mpv/libvo/vo_vdpau.c

1835 lines
65 KiB
C
Raw Normal View History

/*
* VDPAU video output driver
*
* Copyright (C) 2008 NVIDIA
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
* Copyright (C) 2009 Uoti Urpala
*
* This file is part of MPlayer.
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* MPlayer is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
2009-05-09 15:08:30 +00:00
/*
* Actual decoding and presentation are implemented here.
* All necessary frame information is collected through
* the "vdpau_render_state" structure after parsing all headers
* etc. in libavcodec for different codecs.
*/
#include <stdio.h>
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
#include <limits.h>
#include "config.h"
#include "mp_msg.h"
2009-05-04 00:09:50 +00:00
#include "options.h"
#include "talloc.h"
#include "video_out.h"
#include "x11_common.h"
#include "aspect.h"
#include "sub.h"
#include "subopt-helper.h"
2009-05-04 00:09:50 +00:00
#include "libmpcodecs/vfcap.h"
#include "libmpcodecs/mp_image.h"
#include "osdep/timer.h"
#include "libavcodec/vdpau.h"
#include "font_load.h"
#include "libavutil/common.h"
#include "libavutil/mathematics.h"
#include "ass_mp.h"
#define WRAP_ADD(x, a, m) ((a) < 0 \
? ((x)+(a)+(m) < (m) ? (x)+(a)+(m) : (x)+(a)) \
: ((x)+(a) < (m) ? (x)+(a) : (x)+(a)-(m)))
#define CHECK_ST_ERROR(message) \
do { \
if (vdp_st != VDP_STATUS_OK) { \
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] %s: %s\n", \
message, vdp->get_error_string(vdp_st)); \
return -1; \
} \
} while (0)
#define CHECK_ST_WARNING(message) \
do { \
if (vdp_st != VDP_STATUS_OK) \
mp_msg(MSGT_VO, MSGL_WARN, "[ vdpau] %s: %s\n", \
message, vdp->get_error_string(vdp_st)); \
} while (0)
/* number of video and output surfaces */
#define MAX_OUTPUT_SURFACES 15
#define MAX_VIDEO_SURFACES 50
#define NUM_BUFFERED_VIDEO 4
/* number of palette entries */
#define PALETTE_SIZE 256
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
/* Initial size of EOSD surface in pixels (x*x) */
#define EOSD_SURFACE_INITIAL_SIZE 256
/*
* Global variable declaration - VDPAU specific
*/
struct vdp_functions {
#define VDP_FUNCTION(vdp_type, _, mp_name) vdp_type *mp_name;
#include "vdpau_template.c"
#undef VDP_FUNCTION
};
struct vdpctx {
struct vdp_functions *vdp;
VdpDevice vdp_device;
bool is_preempted;
bool preemption_acked;
bool preemption_user_notified;
unsigned int last_preemption_retry_fail;
VdpGetProcAddress *vdp_get_proc_address;
VdpPresentationQueueTarget flip_target;
VdpPresentationQueue flip_queue;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
uint64_t last_vdp_time;
unsigned int last_sync_update;
/* an extra last output surface is misused for OSD. */
VdpOutputSurface output_surfaces[MAX_OUTPUT_SURFACES + 1];
int num_output_surfaces;
struct buffered_video_surface {
VdpVideoSurface surface;
double pts;
mp_image_t *mpi;
} buffered_video[NUM_BUFFERED_VIDEO];
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
int deint_queue_pos;
int output_surface_width, output_surface_height;
VdpVideoMixer video_mixer;
int user_colorspace;
int colorspace;
int studio_levels;
int deint;
int deint_type;
int deint_counter;
int pullup;
float denoise;
float sharpen;
int hqscaling;
int chroma_deint;
int flip_offset_window;
int flip_offset_fs;
int top_field_first;
bool flip;
VdpDecoder decoder;
int decoder_max_refs;
VdpRect src_rect_vid;
VdpRect out_rect_vid;
int border_x, border_y;
struct vdpau_render_state surface_render[MAX_VIDEO_SURFACES];
int surface_num;
int query_surface_num;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
VdpTime recent_vsync_time;
float user_fps;
unsigned int vsync_interval;
uint64_t last_queue_time;
uint64_t queue_time[MAX_OUTPUT_SURFACES];
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
uint64_t last_ideal_time;
bool dropped_frame;
uint64_t dropped_time;
uint32_t vid_width, vid_height;
uint32_t image_format;
VdpChromaType vdp_chroma_type;
VdpYCbCrFormat vdp_pixel_format;
/* draw_osd */
unsigned char *index_data;
int index_data_size;
uint32_t palette[PALETTE_SIZE];
// EOSD
// Pool of surfaces
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
struct eosd_bitmap_surface {
VdpBitmapSurface surface;
int w;
int h;
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
uint32_t max_width;
uint32_t max_height;
} eosd_surface;
// List of surfaces to be rendered
2009-05-09 15:08:30 +00:00
struct eosd_target {
VdpRect source;
VdpRect dest;
VdpColor color;
} *eosd_targets;
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
int eosd_targets_size;
int *eosd_scratch;
int eosd_render_count;
// Video equalizer
VdpProcamp procamp;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
int num_shown_frames;
bool paused;
2009-05-08 18:48:01 +00:00
// These tell what's been initialized and uninit() should free/uninitialize
bool mode_switched;
};
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
static int change_vdptime_sync(struct vdpctx *vc, unsigned int *t)
{
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
VdpTime vdp_time;
vdp_st = vdp->presentation_queue_get_time(vc->flip_queue, &vdp_time);
CHECK_ST_ERROR("Error when calling vdp_presentation_queue_get_time");
unsigned int t1 = *t;
unsigned int t2 = GetTimer();
uint64_t old = vc->last_vdp_time + (t1 - vc->last_sync_update) * 1000ULL;
if (vdp_time > old)
if (vdp_time > old + (t2 - t1) * 1000ULL)
vdp_time -= (t2 - t1) * 1000ULL;
else
vdp_time = old;
mp_msg(MSGT_VO, MSGL_V, "[vdpau] adjusting VdpTime offset by %f µs\n",
(int64_t)(vdp_time - old) / 1000.);
vc->last_vdp_time = vdp_time;
vc->last_sync_update = t1;
*t = t2;
return 0;
}
static uint64_t sync_vdptime(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
unsigned int t = GetTimer();
if (t - vc->last_sync_update > 5000000)
change_vdptime_sync(vc, &t);
uint64_t now = (t - vc->last_sync_update) * 1000ULL + vc->last_vdp_time;
// Make sure nanosecond inaccuracies don't make things inconsistent
now = FFMAX(now, vc->recent_vsync_time);
return now;
}
static uint64_t convert_to_vdptime(struct vo *vo, unsigned int t)
{
struct vdpctx *vc = vo->priv;
return (int)(t - vc->last_sync_update) * 1000LL + vc->last_vdp_time;
}
static void flip_page_timed(struct vo *vo, unsigned int pts_us, int duration);
static int video_to_output_surface(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpTime dummy;
VdpStatus vdp_st;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
if (vc->deint_queue_pos < 0)
return -1;
struct buffered_video_surface *bv = vc->buffered_video;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
int field = VDP_VIDEO_MIXER_PICTURE_STRUCTURE_FRAME;
unsigned int dp = vc->deint_queue_pos;
// dp==0 means last field of latest frame, 1 earlier field of latest frame,
// 2 last field of previous frame and so on
if (vc->deint) {
field = vc->top_field_first ^ (dp & 1) ?
VDP_VIDEO_MIXER_PICTURE_STRUCTURE_BOTTOM_FIELD:
VDP_VIDEO_MIXER_PICTURE_STRUCTURE_TOP_FIELD;
}
const VdpVideoSurface *past_fields = (const VdpVideoSurface []){
bv[(dp+1)/2].surface, bv[(dp+2)/2].surface};
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
const VdpVideoSurface *future_fields = (const VdpVideoSurface []){
dp >= 1 ? bv[(dp-1)/2].surface : VDP_INVALID_HANDLE};
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
VdpOutputSurface output_surface = vc->output_surfaces[vc->surface_num];
vdp_st = vdp->presentation_queue_block_until_surface_idle(vc->flip_queue,
output_surface,
&dummy);
CHECK_ST_WARNING("Error when calling "
"vdp_presentation_queue_block_until_surface_idle");
vdp_st = vdp->video_mixer_render(vc->video_mixer, VDP_INVALID_HANDLE,
0, field, 2, past_fields,
bv[dp/2].surface, 1, future_fields,
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
&vc->src_rect_vid, output_surface,
NULL, &vc->out_rect_vid, 0, NULL);
CHECK_ST_WARNING("Error when calling vdp_video_mixer_render");
return 0;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
}
static void get_buffered_frame(struct vo *vo, bool eof)
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
{
struct vdpctx *vc = vo->priv;
int dqp = vc->deint_queue_pos;
if (dqp < 0)
dqp += 1000;
else
dqp = vc->deint >= 2 ? dqp - 1 : dqp - 2 | 1;
if (dqp < (eof ? 0 : 3))
return;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
dqp = FFMIN(dqp, 4);
vc->deint_queue_pos = dqp;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
vo->frame_loaded = true;
// Set pts values
struct buffered_video_surface *bv = vc->buffered_video;
int idx = vc->deint_queue_pos >> 1;
if (idx == 0) { // no future frame/pts available
vo->next_pts = bv[0].pts;
vo->next_pts2 = MP_NOPTS_VALUE;
} else if (!(vc->deint >= 2)) { // no field-splitting deinterlace
vo->next_pts = bv[idx].pts;
vo->next_pts2 = bv[idx - 1].pts;
} else { // deinterlace with separate fields
double intermediate_pts;
double diff = bv[idx - 1].pts - bv[idx].pts;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
if (diff > 0 && diff < 0.5)
intermediate_pts = (bv[idx].pts + bv[idx - 1].pts) / 2;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
else
intermediate_pts = bv[idx].pts;
if (vc->deint_queue_pos & 1) { // first field
vo->next_pts = bv[idx].pts;
vo->next_pts2 = intermediate_pts;
} else {
vo->next_pts = intermediate_pts;
vo->next_pts2 = bv[idx - 1].pts;
}
}
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
video_to_output_surface(vo);
}
static void add_new_video_surface(struct vo *vo, VdpVideoSurface surface,
struct mp_image *reserved_mpi, double pts)
{
struct vdpctx *vc = vo->priv;
struct buffered_video_surface *bv = vc->buffered_video;
if (reserved_mpi)
reserved_mpi->usage_count++;
if (bv[NUM_BUFFERED_VIDEO - 1].mpi)
bv[NUM_BUFFERED_VIDEO - 1].mpi->usage_count--;
for (int i = NUM_BUFFERED_VIDEO - 1; i > 0; i--)
bv[i] = bv[i - 1];
bv[0] = (struct buffered_video_surface){
.mpi = reserved_mpi,
.surface = surface,
.pts = pts,
};
vc->deint_queue_pos += 2;
get_buffered_frame(vo, false);
}
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
static void forget_frames(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
vc->deint_queue_pos = -1001;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->dropped_frame = false;
for (int i = 0; i < NUM_BUFFERED_VIDEO; i++) {
struct buffered_video_surface *p = vc->buffered_video + i;
if (p->mpi)
p->mpi->usage_count--;
*p = (struct buffered_video_surface){
.surface = VDP_INVALID_HANDLE,
};
}
}
2009-05-04 00:09:50 +00:00
static void resize(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
int i;
struct vo_rect src_rect;
struct vo_rect dst_rect;
struct vo_rect borders;
calc_src_dst_rects(vo, vc->vid_width, vc->vid_height, &src_rect, &dst_rect,
2009-05-04 00:09:50 +00:00
&borders, NULL);
vc->out_rect_vid.x0 = dst_rect.left;
vc->out_rect_vid.x1 = dst_rect.right;
vc->out_rect_vid.y0 = dst_rect.top;
vc->out_rect_vid.y1 = dst_rect.bottom;
vc->src_rect_vid.x0 = src_rect.left;
vc->src_rect_vid.x1 = src_rect.right;
vc->src_rect_vid.y0 = vc->flip ? src_rect.bottom : src_rect.top;
vc->src_rect_vid.y1 = vc->flip ? src_rect.top : src_rect.bottom;
vc->border_x = borders.left;
vc->border_y = borders.top;
#ifdef CONFIG_FREETYPE
// adjust font size to display size
force_load_font = 1;
#endif
vo_osd_changed(OSDTYPE_OSD);
int flip_offset_ms = vo_fs ? vc->flip_offset_fs : vc->flip_offset_window;
vo->flip_queue_offset = flip_offset_ms / 1000.;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
bool had_frames = vc->num_shown_frames;
2009-05-09 15:08:30 +00:00
if (vc->output_surface_width < vo->dwidth
|| vc->output_surface_height < vo->dheight) {
if (vc->output_surface_width < vo->dwidth) {
vc->output_surface_width += vc->output_surface_width >> 1;
2009-05-09 15:08:30 +00:00
vc->output_surface_width = FFMAX(vc->output_surface_width,
vo->dwidth);
}
if (vc->output_surface_height < vo->dheight) {
vc->output_surface_height += vc->output_surface_height >> 1;
2009-05-09 15:08:30 +00:00
vc->output_surface_height = FFMAX(vc->output_surface_height,
vo->dheight);
}
// Creation of output_surfaces
for (i = 0; i <= vc->num_output_surfaces; i++) {
if (vc->output_surfaces[i] != VDP_INVALID_HANDLE)
vdp->output_surface_destroy(vc->output_surfaces[i]);
2009-05-09 15:08:30 +00:00
vdp_st = vdp->output_surface_create(vc->vdp_device,
VDP_RGBA_FORMAT_B8G8R8A8,
vc->output_surface_width,
vc->output_surface_height,
&vc->output_surfaces[i]);
CHECK_ST_WARNING("Error when calling vdp_output_surface_create");
mp_msg(MSGT_VO, MSGL_DBG2, "OUT CREATE: %u\n",
vc->output_surfaces[i]);
}
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->num_shown_frames = 0;
}
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
if (vc->paused && had_frames)
if (video_to_output_surface(vo) >= 0)
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
flip_page_timed(vo, 0, -1);
}
static void preemption_callback(VdpDevice device, void *context)
{
struct vdpctx *vc = context;
vc->is_preempted = true;
vc->preemption_acked = false;
}
/* Initialize vdp_get_proc_address, called from preinit() */
2009-05-04 00:09:50 +00:00
static int win_x11_init_vdpau_procs(struct vo *vo)
{
2009-05-04 00:09:50 +00:00
struct vo_x11_state *x11 = vo->x11;
struct vdpctx *vc = vo->priv;
talloc_free(vc->vdp); // In case this is reinitialization after preemption
struct vdp_functions *vdp = talloc_zero(vc, struct vdp_functions);
vc->vdp = vdp;
VdpStatus vdp_st;
struct vdp_function {
const int id;
int offset;
};
const struct vdp_function *dsc;
static const struct vdp_function vdp_func[] = {
#define VDP_FUNCTION(_, macro_name, mp_name) {macro_name, offsetof(struct vdp_functions, mp_name)},
#include "vdpau_template.c"
#undef VDP_FUNCTION
{0, -1}
};
vdp_st = vdp_device_create_x11(x11->display, x11->screen,&vc->vdp_device,
2009-05-09 15:08:30 +00:00
&vc->vdp_get_proc_address);
if (vdp_st != VDP_STATUS_OK) {
2009-05-09 15:08:30 +00:00
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] Error when calling "
"vdp_device_create_x11: %i\n", vdp_st);
return -1;
}
vdp->get_error_string = NULL;
for (dsc = vdp_func; dsc->offset >= 0; dsc++) {
vdp_st = vc->vdp_get_proc_address(vc->vdp_device, dsc->id,
(void **)((char *)vdp + dsc->offset));
if (vdp_st != VDP_STATUS_OK) {
2009-05-09 15:08:30 +00:00
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] Error when calling "
"vdp_get_proc_address(function id %d): %s\n", dsc->id,
vdp->get_error_string ? vdp->get_error_string(vdp_st) : "?");
return -1;
}
}
vdp_st = vdp->preemption_callback_register(vc->vdp_device,
preemption_callback, vc);
return 0;
}
2009-05-04 00:09:50 +00:00
static int win_x11_init_vdpau_flip_queue(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
2009-05-04 00:09:50 +00:00
struct vo_x11_state *x11 = vo->x11;
VdpStatus vdp_st;
if (vc->flip_target == VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_target_create_x11(vc->vdp_device,
x11->window,
&vc->flip_target);
CHECK_ST_ERROR("Error when calling "
"vdp_presentation_queue_target_create_x11");
}
/* Emperically this seems to be the first call which fails when we
* try to reinit after preemption while the user is still switched
* from X to a virtual terminal (creating the vdp_device initially
* succeeds, as does creating the flip_target above). This is
* probably not guaranteed behavior, but we'll assume it as a simple
* way to reduce warnings while trying to recover from preemption.
*/
if (vc->flip_queue == VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_create(vc->vdp_device, vc->flip_target,
&vc->flip_queue);
if (vc->is_preempted && vdp_st != VDP_STATUS_OK) {
mp_msg(MSGT_VO, MSGL_DBG2, "[vdpau] Failed to create flip queue "
"while preempted: %s\n", vdp->get_error_string(vdp_st));
return -1;
} else
CHECK_ST_ERROR("Error when calling vdp_presentation_queue_create");
}
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
VdpTime vdp_time;
vdp_st = vdp->presentation_queue_get_time(vc->flip_queue, &vdp_time);
CHECK_ST_ERROR("Error when calling vdp_presentation_queue_get_time");
vc->last_vdp_time = vdp_time;
vc->last_sync_update = GetTimer();
vc->vsync_interval = 1;
if (vc->user_fps > 0) {
vc->vsync_interval = 1e9 / vc->user_fps;
mp_msg(MSGT_VO, MSGL_INFO, "[vdpau] Assuming user-specified display "
"refresh rate of %.3f Hz.\n", vc->user_fps);
} else if (vc->user_fps == 0) {
#ifdef CONFIG_XF86VM
double fps = vo_vm_get_fps(vo);
if (!fps)
mp_msg(MSGT_VO, MSGL_WARN, "[vdpau] Failed to get display FPS\n");
else {
vc->vsync_interval = 1e9 / fps;
// This is verbose, but I'm not yet sure how common wrong values are
mp_msg(MSGT_VO, MSGL_INFO,
"[vdpau] Got display refresh rate %.3f Hz.\n"
"[vdpau] If that value looks wrong give the "
"-vo vdpau:fps=X suboption manually.\n", fps);
}
#else
mp_msg(MSGT_VO, MSGL_INFO, "[vdpau] This binary has been compiled "
"without XF86VidMode support.\n");
mp_msg(MSGT_VO, MSGL_INFO, "[vdpau] Can't use vsync-aware timing "
"without manually provided -vo vdpau:fps=X suboption.\n");
#endif
} else
mp_msg(MSGT_VO, MSGL_V, "[vdpau] framedrop/timing logic disabled by "
"user.\n");
return 0;
}
static int set_video_attribute(struct vdpctx *vc, VdpVideoMixerAttribute attr,
const void *value, char *attr_name)
{
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
vdp_st = vdp->video_mixer_set_attribute_values(vc->video_mixer, 1, &attr,
&value);
if (vdp_st != VDP_STATUS_OK) {
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] Error setting video mixer "
"attribute %s: %s\n", attr_name, vdp->get_error_string(vdp_st));
return -1;
}
return 0;
}
static void update_csc_matrix(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
const VdpColorStandard vdp_colors[] = {VDP_COLOR_STANDARD_ITUR_BT_601,
VDP_COLOR_STANDARD_ITUR_BT_709,
VDP_COLOR_STANDARD_SMPTE_240M};
char * const vdp_names[] = {"BT.601", "BT.709", "SMPTE-240M"};
int csp = vc->colorspace;
mp_msg(MSGT_VO, MSGL_V, "[vdpau] Updating CSC matrix for %s\n",
vdp_names[csp]);
VdpCSCMatrix matrix;
vdp_st = vdp->generate_csc_matrix(&vc->procamp, vdp_colors[csp], &matrix);
CHECK_ST_WARNING("Error when generating CSC matrix");
if (vc->studio_levels) {
/* Modify matrix to change output range from 0..255 to 16..235.
* Clipping limits can't be changed, so out-of-range results that
* would have been clipped to 0 or 255 before can still go below
* 16 or above 235.
*/
for (int i = 0; i < 3; i++) {
for (int j = 0; j < 4; j++)
matrix[i][j] *= 220. / 256;
matrix[i][3] += 16. / 256;
}
}
set_video_attribute(vc, VDP_VIDEO_MIXER_ATTRIBUTE_CSC_MATRIX,
&matrix, "CSC matrix");
}
#define SET_VIDEO_ATTR(attr_name, attr_type, value) set_video_attribute(vc, \
VDP_VIDEO_MIXER_ATTRIBUTE_ ## attr_name, &(attr_type){value},\
# attr_name)
static int create_vdp_mixer(struct vo *vo, VdpChromaType vdp_chroma_type)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
#define VDP_NUM_MIXER_PARAMETER 3
#define MAX_NUM_FEATURES 6
int i;
VdpStatus vdp_st;
if (vc->video_mixer != VDP_INVALID_HANDLE)
return 0;
int feature_count = 0;
VdpVideoMixerFeature features[MAX_NUM_FEATURES];
VdpBool feature_enables[MAX_NUM_FEATURES];
static const VdpVideoMixerParameter parameters[VDP_NUM_MIXER_PARAMETER] = {
VDP_VIDEO_MIXER_PARAMETER_VIDEO_SURFACE_WIDTH,
VDP_VIDEO_MIXER_PARAMETER_VIDEO_SURFACE_HEIGHT,
2009-05-09 15:08:30 +00:00
VDP_VIDEO_MIXER_PARAMETER_CHROMA_TYPE,
};
const void *const parameter_values[VDP_NUM_MIXER_PARAMETER] = {
&vc->vid_width,
&vc->vid_height,
2009-05-09 15:08:30 +00:00
&vdp_chroma_type,
};
features[feature_count++] = VDP_VIDEO_MIXER_FEATURE_DEINTERLACE_TEMPORAL;
if (vc->deint == 4)
2009-05-09 15:08:30 +00:00
features[feature_count++] =
VDP_VIDEO_MIXER_FEATURE_DEINTERLACE_TEMPORAL_SPATIAL;
if (vc->pullup)
features[feature_count++] = VDP_VIDEO_MIXER_FEATURE_INVERSE_TELECINE;
if (vc->denoise)
features[feature_count++] = VDP_VIDEO_MIXER_FEATURE_NOISE_REDUCTION;
if (vc->sharpen)
features[feature_count++] = VDP_VIDEO_MIXER_FEATURE_SHARPNESS;
if (vc->hqscaling) {
VdpVideoMixerFeature hqscaling_feature =
VDP_VIDEO_MIXER_FEATURE_HIGH_QUALITY_SCALING_L1 + vc->hqscaling-1;
VdpBool hqscaling_available;
vdp_st = vdp->video_mixer_query_feature_support(vc->vdp_device,
hqscaling_feature,
&hqscaling_available);
CHECK_ST_ERROR("Error when calling video_mixer_query_feature_support");
if (hqscaling_available)
features[feature_count++] = hqscaling_feature;
else
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] Your hardware or VDPAU "
"library does not support requested hqscaling.\n");
}
vdp_st = vdp->video_mixer_create(vc->vdp_device, feature_count, features,
2009-05-09 15:08:30 +00:00
VDP_NUM_MIXER_PARAMETER,
parameters, parameter_values,
&vc->video_mixer);
CHECK_ST_ERROR("Error when calling vdp_video_mixer_create");
2009-05-09 15:08:30 +00:00
for (i = 0; i < feature_count; i++)
feature_enables[i] = VDP_TRUE;
if (vc->deint < 3)
feature_enables[0] = VDP_FALSE;
if (feature_count) {
vdp_st = vdp->video_mixer_set_feature_enables(vc->video_mixer,
feature_count, features,
feature_enables);
CHECK_ST_WARNING("Error calling vdp_video_mixer_set_feature_enables");
}
if (vc->denoise)
SET_VIDEO_ATTR(NOISE_REDUCTION_LEVEL, float, vc->denoise);
if (vc->sharpen)
SET_VIDEO_ATTR(SHARPNESS_LEVEL, float, vc->sharpen);
if (!vc->chroma_deint)
SET_VIDEO_ATTR(SKIP_CHROMA_DEINTERLACE, uint8_t, 1);
update_csc_matrix(vo);
return 0;
}
// Free everything specific to a certain video file
static void free_video_specific(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
int i;
VdpStatus vdp_st;
if (vc->decoder != VDP_INVALID_HANDLE)
vdp->decoder_destroy(vc->decoder);
vc->decoder = VDP_INVALID_HANDLE;
vc->decoder_max_refs = -1;
forget_frames(vo);
for (i = 0; i < MAX_VIDEO_SURFACES; i++) {
if (vc->surface_render[i].surface != VDP_INVALID_HANDLE) {
2009-05-09 15:08:30 +00:00
vdp_st = vdp->video_surface_destroy(vc->surface_render[i].surface);
CHECK_ST_WARNING("Error when calling vdp_video_surface_destroy");
}
vc->surface_render[i].surface = VDP_INVALID_HANDLE;
}
if (vc->video_mixer != VDP_INVALID_HANDLE) {
vdp_st = vdp->video_mixer_destroy(vc->video_mixer);
CHECK_ST_WARNING("Error when calling vdp_video_mixer_destroy");
}
vc->video_mixer = VDP_INVALID_HANDLE;
}
static int create_vdp_decoder(struct vo *vo, int max_refs)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
VdpDecoderProfile vdp_decoder_profile;
if (vc->decoder != VDP_INVALID_HANDLE)
vdp->decoder_destroy(vc->decoder);
switch (vc->image_format) {
case IMGFMT_VDPAU_MPEG1:
vdp_decoder_profile = VDP_DECODER_PROFILE_MPEG1;
break;
case IMGFMT_VDPAU_MPEG2:
vdp_decoder_profile = VDP_DECODER_PROFILE_MPEG2_MAIN;
break;
case IMGFMT_VDPAU_H264:
vdp_decoder_profile = VDP_DECODER_PROFILE_H264_HIGH;
2009-05-09 15:08:30 +00:00
mp_msg(MSGT_VO, MSGL_V, "[vdpau] Creating H264 hardware decoder "
"for %d reference frames.\n", max_refs);
break;
case IMGFMT_VDPAU_WMV3:
vdp_decoder_profile = VDP_DECODER_PROFILE_VC1_MAIN;
break;
case IMGFMT_VDPAU_VC1:
vdp_decoder_profile = VDP_DECODER_PROFILE_VC1_ADVANCED;
break;
#ifdef VDP_DECODER_PROFILE_MPEG4_PART2_ASP
case IMGFMT_VDPAU_MPEG4:
vdp_decoder_profile = VDP_DECODER_PROFILE_MPEG4_PART2_ASP;
break;
#endif
}
vdp_st = vdp->decoder_create(vc->vdp_device, vdp_decoder_profile,
2009-05-09 15:08:30 +00:00
vc->vid_width, vc->vid_height, max_refs,
&vc->decoder);
CHECK_ST_WARNING("Failed creating VDPAU decoder");
if (vdp_st != VDP_STATUS_OK) {
vc->decoder = VDP_INVALID_HANDLE;
vc->decoder_max_refs = 0;
return 0;
}
vc->decoder_max_refs = max_refs;
return 1;
}
static int initialize_vdpau_objects(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
vc->vdp_chroma_type = VDP_CHROMA_TYPE_420;
switch (vc->image_format) {
case IMGFMT_YV12:
case IMGFMT_I420:
case IMGFMT_IYUV:
vc->vdp_pixel_format = VDP_YCBCR_FORMAT_YV12;
break;
case IMGFMT_NV12:
vc->vdp_pixel_format = VDP_YCBCR_FORMAT_NV12;
break;
case IMGFMT_YUY2:
vc->vdp_pixel_format = VDP_YCBCR_FORMAT_YUYV;
vc->vdp_chroma_type = VDP_CHROMA_TYPE_422;
break;
case IMGFMT_UYVY:
vc->vdp_pixel_format = VDP_YCBCR_FORMAT_UYVY;
vc->vdp_chroma_type = VDP_CHROMA_TYPE_422;
}
if (win_x11_init_vdpau_flip_queue(vo) < 0)
return -1;
if (create_vdp_mixer(vo, vc->vdp_chroma_type) < 0)
return -1;
vdp_st = vdp->
bitmap_surface_query_capabilities(vc->vdp_device,
VDP_RGBA_FORMAT_A8,
&(VdpBool){0},
&vc->eosd_surface.max_width,
&vc->eosd_surface.max_height);
CHECK_ST_WARNING("Query to get max EOSD surface size failed");
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
forget_frames(vo);
resize(vo);
return 0;
}
static void mark_vdpau_objects_uninitialized(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
vc->decoder = VDP_INVALID_HANDLE;
for (int i = 0; i < MAX_VIDEO_SURFACES; i++)
vc->surface_render[i].surface = VDP_INVALID_HANDLE;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
forget_frames(vo);
vc->video_mixer = VDP_INVALID_HANDLE;
vc->flip_queue = VDP_INVALID_HANDLE;
vc->flip_target = VDP_INVALID_HANDLE;
for (int i = 0; i <= vc->num_output_surfaces; i++)
vc->output_surfaces[i] = VDP_INVALID_HANDLE;
vc->vdp_device = VDP_INVALID_HANDLE;
vc->eosd_surface = (struct eosd_bitmap_surface){
.surface = VDP_INVALID_HANDLE,
};
vc->output_surface_width = vc->output_surface_height = -1;
vc->eosd_render_count = 0;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->num_shown_frames = 0;
}
static int handle_preemption(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
if (!vc->is_preempted)
return 0;
if (!vc->preemption_acked)
mark_vdpau_objects_uninitialized(vo);
vc->preemption_acked = true;
if (!vc->preemption_user_notified) {
mp_tmsg(MSGT_VO, MSGL_ERR, "[vdpau] Got display preemption notice! "
"Will attempt to recover.\n");
vc->preemption_user_notified = true;
}
/* Trying to initialize seems to be quite slow, so only try once a
* second to avoid using 100% CPU. */
if (vc->last_preemption_retry_fail
&& GetTimerMS() - vc->last_preemption_retry_fail < 1000)
return -1;
if (win_x11_init_vdpau_procs(vo) < 0 || initialize_vdpau_objects(vo) < 0) {
vc->last_preemption_retry_fail = GetTimerMS() | 1;
return -1;
}
vc->last_preemption_retry_fail = 0;
vc->is_preempted = false;
vc->preemption_user_notified = false;
mp_tmsg(MSGT_VO, MSGL_INFO, "[vdpau] Recovered from display preemption.\n");
return 1;
}
/*
* connect to X server, create and map window, initialize all
* VDPAU objects, create different surfaces etc.
*/
2009-05-04 00:09:50 +00:00
static int config(struct vo *vo, uint32_t width, uint32_t height,
uint32_t d_width, uint32_t d_height, uint32_t flags,
char *title, uint32_t format)
{
struct vdpctx *vc = vo->priv;
2009-05-04 00:09:50 +00:00
struct vo_x11_state *x11 = vo->x11;
XVisualInfo vinfo;
XSetWindowAttributes xswa;
XWindowAttributes attribs;
unsigned long xswamask;
int depth;
#ifdef CONFIG_XF86VM
int vm = flags & VOFLAG_MODESWITCHING;
#endif
if (handle_preemption(vo) < 0)
return -1;
vc->flip = flags & VOFLAG_FLIPPING;
vc->image_format = format;
vc->vid_width = width;
vc->vid_height = height;
if (vc->user_colorspace == 0)
vc->colorspace = width >= 1280 || height > 576 ? 1 : 0;
else
vc->colorspace = vc->user_colorspace - 1;
free_video_specific(vo);
if (IMGFMT_IS_VDPAU(vc->image_format) && !create_vdp_decoder(vo, 2))
return -1;
#ifdef CONFIG_XF86VM
if (vm) {
vo_vm_switch(vo);
vc->mode_switched = true;
}
#endif
XGetWindowAttributes(x11->display, DefaultRootWindow(x11->display),
&attribs);
depth = attribs.depth;
if (depth != 15 && depth != 16 && depth != 24 && depth != 32)
depth = 24;
XMatchVisualInfo(x11->display, x11->screen, depth, TrueColor, &vinfo);
xswa.background_pixel = 0;
xswa.border_pixel = 0;
/* Do not use CWBackPixel: It leads to VDPAU errors after
* aspect ratio changes. */
xswamask = CWBorderPixel;
vo_x11_create_vo_window(vo, &vinfo, vo->dx, vo->dy, d_width, d_height,
flags, CopyFromParent, "vdpau", title);
XChangeWindowAttributes(x11->display, x11->window, xswamask, &xswa);
#ifdef CONFIG_XF86VM
if (vm) {
/* Grab the mouse pointer in our window */
if (vo_grabpointer)
XGrabPointer(x11->display, x11->window, True, 0,
GrabModeAsync, GrabModeAsync,
x11->window, None, CurrentTime);
XSetInputFocus(x11->display, x11->window, RevertToNone, CurrentTime);
}
#endif
if ((flags & VOFLAG_FULLSCREEN) && WinID <= 0)
vo_fs = 1;
if (initialize_vdpau_objects(vo) < 0)
return -1;
return 0;
}
2009-05-04 00:09:50 +00:00
static void check_events(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
if (handle_preemption(vo) < 0)
return;
2009-05-04 00:09:50 +00:00
int e = vo_x11_check_events(vo);
if (e & VO_EVENT_RESIZE)
2009-05-04 00:09:50 +00:00
resize(vo);
else if (e & VO_EVENT_EXPOSE && vc->paused) {
/* did we already draw a buffer */
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
if (vc->num_shown_frames) {
/* redraw the last visible buffer */
VdpStatus vdp_st;
int last_surface = WRAP_ADD(vc->surface_num, -1,
vc->num_output_surfaces);
vdp_st = vdp->presentation_queue_display(vc->flip_queue,
vc->output_surfaces[last_surface],
2009-05-09 15:08:30 +00:00
vo->dwidth, vo->dheight, 0);
CHECK_ST_WARNING("Error when calling "
"vdp_presentation_queue_display");
}
}
}
2009-05-04 00:09:50 +00:00
static void draw_osd_I8A8(void *ctx, int x0, int y0, int w, int h,
unsigned char *src, unsigned char *srca, int stride)
{
struct vo *vo = ctx;
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpOutputSurface output_surface = vc->output_surfaces[vc->surface_num];
VdpStatus vdp_st;
2009-05-09 15:08:30 +00:00
int i;
int pitch;
int index_data_size_required;
VdpRect output_indexed_rect_vid;
if (!w || !h)
return;
index_data_size_required = 2*w*h;
if (vc->index_data_size < index_data_size_required) {
2009-05-09 15:08:30 +00:00
vc->index_data = talloc_realloc_size(vc, vc->index_data,
index_data_size_required);
vc->index_data_size = index_data_size_required;
}
// index_data creation, component order - I, A, I, A, .....
for (i = 0; i < h; i++)
2009-05-09 15:08:30 +00:00
for (int j = 0; j < w; j++) {
vc->index_data[i*2*w + j*2] = src [i*stride+j];
vc->index_data[i*2*w + j*2 + 1] = -srca[i*stride+j];
}
output_indexed_rect_vid.x0 = x0;
output_indexed_rect_vid.y0 = y0;
output_indexed_rect_vid.x1 = x0 + w;
output_indexed_rect_vid.y1 = y0 + h;
pitch = w*2;
// write source_data to osd_surface.
VdpOutputSurface osd_surface = vc->output_surfaces[vc->num_output_surfaces];
2009-05-09 15:08:30 +00:00
vdp_st = vdp->
output_surface_put_bits_indexed(osd_surface, VDP_INDEXED_FORMAT_I8A8,
(const void *const*)&vc->index_data,
&pitch, &output_indexed_rect_vid,
VDP_COLOR_TABLE_FORMAT_B8G8R8X8,
(void *)vc->palette);
CHECK_ST_WARNING("Error when calling vdp_output_surface_put_bits_indexed");
VdpOutputSurfaceRenderBlendState blend_state = {
.struct_version = VDP_OUTPUT_SURFACE_RENDER_BLEND_STATE_VERSION,
.blend_factor_source_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE,
.blend_factor_source_alpha =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE,
.blend_factor_destination_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA,
.blend_factor_destination_alpha =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA,
.blend_equation_color = VDP_OUTPUT_SURFACE_RENDER_BLEND_EQUATION_ADD,
.blend_equation_alpha = VDP_OUTPUT_SURFACE_RENDER_BLEND_EQUATION_ADD,
};
vdp_st = vdp->
output_surface_render_output_surface(output_surface,
&output_indexed_rect_vid,
osd_surface,
&output_indexed_rect_vid,
NULL, &blend_state,
VDP_OUTPUT_SURFACE_RENDER_ROTATE_0);
CHECK_ST_WARNING("Error when calling "
"vdp_output_surface_render_output_surface");
}
static void draw_eosd(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
VdpOutputSurface output_surface = vc->output_surfaces[vc->surface_num];
int i;
if (handle_preemption(vo) < 0)
return;
2009-05-09 15:08:30 +00:00
VdpOutputSurfaceRenderBlendState blend_state = {
.struct_version = VDP_OUTPUT_SURFACE_RENDER_BLEND_STATE_VERSION,
.blend_factor_source_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_SRC_ALPHA,
.blend_factor_source_alpha =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE,
.blend_factor_destination_color =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA,
.blend_factor_destination_alpha =
VDP_OUTPUT_SURFACE_RENDER_BLEND_FACTOR_SRC_ALPHA,
.blend_equation_color = VDP_OUTPUT_SURFACE_RENDER_BLEND_EQUATION_ADD,
.blend_equation_alpha = VDP_OUTPUT_SURFACE_RENDER_BLEND_EQUATION_ADD,
};
for (i = 0; i < vc->eosd_render_count; i++) {
vdp_st = vdp->
output_surface_render_bitmap_surface(output_surface,
&vc->eosd_targets[i].dest,
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
vc->eosd_surface.surface,
2009-05-09 15:08:30 +00:00
&vc->eosd_targets[i].source,
&vc->eosd_targets[i].color,
&blend_state,
VDP_OUTPUT_SURFACE_RENDER_ROTATE_0);
CHECK_ST_WARNING("EOSD: Error when rendering");
}
}
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
#define HEIGHT_SORT_BITS 4
static int size_index(struct eosd_target *r)
{
unsigned int h = r->source.y1;
int n = av_log2_16bit(h);
return (n << HEIGHT_SORT_BITS)
+ (- 1 - (h << HEIGHT_SORT_BITS >> n) & (1 << HEIGHT_SORT_BITS) - 1);
}
/* Pack the given rectangles into an area of size w * h.
* The size of each rectangle is read from .source.x1/.source.y1.
* The height of each rectangle must be at least 1 and less than 65536.
* The .source rectangle is then set corresponding to the packed position.
* 'scratch' must point to work memory for num_rects+16 ints.
* Return 0 on success, -1 if the rectangles did not fit in w*h.
*
* The rectangles are placed in rows in order approximately sorted by
* height (the approximate sorting is simpler than a full one would be,
* and allows the algorithm to work in linear time). Additionally, to
* reduce wasted space when there are a few tall rectangles, empty
* lower-right parts of rows are filled recursively when the size of
* rectangles in the row drops past a power-of-two threshold. So if a
* row starts with rectangles of size 3x50, 10x40 and 5x20 then the
* free rectangle with corners (13, 20)-(w, 50) is filled recursively.
*/
static int pack_rectangles(struct eosd_target *rects, int num_rects,
int w, int h, int *scratch)
{
int bins[16 << HEIGHT_SORT_BITS];
int sizes[16 << HEIGHT_SORT_BITS] = {};
for (int i = 0; i < num_rects; i++)
sizes[size_index(rects + i)]++;
int idx = 0;
for (int i = 0; i < 16 << HEIGHT_SORT_BITS; i += 1 << HEIGHT_SORT_BITS) {
for (int j = 0; j < 1 << HEIGHT_SORT_BITS; j++) {
bins[i + j] = idx;
idx += sizes[i + j];
}
scratch[idx++] = -1;
}
for (int i = 0; i < num_rects; i++)
scratch[bins[size_index(rects + i)]++] = i;
for (int i = 0; i < 16; i++)
bins[i] = bins[i << HEIGHT_SORT_BITS] - sizes[i << HEIGHT_SORT_BITS];
struct {
int size, x, bottom;
} stack[16] = {{15, 0, h}}, s = {};
int stackpos = 1;
int y;
while (stackpos) {
y = s.bottom;
s = stack[--stackpos];
s.size++;
while (s.size--) {
int maxy = -1;
int obj;
while ((obj = scratch[bins[s.size]]) >= 0) {
int bottom = y + rects[obj].source.y1;
if (bottom > s.bottom)
break;
int right = s.x + rects[obj].source.x1;
if (right > w)
break;
bins[s.size]++;
rects[obj].source.x0 = s.x;
rects[obj].source.x1 += s.x;
rects[obj].source.y0 = y;
rects[obj].source.y1 += y;
num_rects--;
if (maxy <= 0)
stack[stackpos++] = s;
s.x = right;
maxy = FFMAX(maxy, bottom);
}
if (maxy > 0)
s.bottom = maxy;
}
}
return num_rects ? -1 : 0;
}
static void generate_eosd(struct vo *vo, mp_eosd_images_t *imgs)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
int i;
ASS_Image *img = imgs->imgs;
2009-08-29 18:21:16 +00:00
ASS_Image *p;
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
struct eosd_bitmap_surface *sfc = &vc->eosd_surface;
bool need_upload = false;
if (imgs->changed == 0)
2009-05-09 15:08:30 +00:00
return; // Nothing changed, no need to redraw
vc->eosd_render_count = 0;
2009-05-09 15:08:30 +00:00
if (!img)
2009-05-09 15:08:30 +00:00
return; // There's nothing to render!
if (imgs->changed == 1)
goto eosd_skip_upload;
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
need_upload = true;
bool reallocate = false;
while (1) {
for (p = img, i = 0; p; p = p->next) {
if (p->w <= 0 || p->h <= 0)
continue;
// Allocate new space for surface/target arrays
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
if (i >= vc->eosd_targets_size) {
vc->eosd_targets_size = FFMAX(vc->eosd_targets_size * 2, 512);
2009-05-09 15:08:30 +00:00
vc->eosd_targets =
talloc_realloc_size(vc, vc->eosd_targets,
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
vc->eosd_targets_size
2009-05-09 15:08:30 +00:00
* sizeof(*vc->eosd_targets));
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
vc->eosd_scratch =
talloc_realloc_size(vc, vc->eosd_scratch,
(vc->eosd_targets_size + 16)
* sizeof(*vc->eosd_scratch));
}
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
vc->eosd_targets[i].source.x1 = p->w;
vc->eosd_targets[i].source.y1 = p->h;
i++;
}
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
if (pack_rectangles(vc->eosd_targets, i, sfc->w, sfc->h,
vc->eosd_scratch) >= 0)
break;
int w = FFMIN(FFMAX(sfc->w * 2, EOSD_SURFACE_INITIAL_SIZE),
sfc->max_width);
int h = FFMIN(FFMAX(sfc->h * 2, EOSD_SURFACE_INITIAL_SIZE),
sfc->max_height);
if (w == sfc->w && h == sfc->h) {
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] EOSD bitmaps do not fit on "
"a surface with the maximum supported size\n");
return;
} else {
sfc->w = w;
sfc->h = h;
}
reallocate = true;
}
if (reallocate) {
if (sfc->surface != VDP_INVALID_HANDLE)
vdp->bitmap_surface_destroy(sfc->surface);
mp_msg(MSGT_VO, MSGL_V, "[vdpau] Allocating a %dx%d surface for "
"EOSD bitmaps.\n", sfc->w, sfc->h);
vdp_st = vdp->bitmap_surface_create(vc->vdp_device, VDP_RGBA_FORMAT_A8,
sfc->w, sfc->h, true,
&sfc->surface);
if (vdp_st != VDP_STATUS_OK)
sfc->surface = VDP_INVALID_HANDLE;
CHECK_ST_WARNING("EOSD: error when creating surface");
}
eosd_skip_upload:
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
if (sfc->surface == VDP_INVALID_HANDLE)
return;
2009-05-09 15:08:30 +00:00
for (p = img; p; p = p->next) {
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
if (p->w <= 0 || p->h <= 0)
continue;
2009-05-09 15:08:30 +00:00
struct eosd_target *target = &vc->eosd_targets[vc->eosd_render_count];
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
if (need_upload) {
vdp_st = vdp->
bitmap_surface_put_bits_native(sfc->surface,
(const void *) &p->bitmap,
&p->stride, &target->source);
CHECK_ST_WARNING("EOSD: putbits failed");
}
// Render dest, color, etc.
2009-05-09 15:08:30 +00:00
target->color.alpha = 1.0 - ((p->color >> 0) & 0xff) / 255.0;
target->color.blue = ((p->color >> 8) & 0xff) / 255.0;
target->color.green = ((p->color >> 16) & 0xff) / 255.0;
target->color.red = ((p->color >> 24) & 0xff) / 255.0;
target->dest.x0 = p->dst_x;
target->dest.y0 = p->dst_y;
target->dest.x1 = p->w + p->dst_x;
target->dest.y1 = p->h + p->dst_y;
vc->eosd_render_count++;
}
}
2009-05-04 00:09:50 +00:00
static void draw_osd(struct vo *vo, struct osd_state *osd)
{
struct vdpctx *vc = vo->priv;
mp_msg(MSGT_VO, MSGL_DBG2, "DRAW_OSD\n");
if (handle_preemption(vo) < 0)
return;
osd_draw_text_ext(osd, vo->dwidth, vo->dheight, vc->border_x, vc->border_y,
2009-05-09 15:08:30 +00:00
vc->border_x, vc->border_y, vc->vid_width,
vc->vid_height, draw_osd_I8A8, vo);
}
static int update_presentation_queue_status(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
2009-05-09 15:08:30 +00:00
while (vc->query_surface_num != vc->surface_num) {
VdpTime vtime;
VdpPresentationQueueStatus status;
VdpOutputSurface surface = vc->output_surfaces[vc->query_surface_num];
vdp_st = vdp->presentation_queue_query_surface_status(vc->flip_queue,
surface,
&status, &vtime);
CHECK_ST_WARNING("Error calling "
"presentation_queue_query_surface_status");
if (status == VDP_PRESENTATION_QUEUE_STATUS_QUEUED)
break;
if (vc->vsync_interval > 1) {
uint64_t qtime = vc->queue_time[vc->query_surface_num];
if (vtime < qtime + vc->vsync_interval / 2)
mp_msg(MSGT_VO, MSGL_V, "[vdpau] Frame shown too early\n");
if (vtime > qtime + vc->vsync_interval)
mp_msg(MSGT_VO, MSGL_V, "[vdpau] Frame shown late\n");
}
vc->query_surface_num = WRAP_ADD(vc->query_surface_num, 1,
vc->num_output_surfaces);
vc->recent_vsync_time = vtime;
}
int num_queued = WRAP_ADD(vc->surface_num, -vc->query_surface_num,
vc->num_output_surfaces);
mp_msg(MSGT_VO, MSGL_DBG2, "[vdpau] Queued surface count (before add): "
"%d\n", num_queued);
return num_queued;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
}
static inline uint64_t prev_vs2(struct vdpctx *vc, uint64_t ts, int shift)
{
uint64_t offset = ts - vc->recent_vsync_time;
// Fix negative values for 1<<shift vsyncs before vc->recent_vsync_time
offset += (uint64_t)vc->vsync_interval << shift;
offset %= vc->vsync_interval;
return ts - offset;
}
static void flip_page_timed(struct vo *vo, unsigned int pts_us, int duration)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
uint32_t vsync_interval = vc->vsync_interval;
if (handle_preemption(vo) < 0)
return;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
if (duration > INT_MAX / 1000)
duration = -1;
else
duration *= 1000;
if (vc->user_fps < 0)
duration = -1; // Make sure drop logic is disabled
uint64_t now = sync_vdptime(vo);
uint64_t pts = pts_us ? convert_to_vdptime(vo, pts_us) : now;
uint64_t ideal_pts = pts;
uint64_t npts = duration >= 0 ? pts + duration : UINT64_MAX;
#define PREV_VS2(ts, shift) prev_vs2(vc, ts, shift)
// Only gives accurate results for ts >= vc->recent_vsync_time
#define PREV_VSYNC(ts) PREV_VS2(ts, 0)
/* We hope to be here at least one vsync before the frame should be shown.
* If we are running late then don't drop the frame unless there is
* already one queued for the next vsync; even if we _hope_ to show the
* next frame soon enough to mean this one should be dropped we might
* not make the target time in reality. Without this check we could drop
* every frame, freezing the display completely if video lags behind.
*/
if (now > PREV_VSYNC(FFMAX(pts, vc->last_queue_time + vsync_interval)))
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
npts = UINT64_MAX;
/* Allow flipping a frame at a vsync if its presentation time is a
* bit after that vsync and the change makes the flip time delta
* from previous frame better match the target timestamp delta.
* This avoids instability with frame timestamps falling near vsyncs.
* For example if the frame timestamps were (with vsyncs at
* integer values) 0.01, 1.99, 4.01, 5.99, 8.01, ... then
* straightforward timing at next vsync would flip the frames at
* 1, 2, 5, 6, 9; this changes it to 1, 2, 4, 6, 8 and so on with
* regular 2-vsync intervals.
*
* Also allow moving the frame forward if it looks like we dropped
* the previous frame incorrectly (now that we know better after
* having final exact timestamp information for this frame) and
* there would unnecessarily be a vsync without a frame change.
*/
uint64_t vsync = PREV_VSYNC(pts);
if (pts < vsync + vsync_interval / 4
&& (vsync - PREV_VS2(vc->last_queue_time, 16)
> pts - vc->last_ideal_time + vsync_interval / 2
|| vc->dropped_frame && vsync > vc->dropped_time))
pts -= vsync_interval / 2;
vc->dropped_frame = true; // changed at end if false
vc->dropped_time = ideal_pts;
pts = FFMAX(pts, vc->last_queue_time + vsync_interval);
pts = FFMAX(pts, now);
if (npts < PREV_VSYNC(pts) + vsync_interval)
return;
int num_flips = update_presentation_queue_status(vo);
vsync = vc->recent_vsync_time + num_flips * vc->vsync_interval;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
now = sync_vdptime(vo);
pts = FFMAX(pts, now);
pts = FFMAX(pts, vsync + (vsync_interval >> 2));
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vsync = PREV_VSYNC(pts);
if (npts < vsync + vsync_interval)
return;
pts = vsync + (vsync_interval >> 2);
2009-05-09 15:08:30 +00:00
vdp_st =
vdp->presentation_queue_display(vc->flip_queue,
vc->output_surfaces[vc->surface_num],
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vo->dwidth, vo->dheight, pts);
2009-05-09 15:08:30 +00:00
CHECK_ST_WARNING("Error when calling vdp_presentation_queue_display");
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->last_queue_time = pts;
vc->queue_time[vc->surface_num] = pts;
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->last_ideal_time = ideal_pts;
vc->dropped_frame = false;
vc->surface_num = WRAP_ADD(vc->surface_num, 1, vc->num_output_surfaces);
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
vc->num_shown_frames = FFMIN(vc->num_shown_frames + 1, 1000);
}
2009-05-04 00:09:50 +00:00
static int draw_slice(struct vo *vo, uint8_t *image[], int stride[], int w,
int h, int x, int y)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
VdpStatus vdp_st;
if (handle_preemption(vo) < 0)
return VO_TRUE;
struct vdpau_render_state *rndr = (struct vdpau_render_state *)image[0];
2009-05-09 15:08:30 +00:00
int max_refs = vc->image_format == IMGFMT_VDPAU_H264 ?
rndr->info.h264.num_ref_frames : 2;
if (!IMGFMT_IS_VDPAU(vc->image_format))
return VO_FALSE;
if ((vc->decoder == VDP_INVALID_HANDLE || vc->decoder_max_refs < max_refs)
&& !create_vdp_decoder(vo, max_refs))
return VO_FALSE;
2009-05-09 15:08:30 +00:00
vdp_st = vdp->decoder_render(vc->decoder, rndr->surface,
(void *)&rndr->info,
rndr->bitstream_buffers_used,
rndr->bitstream_buffers);
CHECK_ST_WARNING("Failed VDPAU decoder rendering");
return VO_TRUE;
}
static struct vdpau_render_state *get_surface(struct vo *vo, int number)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
if (number > MAX_VIDEO_SURFACES)
return NULL;
if (vc->surface_render[number].surface == VDP_INVALID_HANDLE
&& !vc->is_preempted) {
VdpStatus vdp_st;
vdp_st = vdp->video_surface_create(vc->vdp_device, vc->vdp_chroma_type,
2009-05-09 15:08:30 +00:00
vc->vid_width, vc->vid_height,
&vc->surface_render[number].surface);
CHECK_ST_WARNING("Error when calling vdp_video_surface_create");
}
2009-05-09 15:08:30 +00:00
mp_msg(MSGT_VO, MSGL_DBG2, "VID CREATE: %u\n",
vc->surface_render[number].surface);
return &vc->surface_render[number];
}
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
static void draw_image(struct vo *vo, mp_image_t *mpi, double pts)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
struct mp_image *reserved_mpi = NULL;
struct vdpau_render_state *rndr;
if (vc->is_preempted) {
vo->frame_loaded = true;
return;
}
if (IMGFMT_IS_VDPAU(vc->image_format)) {
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
rndr = mpi->priv;
reserved_mpi = mpi;
} else if (!(mpi->flags & MP_IMGFLAG_DRAW_CALLBACK)) {
VdpStatus vdp_st;
void *destdata[3] = {mpi->planes[0], mpi->planes[2], mpi->planes[1]};
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
rndr = get_surface(vo, vc->deint_counter);
vc->deint_counter = WRAP_ADD(vc->deint_counter, 1, NUM_BUFFERED_VIDEO);
if (vc->image_format == IMGFMT_NV12)
destdata[1] = destdata[2];
2009-05-09 15:08:30 +00:00
vdp_st =
vdp->video_surface_put_bits_y_cb_cr(rndr->surface,
vc->vdp_pixel_format,
(const void *const*)destdata,
mpi->stride); // pitch
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
CHECK_ST_WARNING("Error when calling "
2009-05-09 15:08:30 +00:00
"vdp_video_surface_put_bits_y_cb_cr");
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
} else
// We don't support slice callbacks so this shouldn't occur -
// I think the flags test above in pointless, but I'm adding
// this instead of removing it just in case.
abort();
if (mpi->fields & MP_IMGFIELD_ORDERED)
vc->top_field_first = !!(mpi->fields & MP_IMGFIELD_TOP_FIRST);
else
vc->top_field_first = 1;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
add_new_video_surface(vo, rndr->surface, mpi, pts);
return;
}
static uint32_t get_image(struct vo *vo, mp_image_t *mpi)
{
struct vdpctx *vc = vo->priv;
struct vdpau_render_state *rndr;
// no dr for non-decoding for now
2009-05-09 15:08:30 +00:00
if (!IMGFMT_IS_VDPAU(vc->image_format))
return VO_FALSE;
if (mpi->type != MP_IMGTYPE_NUMBERED)
return VO_FALSE;
rndr = get_surface(vo, mpi->number);
if (!rndr) {
2009-05-09 15:08:30 +00:00
mp_msg(MSGT_VO, MSGL_ERR, "[vdpau] no surfaces available in "
"get_image\n");
// TODO: this probably breaks things forever, provide a dummy buffer?
return VO_FALSE;
}
mpi->flags |= MP_IMGFLAG_DIRECT;
mpi->stride[0] = mpi->stride[1] = mpi->stride[2] = 0;
mpi->planes[0] = mpi->planes[1] = mpi->planes[2] = NULL;
// hack to get around a check and to avoid a special-case in vd_ffmpeg.c
mpi->planes[0] = (void *)rndr;
mpi->num_planes = 1;
mpi->priv = rndr;
return VO_TRUE;
}
static int query_format(uint32_t format)
{
2009-05-09 15:08:30 +00:00
int default_flags = VFCAP_CSP_SUPPORTED | VFCAP_CSP_SUPPORTED_BY_HW
| VFCAP_HWSCALE_UP | VFCAP_HWSCALE_DOWN | VFCAP_OSD | VFCAP_EOSD
| VFCAP_EOSD_UNSCALED | VFCAP_FLIP;
switch (format) {
case IMGFMT_YV12:
case IMGFMT_I420:
case IMGFMT_IYUV:
case IMGFMT_NV12:
case IMGFMT_YUY2:
case IMGFMT_UYVY:
return default_flags | VOCAP_NOSLICES;
case IMGFMT_VDPAU_MPEG1:
case IMGFMT_VDPAU_MPEG2:
case IMGFMT_VDPAU_H264:
case IMGFMT_VDPAU_WMV3:
case IMGFMT_VDPAU_VC1:
case IMGFMT_VDPAU_MPEG4:
return default_flags;
}
return 0;
}
static void destroy_vdpau_objects(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
int i;
VdpStatus vdp_st;
free_video_specific(vo);
if (vc->flip_queue != VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_destroy(vc->flip_queue);
2009-05-09 15:08:30 +00:00
CHECK_ST_WARNING("Error when calling vdp_presentation_queue_destroy");
}
if (vc->flip_target != VDP_INVALID_HANDLE) {
vdp_st = vdp->presentation_queue_target_destroy(vc->flip_target);
2009-05-09 15:08:30 +00:00
CHECK_ST_WARNING("Error when calling "
"vdp_presentation_queue_target_destroy");
}
for (i = 0; i <= vc->num_output_surfaces; i++) {
if (vc->output_surfaces[i] == VDP_INVALID_HANDLE)
continue;
vdp_st = vdp->output_surface_destroy(vc->output_surfaces[i]);
2009-05-09 15:08:30 +00:00
CHECK_ST_WARNING("Error when calling vdp_output_surface_destroy");
}
vo_vdpau: Allocate one large surface for EOSD content Create a single large bitmap surface for EOSD objects and pack all the bitmap rectangles inside that. The old code created a separate bitmap surface for every bitmap and then resized the cached surfaces when drawing later frames. The number of surfaces could be large (at least about 2000 for one sample subtitle script) so this was very inefficient. The old code also used a very simple strategy for pairing existing surfaces to new bitmaps; it could resize tiny surfaces to hold large glyphs while using existing large surfaces to hold tiny glyphs and as a result allocate arbitrarily much more total surface area than was necessary. The new code only supports using a single surface, freeing it and allocating a larger one if necessary. It would be possible to support multiple surfaces in case of hitting the maximum bitmap surface size, but I'll wait to see if that is actually needed before implementing it. NVIDIA seems to support bitmap surface sizes up to 8192x8192, so it would take either a really pathological subtitle script rendered at a high resolution or an implementation with lower limits before multiple surfaces would be necessary. The packing algorithm should successfully pack the bitmaps into a surface of size w*h as long as the total area of the bitmaps does not exceed 16/17 (w-max_bitmap_width)*(h-max_bitmap_height), so there should be no totally catastrophic failure cases. The 16/17 factor comes from approximate sorting used in the algorithm. On average performance should be better than this minimum guaranteed level.
2009-09-02 17:21:24 +00:00
if (vc->eosd_surface.surface != VDP_INVALID_HANDLE) {
vdp_st = vdp->bitmap_surface_destroy(vc->eosd_surface.surface);
2009-05-09 15:08:30 +00:00
CHECK_ST_WARNING("Error when calling vdp_bitmap_surface_destroy");
}
2009-05-08 18:48:01 +00:00
vdp_st = vdp->device_destroy(vc->vdp_device);
CHECK_ST_WARNING("Error when calling vdp_device_destroy");
}
2009-05-04 00:09:50 +00:00
static void uninit(struct vo *vo)
{
struct vdpctx *vc = vo->priv;
/* Destroy all vdpau objects */
destroy_vdpau_objects(vo);
#ifdef CONFIG_XF86VM
2009-05-08 18:48:01 +00:00
if (vc->mode_switched)
vo_vm_close(vo);
#endif
2009-05-04 00:09:50 +00:00
vo_x11_uninit(vo);
// Free bitstream buffers allocated by FFmpeg
for (int i = 0; i < MAX_VIDEO_SURFACES; i++)
av_freep(&vc->surface_render[i].bitstream_buffers);
}
2009-05-04 00:09:50 +00:00
static int preinit(struct vo *vo, const char *arg)
{
int i;
struct vdpctx *vc = talloc_zero(vo, struct vdpctx);
vo->priv = vc;
2009-05-08 18:48:01 +00:00
// Mark everything as invalid first so uninit() can tell what has been
// allocated
mark_vdpau_objects_uninitialized(vo);
2009-05-08 18:48:01 +00:00
vc->deint_type = 3;
vc->chroma_deint = 1;
vc->user_colorspace = 1;
vc->flip_offset_window = 50;
vc->flip_offset_fs = 50;
vc->num_output_surfaces = 3;
const opt_t subopts[] = {
{"deint", OPT_ARG_INT, &vc->deint, (opt_test_f)int_non_neg},
{"chroma-deint", OPT_ARG_BOOL, &vc->chroma_deint, NULL},
{"pullup", OPT_ARG_BOOL, &vc->pullup, NULL},
{"denoise", OPT_ARG_FLOAT, &vc->denoise, NULL},
{"sharpen", OPT_ARG_FLOAT, &vc->sharpen, NULL},
{"colorspace", OPT_ARG_INT, &vc->user_colorspace, NULL},
{"studio", OPT_ARG_BOOL, &vc->studio_levels, NULL},
{"hqscaling", OPT_ARG_INT, &vc->hqscaling, NULL},
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
{"fps", OPT_ARG_FLOAT, &vc->user_fps, NULL},
{"queuetime_windowed", OPT_ARG_INT, &vc->flip_offset_window, NULL},
{"queuetime_fs", OPT_ARG_INT, &vc->flip_offset_fs, NULL},
{"output_surfaces", OPT_ARG_INT, &vc->num_output_surfaces, NULL},
{NULL}
};
if (subopt_parse(arg, subopts) != 0) {
mp_msg(MSGT_VO, MSGL_FATAL, "[vdpau] Could not parse suboptions.\n");
return -1;
}
if (vc->hqscaling < 0 || vc->hqscaling > 9) {
mp_msg(MSGT_VO, MSGL_FATAL, "[vdpau] Invalid value for suboption "
"hqscaling\n");
return -1;
}
if (vc->num_output_surfaces < 2) {
mp_msg(MSGT_VO, MSGL_FATAL, "[vdpau] Invalid suboption "
"output_surfaces: can't use less than 2 surfaces\n");
return -1;
}
if (vc->num_output_surfaces > MAX_OUTPUT_SURFACES) {
mp_msg(MSGT_VO, MSGL_WARN, "[vdpau] Number of output surfaces "
"is limited to %d.\n", MAX_OUTPUT_SURFACES);
vc->num_output_surfaces = MAX_OUTPUT_SURFACES;
}
if (vc->deint)
vc->deint_type = vc->deint;
if (!vo_init(vo))
return -1;
2009-05-08 18:48:01 +00:00
// After this calling uninit() should work to free resources
if (win_x11_init_vdpau_procs(vo) < 0) {
if (vc->vdp->device_destroy)
vc->vdp->device_destroy(vc->vdp_device);
vo_x11_uninit(vo);
return -1;
}
// full grayscale palette.
for (i = 0; i < PALETTE_SIZE; ++i)
vc->palette[i] = (i << 16) | (i << 8) | i;
vc->procamp.struct_version = VDP_PROCAMP_VERSION;
vc->procamp.brightness = 0.0;
vc->procamp.contrast = 1.0;
vc->procamp.saturation = 1.0;
vc->procamp.hue = 0.0;
return 0;
}
static int get_equalizer(struct vo *vo, const char *name, int *value)
{
struct vdpctx *vc = vo->priv;
if (!strcasecmp(name, "brightness"))
*value = vc->procamp.brightness * 100;
else if (!strcasecmp(name, "contrast"))
2009-05-09 15:08:30 +00:00
*value = (vc->procamp.contrast - 1.0) * 100;
else if (!strcasecmp(name, "saturation"))
2009-05-09 15:08:30 +00:00
*value = (vc->procamp.saturation - 1.0) * 100;
else if (!strcasecmp(name, "hue"))
*value = vc->procamp.hue * 100 / M_PI;
else
return VO_NOTIMPL;
return VO_TRUE;
}
static int set_equalizer(struct vo *vo, const char *name, int value)
{
struct vdpctx *vc = vo->priv;
if (!strcasecmp(name, "brightness"))
vc->procamp.brightness = value / 100.0;
else if (!strcasecmp(name, "contrast"))
vc->procamp.contrast = value / 100.0 + 1.0;
else if (!strcasecmp(name, "saturation"))
vc->procamp.saturation = value / 100.0 + 1.0;
else if (!strcasecmp(name, "hue"))
vc->procamp.hue = value / 100.0 * M_PI;
else
return VO_NOTIMPL;
update_csc_matrix(vo);
return true;
}
2009-05-04 00:09:50 +00:00
static int control(struct vo *vo, uint32_t request, void *data)
{
struct vdpctx *vc = vo->priv;
struct vdp_functions *vdp = vc->vdp;
handle_preemption(vo);
switch (request) {
case VOCTRL_GET_DEINTERLACE:
*(int*)data = vc->deint;
return VO_TRUE;
case VOCTRL_SET_DEINTERLACE:
vc->deint = *(int*)data;
if (vc->deint)
vc->deint = vc->deint_type;
if (vc->deint_type > 2) {
VdpStatus vdp_st;
VdpVideoMixerFeature features[1] =
{vc->deint_type == 3 ?
VDP_VIDEO_MIXER_FEATURE_DEINTERLACE_TEMPORAL :
VDP_VIDEO_MIXER_FEATURE_DEINTERLACE_TEMPORAL_SPATIAL};
VdpBool feature_enables[1] = {vc->deint ? VDP_TRUE : VDP_FALSE};
vdp_st = vdp->video_mixer_set_feature_enables(vc->video_mixer,
1, features,
feature_enables);
CHECK_ST_WARNING("Error changing deinterlacing settings");
}
return VO_TRUE;
case VOCTRL_PAUSE:
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
if (vc->dropped_frame)
flip_page_timed(vo, 0, -1);
return (vc->paused = true);
case VOCTRL_RESUME:
return (vc->paused = false);
case VOCTRL_QUERY_FORMAT:
return query_format(*(uint32_t *)data);
case VOCTRL_GET_IMAGE:
return get_image(vo, data);
case VOCTRL_DRAW_IMAGE:
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
abort(); // draw_image() should get called directly
case VOCTRL_BORDER:
vo_x11_border(vo);
resize(vo);
return VO_TRUE;
case VOCTRL_FULLSCREEN:
vo_x11_fullscreen(vo);
resize(vo);
return VO_TRUE;
case VOCTRL_GET_PANSCAN:
return VO_TRUE;
case VOCTRL_SET_PANSCAN:
resize(vo);
return VO_TRUE;
case VOCTRL_SET_EQUALIZER: {
struct voctrl_set_equalizer_args *args = data;
return set_equalizer(vo, args->name, args->value);
}
case VOCTRL_GET_EQUALIZER: {
struct voctrl_get_equalizer_args *args = data;
return get_equalizer(vo, args->name, args->valueptr);
}
case VOCTRL_SET_YUV_COLORSPACE:
vc->colorspace = *(int *)data % 3;
update_csc_matrix(vo);
return true;
case VOCTRL_GET_YUV_COLORSPACE:
*(int *)data = vc->colorspace;
return true;
case VOCTRL_ONTOP:
vo_x11_ontop(vo);
return VO_TRUE;
case VOCTRL_UPDATE_SCREENINFO:
update_xinerama_info(vo);
return VO_TRUE;
case VOCTRL_DRAW_EOSD:
if (!data)
return VO_FALSE;
generate_eosd(vo, data);
draw_eosd(vo);
return VO_TRUE;
case VOCTRL_GET_EOSD_RES: {
mp_eosd_res_t *r = data;
r->w = vo->dwidth;
r->h = vo->dheight;
r->ml = r->mr = vc->border_x;
r->mt = r->mb = vc->border_y;
return VO_TRUE;
}
case VOCTRL_REDRAW_OSD:
video_to_output_surface(vo);
draw_eosd(vo);
draw_osd(vo, data);
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
flip_page_timed(vo, 0, -1);
return true;
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
case VOCTRL_RESET:
forget_frames(vo);
return true;
}
return VO_NOTIMPL;
}
2009-05-04 00:09:50 +00:00
const struct vo_driver video_out_vdpau = {
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
.is_new = true,
.buffer_frames = true,
2009-05-06 19:21:19 +00:00
.info = &(const struct vo_info_s){
2009-05-04 00:09:50 +00:00
"VDPAU with X11",
"vdpau",
"Rajib Mahapatra <rmahapatra@nvidia.com> and others",
""
},
.preinit = preinit,
.config = config,
.control = control,
core/VO: Allow VO drivers to add/modify frames Add interfaces to allow VO drivers to add or remove frames from the video stream and to alter timestamps. Currently this functionality only works with in correct-pts mode. Use the new functionality in vo_vdpau to properly support frame-adding deinterlace modes. Frames added by the VDPAU deinterlacing code are now properly timed. Before every second frame was always shown immediately (probably next monitor refresh) after the previous one, even if you were watching things in slow motion, and framestepping didn't stop at them at all. When seeking the deinterlace algorithm is no longer fed a mix of frames from old and new positions. As a side effect of the changes a problem with resize events was also fixed. Resizing calls video_to_output_surface() to render the frame at the new resolution, but before this function also changed the list of history frames, so resizing could give an image different from the original one, and also corrupt next frames due to them seeing the wrong history. Now the function has no such side effects. There are more resize-related problems though that will be fixed in a later commit. The deint_mpi[] list of reserved frames is increased from 2 to 3 entries for reasons related to the above. Having 2 entries is enough when you initially get a new frame in draw_image() because then you'll have those two entries plus the new one for a total of 3 (the code relied on the oldest mpi implicitly staying reserved for the duration of the call even after usage count was decreased). However if you want to be able to reproduce the rendering outside draw_image(), relying on the explicitly reserved list only, then it needs to store 3 entries.
2009-09-18 13:27:55 +00:00
.draw_image = draw_image,
.get_buffered_frame = get_buffered_frame,
2009-05-04 00:09:50 +00:00
.draw_slice = draw_slice,
.draw_osd = draw_osd,
Implement vsync-aware frame timing for VDPAU Main things added are custom frame dropping for VDPAU to work around the display FPS limit, frame timing adjustment to avoid jitter when video frame times keep falling near vsyncs, and use of VDPAU's timing feature to keep one future frame queued in advance. NVIDIA's VDPAU implementation refuses to change the displayed frame more than once per vsync. This set a limit on how much video could be sped up, and caused problems for nearly all videos on low-FPS video projectors (playing 24 FPS video on a 24 FPS projector would not work reliably as MPlayer may need to slightly speed up the video for AV sync). This commit adds a framedrop mechanism that drops some frames so that no more than one is sent for display per vsync. The code tries to select the dropped frames smartly, selecting the best one to show for each vsync. Because of the timing features needed the drop functionality currently does not work if the correct-pts option is disabled. The code also adjusts frame timing slightly to avoid jitter. If you for example play 24 FPS video content on a 72 FPS display then normally a frame would be shown for 3 vsyncs, but if the frame times happen to fall near vsyncs and change between just before and just after then there could be frames alternating between 2 and 4 vsyncs. The code changes frame timing by up to one quarter vsync interval to avoid this. The above functionality depends on having reliable vsync timing information available. The display refresh rate is not directly provided by the VDPAU API. The current code uses information from the XF86VidMode extension if available; I'm not sure how common cases where that is inaccurate are. The refresh rate can be specified manually if necessary. After the changes in this commit MPlayer now always tries to keep one frame queued for future display using VDPAU's internal timing mechanism (however no more than 50 ms to the future). This should make video playback somewhat more robust against timing inaccuracies caused by system load.
2009-11-15 02:39:22 +00:00
.flip_page_timed = flip_page_timed,
2009-05-04 00:09:50 +00:00
.check_events = check_events,
.uninit = uninit,
};