instead of blocking for video redraw. But if anything accesses the VO during video timing, it will block. This also fixes vo_sdl.c event handling; but that is only a side-effect, since reimplementing the broken way would require more effort. Also drop --softsleep. In theory, this option helps if the kernel's sleeping mechanism is too inaccurate for video timing. In practice, I haven't ever encountered a situation where it helps, and it just burns CPU cycles. On the other hand it's probably actively harmful, because it prevents the libavcodec decoder threads from doing real work. Side note: Originally, I intended that multiple frames can be queued to the VO. But this is not done, due to problems with OSD and other certain features. OSD in particular is simply designed in a way that it can be neither timed nor copied, so you do have to render it into the video frame before you can draw the next frame. (Subtitles have no such restriction. sd_lavc was even updated to fix this.) It seems the right solution to queuing multiple VO frames is rendering on VO-backed framebuffers, like vo_vdpau.c does. This requires VO driver support, and is out of scope of this commit. As consequence, the VO has a queue size of 1. The existing video queue is just needed to compute frame duration, and will be moved out in the next commit.
2014-08-12 21:02:08 +00:00
* future. This is guaranteed by vo.c, which currently actually queues
* ahead by roughly the flip queue offset. Just to be sure
* give some additional room by doubling the time.
* - The last vsync can never be in the future.
*/
int64_t max_pts_ahead = vc->flip_offset_us * 1000 * 2;
if (vc->last_queue_time > now + max_pts_ahead ||
vc->recent_vsync_time > now)
{
vc->last_queue_time = 0;
vc->recent_vsync_time = 0;
MP_WARN(vo, "Inconsistent timing detected.\n");
}
#define PREV_VSYNC(ts) prev_vsync(vc, ts)
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
/* We hope to be here at least one vsync before the frame should be shown.
* If we are running late then don't drop the frame unless there is
* already one queued for the next vsync; even if we _hope_ to show the
* next frame soon enough to mean this one should be dropped we might
* not make the target time in reality. Without this check we could drop
* every frame, freezing the display completely if video lags behind.
*/
if (now > PREV_VSYNC(MPMAX(pts, vc->last_queue_time + vc->vsync_interval)))
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
npts = UINT64_MAX;
/* Allow flipping a frame at a vsync if its presentation time is a
* bit after that vsync and the change makes the flip time delta
* from previous frame better match the target timestamp delta.
* This avoids instability with frame timestamps falling near vsyncs.
* For example if the frame timestamps were (with vsyncs at
* integer values) 0.01, 1.99, 4.01, 5.99, 8.01, ... then
* straightforward timing at next vsync would flip the frames at
* 1, 2, 5, 6, 9; this changes it to 1, 2, 4, 6, 8 and so on with
* regular 2-vsync intervals.
*
* Also allow moving the frame forward if it looks like we dropped
* the previous frame incorrectly (now that we know better after
* having final exact timestamp information for this frame) and
* there would unnecessarily be a vsync without a frame change.
*/
uint64_t vsync = PREV_VSYNC(pts);
if (pts < vsync + vc->vsync_interval / 4
&& (vsync - PREV_VSYNC(vc->last_queue_time)
> pts - vc->last_ideal_time + vc->vsync_interval / 2
|| (vc->dropped_frame && vsync > vc->dropped_time)))
pts -= vc->vsync_interval / 2;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->dropped_time = ideal_pts;
pts = MPMAX(pts, vc->last_queue_time + vc->vsync_interval);
pts = MPMAX(pts, now);
if (npts < PREV_VSYNC(pts) + vc->vsync_interval)
goto drop;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
int num_flips = update_presentation_queue_status(vo);
vsync = vc->recent_vsync_time + num_flips * vc->vsync_interval;
pts = MPMAX(pts, now);
pts = MPMAX(pts, vsync + (vc->vsync_interval >> 2));
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vsync = PREV_VSYNC(pts);
if (npts < vsync + vc->vsync_interval)
goto drop;
pts = vsync + (vc->vsync_interval >> 2);
VdpOutputSurface frame = vc->output_surfaces[vc->surface_num];
vdp_st = vdp->presentation_queue_display(vc->flip_queue, frame,
vo->dwidth, vo->dheight, pts);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_presentation_queue_display");
vo_vdpau: simplify time management and make it more robust vo_vdpau used a somewhat complicated and fragile mechanism to convert the vdpau time to internal mpv time. This was fragile as in it couldn't deal well with Mesa's (apparently) random timestamps, which can change the base offset in multiple situations. It can happen when moving the mpv window to a different screen, and somehow it also happens when pausing the player. It seems this mechanism to synchronize the vdpau time is not actually needed. There are only 2 places where sync_vdptime() is used (i.e. returning the current vdpau time interpolated by system time). The first call is for determining the PTS used to queue a frame. This also uses convert_to_vdptime(). It's easily replaced by querying the time directly, and adding the wait time to it (rel_pts_ns in the patch). The second call is pretty odd: it updates the vdpau time a second time in the same function. From what I can see, this can matter only if update_presentation_queue_status() is very slow. I'm not sure what to make out of this, because the call merely queries the presentation queue. Just assume it isn't slow, and that we don't have to update the time. Another potential issue with this is that we call VdpPresentationQueueGetTime() every frame now, instead of every 5 seconds and interpolating the other calls via system time. More over, this is per video frame (which can be portantially dropped, and not per actually displayed frame. Assume this doesn't matter. This simplifies the code, and should make it more robust on Mesa. But note that what Mesa does is obviously insane - this is one situation where you really need a stable time source. There are still plenty of race condition windows where things can go wrong, although this commit should drastically reduce the possibility of this. In my tests, everything worked well. But I have no access to a Mesa system with vdpau, so it needs testing by others. See github issues #520, #694, #695.
2014-04-07 16:33:25 +00:00
MP_TRACE(vo, "Queue new surface %d: Vdpau time: %"PRIu64" "
"pts: %"PRIu64"\n", (int)frame, now, pts);
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->last_queue_time = pts;
vc->queue_time[vc->surface_num] = pts;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->last_ideal_time = ideal_pts;
vc->dropped_frame = false;
vc->surface_num = WRAP_ADD(vc->surface_num, 1, vc->num_output_surfaces);
return;
drop:
vo_increment_drop_count(vo, 1);
}
static void draw_frame(struct vo *vo, struct vo_frame *frame)
{
struct vdpctx *vc = vo->priv;
check_preemption(vo);
if (frame->current && !frame->redraw) {
struct mp_image *vdp_mpi =
mp_vdpau_upload_video_surface(vc->mpvdp, frame->current);
if (!vdp_mpi)
MP_ERR(vo, "Could not upload image.\n");
talloc_free(vc->current_image);
vc->current_image = vdp_mpi;
}
vc->current_pts = frame->pts;
vc->current_duration = frame->duration;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
if (status_ok(vo)) {
video_to_output_surface(vo, vc->current_image);
draw_osd(vo);
}
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
}
2011-10-06 18:46:01 +00:00
// warning: the size and pixel format of surface must match that of the
// surfaces in vc->output_surfaces
2013-12-21 17:05:23 +00:00
static struct mp_image *read_output_surface(struct vo *vo,
VdpOutputSurface surface)
2011-10-06 18:46:01 +00:00
{
2013-12-21 17:05:23 +00:00
struct vdpctx *vc = vo->priv;
2011-10-06 18:46:01 +00:00
VdpStatus vdp_st;
struct vdp_functions *vdp = vc->vdp;
if (!vo->params)
return NULL;
VdpRGBAFormat fmt;
uint32_t w, h;
vdp_st = vdp->output_surface_get_parameters(surface, &fmt, &w, &h);
if (vdp_st != VDP_STATUS_OK)
return NULL;
assert(fmt == OUTPUT_RGBA_FORMAT);
struct mp_image *image = mp_image_alloc(IMGFMT_BGR0, w, h);
if (!image)
return NULL;
2011-10-06 18:46:01 +00:00
void *dst_planes[] = { image->planes[0] };
uint32_t dst_pitches[] = { image->stride[0] };
vdp_st = vdp->output_surface_get_bits_native(surface, NULL, dst_planes,
dst_pitches);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_output_surface_get_bits_native");
2011-10-06 18:46:01 +00:00
return image;
}
static struct mp_image *get_window_screenshot(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
int last_surface = WRAP_ADD(vc->surface_num, -1, vc->num_output_surfaces);
VdpOutputSurface screen = vc->output_surfaces[last_surface];
struct mp_image *image = read_output_surface(vo, screen);
if (image && image->w >= vo->dwidth && image->h >= vo->dheight)
mp_image_set_size(image, vo->dwidth, vo->dheight);
2011-10-06 18:46:01 +00:00
return image;
}
static int query_format(struct vo *vo, int format)
{
struct vdpctx *vc = vo->priv;
if (mp_vdpau_get_format(format, NULL, NULL))
return 1;
if (!vc->force_yuv && mp_vdpau_get_rgb_format(format, NULL))
return 1;
return 0;
}
static void destroy_vdpau_objects(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
free_video_specific(vo);
if (vc->flip_queue != VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_destroy(vc->flip_queue);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_presentation_queue_destroy");
}
if (vc->flip_target != VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_target_destroy(vc->flip_target);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling "
2009-05-09 15:08:30 +00:00
"vdp_presentation_queue_target_destroy");
}
for (int i = 0; i < vc->num_output_surfaces; i++) {
if (vc->output_surfaces[i] == VDP_INVALID_HANDLE)
continue;
vdp_st = vdp->output_surface_destroy(vc->output_surfaces[i]);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_output_surface_destroy");
}
if (vc->rotation_surface != VDP_INVALID_HANDLE) {
vdp_st = vdp->output_surface_destroy(vc->rotation_surface);
CHECK_VDP_WARNING(vo, "Error when calling vdp_output_surface_destroy");
}
for (int i = 0; i < MAX_OSD_PARTS; i++) {
struct osd_bitmap_surface *sfc = &vc->osd_surfaces[i];
if (sfc->surface != VDP_INVALID_HANDLE) {
vdp_st = vdp->bitmap_surface_destroy(sfc->surface);
2013-12-21 17:05:23 +00:00
CHECK_VDP_WARNING(vo, "Error when calling vdp_bitmap_surface_destroy");
}
}
mp_vdpau_destroy(vc->mpvdp);
vc->mpvdp = NULL;
}
2009-05-04 00:09:50 +00:00
static void uninit(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
hwdec_devices_remove(vo->hwdec_devs, &vc->mpvdp->hwctx);
hwdec_devices_destroy(vo->hwdec_devs);
/* Destroy all vdpau objects */
mp_vdpau_mixer_destroy(vc->video_mixer);
destroy_vdpau_objects(vo);
2009-05-04 00:09:50 +00:00
vo_x11_uninit(vo);
}
static int preinit(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
if (!vo_x11_init(vo))
return -1;
if (!vo_x11_create_vo_window(vo, NULL, "vdpau")) {
vo_x11_uninit(vo);
return -1;
}
vc->mpvdp = mp_vdpau_create_device_x11(vo->log, vo->x11->display, false);
if (!vc->mpvdp) {
vo_x11_uninit(vo);
return -1;
}
vdpau: split off decoder parts, use "new" libavcodec vdpau hwaccel API Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This file is named so because because it's written against the "old" libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau"). Add support for the "new" libavcodec vdpau support. This was recently added and replaces the "old" vdpau parts. (In fact, Libav is about to deprecate and remove the "old" API without deprecation grace period, so we have to support it now. Moreover, there will probably be no Libav release which supports both, so the transition is even less smooth than we could hope, and we have to support both the old and new API.) Whether the old or new API is used is checked by a configure test: if the new API is found, it is used, otherwise the old API is assumed. Some details might be handled differently. Especially display preemption is a bit problematic with the "new" libavcodec vdpau support: it wants to keep a pointer to a specific vdpau API function (which can be driver specific, because preemption might switch drivers). Also, surface IDs are now directly stored in AVFrames (and mp_images), so they can't be forced to VDP_INVALID_HANDLE on preemption. (This changes even with older libavcodec versions, because mp_image always uses the newer representation to make vo_vdpau.c simpler.) Decoder initialization in the new code tries to deal with codec profiles, while the old code always uses the highest profile per codec. Surface allocation changes. Since the decoder won't call config() in vo_vdpau.c on video size change anymore, we allow allocating surfaces of arbitrary size instead of locking it to what the VO was configured. The non-hwdec code also has slightly different allocation behavior now. Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau doesn't work anymore (a warning suggesting the --hwdec option is printed instead).
2013-07-27 23:49:45 +00:00
vo->hwdec_devs = hwdec_devices_create();
hwdec_devices_add(vo->hwdec_devs, &vc->mpvdp->hwctx);
vc->video_mixer = mp_vdpau_mixer_create(vc->mpvdp, vo->log);
vc->video_mixer->video_eq = mp_csp_equalizer_create(vo, vo->global);
if (mp_vdpau_guess_if_emulated(vc->mpvdp)) {
MP_WARN(vo, "VDPAU is most likely emulated via VA-API.\n"
"This is inefficient. Use --vo=gpu instead.\n");
}
2009-05-08 18:48:01 +00:00
// Mark everything as invalid first so uninit() can tell what has been
// allocated
mark_vdpau_objects_uninitialized(vo);
2009-05-08 18:48:01 +00:00
mp_vdpau_handle_preemption(vc->mpvdp, &vc->preemption_counter);
vc->vdp_device = vc->mpvdp->vdp_device;
vc->vdp = &vc->mpvdp->vdp;
vc->vdp->bitmap_surface_query_capabilities(vc->vdp_device, VDP_RGBA_FORMAT_A8,
&vc->supports_a8, &(uint32_t){0}, &(uint32_t){0});
MP_WARN(vo, "Warning: this compatibility VO is low quality and may "
"have issues with OSD, scaling, screenshots and more.\n"
"vo=gpu is the preferred choice in any case and "
"includes VDPAU support via hwdec=vdpau or vdpau-copy.\n");
return 0;
}
static void checked_resize(struct vo *vo)
{
if (!status_ok(vo))
return;
resize(vo);
}
2009-05-04 00:09:50 +00:00
static int control(struct vo *vo, uint32_t request, void *data)
{
struct vdpctx *vc = vo->priv;
check_preemption(vo);
switch (request) {
case VOCTRL_SET_PANSCAN:
checked_resize(vo);
return VO_TRUE;
case VOCTRL_SET_EQUALIZER:
vo->want_redraw = true;
return true;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
case VOCTRL_RESET:
forget_frames(vo, true);
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
return true;
case VOCTRL_SCREENSHOT_WIN:
if (!status_ok(vo))
return false;
*(struct mp_image **)data = get_window_screenshot(vo);
2011-10-06 18:46:01 +00:00
return true;
case VOCTRL_GET_PREF_DEINT:
*(int *)data = vc->deint;
return true;
}
2013-05-16 12:02:28 +00:00
int events = 0;
int r = vo_x11_control(vo, &events, request, data);
if (events & VO_EVENT_RESIZE) {
checked_resize(vo);
} else if (events & VO_EVENT_EXPOSE) {
vo->want_redraw = true;
}
vo_event(vo, events);
2013-05-16 12:02:28 +00:00
return r;
}
#define OPT_BASE_STRUCT struct vdpctx
2009-05-04 00:09:50 +00:00
const struct vo_driver video_out_vdpau = {
.description = "VDPAU with X11",
.name = "vdpau",
.caps = VO_CAP_FRAMEDROP | VO_CAP_ROTATE90,
2009-05-04 00:09:50 +00:00
.preinit = preinit,
.query_format = query_format,
.reconfig = reconfig,
2009-05-04 00:09:50 +00:00
.control = control,
.draw_frame = draw_frame,
.flip_page = flip_page,
.wakeup = vo_x11_wakeup,
.wait_events = vo_x11_wait_events,
2009-05-04 00:09:50 +00:00
.uninit = uninit,
.priv_size = sizeof(struct vdpctx),
.options = (const struct m_option []){
{"deint", OPT_INT(deint), M_RANGE(-4, 4)},
{"chroma-deint", OPT_FLAG(chroma_deint), OPTDEF_INT(1)},
{"pullup", OPT_FLAG(pullup)},
{"denoise", OPT_FLOAT(denoise), M_RANGE(0, 1)},
{"sharpen", OPT_FLOAT(sharpen), M_RANGE(-1, 1)},
{"hqscaling", OPT_INT(hqscaling), M_RANGE(0, 9)},
{"fps", OPT_FLOAT(user_fps)},
{"composite-detect", OPT_FLAG(composite_detect), OPTDEF_INT(1)},
{"queuetime-windowed", OPT_INT(flip_offset_window), OPTDEF_INT(50)},
{"queuetime-fs", OPT_INT(flip_offset_fs), OPTDEF_INT(50)},
{"output-surfaces", OPT_INT(num_output_surfaces),
M_RANGE(2, MAX_OUTPUT_SURFACES), OPTDEF_INT(3)},
{"colorkey", OPT_COLOR(colorkey),
.defval = &(const struct m_color){.r = 2, .g = 5, .b = 7, .a = 255}},
{"force-yuv", OPT_FLAG(force_yuv)},
{"queuetime_windowed", OPT_REPLACED("queuetime-windowed")},
{"queuetime_fs", OPT_REPLACED("queuetime-fs")},
{"output_surfaces", OPT_REPLACED("output-surfaces")},
{NULL},
},
.options_prefix = "vo-vdpau",
2009-05-04 00:09:50 +00:00
};