Commit Graph

75237 Commits

Author SHA1 Message Date
Rostislav Pehlivanov 3381d92671 aacenc_tns: readjust values for new TNS decision making
Since TNS was fixed with the recent commits retweak the values
so it's more frequently used.
Still not enabled by default yet, though it's possible that it
will be made enabled by default in the near future.

Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2015-09-12 13:15:02 +01:00
Rostislav Pehlivanov 7b7866387b aacenc_tns: encode coefficients directly and reenable compression
This commit was made possible with the earlier commits since the
new quantization method basically means we're working always with
unsigned values. The specifications mention to use compression when
the first 2 bits are identical but they didn't mention if this should
happen before or after the conversion to signed values. Actually
they said nothing about conversion to signed values.

With this commit, coefficient compression usually always happens
which saves a lot of space, especially at extremely low bitrates
and doesn't change the quality at all.

Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2015-09-12 13:10:28 +01:00
Rostislav Pehlivanov a83a8d7068 aacenc_tns: redo coefficient quantization and decision making
This finally (and again) gets rid of basically everything the
specifications say about how TNS should be done. The main
problem used to be that a single filter was used for all
coefficients which despite being explicitly recommended by
the specifications usually sounds wrong, therefore it's
a corner case in the current TNS implementation.

This commit also changes the coefficient bit size, as apparently
it's better to use lower precision in case the windows are eight
short. This is apparently what fdk_aac uses, looking at the bit
stream and makes sense. Also the order when 8 SHORT windows happen
is important as 7 was too much and according to PSNR was worse
while 5 is just about correct.

Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2015-09-12 13:04:27 +01:00
Hendrik Leppkes 33be39efe3 Merge commit '1e0b8bf0b3b3b4247fb21e9839af342ae879607c'
* commit '1e0b8bf0b3b3b4247fb21e9839af342ae879607c':
  travis: fix dependencies

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:31:22 +02:00
Hendrik Leppkes e75b2e9c4b Merge commit '99404597201911de90cff2ef85f2d44176d39147'
* commit '99404597201911de90cff2ef85f2d44176d39147':
  mmaldec: fix pkt_dts determination

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:30:41 +02:00
Hendrik Leppkes 264ff3dd2e Merge commit '87a051f97633010f71dfc1d23d806856499bf231'
* commit '87a051f97633010f71dfc1d23d806856499bf231':
  lavc: allow asynchronous decoders to return correct pkt_dts values

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:30:33 +02:00
Hendrik Leppkes 30fb54c23f Merge commit 'b7ab6e18eecad43593ad2a0e9fc9eba7f24751cb'
* commit 'b7ab6e18eecad43593ad2a0e9fc9eba7f24751cb':
  mmaldec: disable timestamp interpolation

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:29:29 +02:00
Hendrik Leppkes 45ae299785 Merge commit '6b652c0273d79f2e0c52ad91450bd0737cf3c8a6'
* commit '6b652c0273d79f2e0c52ad91450bd0737cf3c8a6':
  mmaldec: fix problems with flush logic

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:29:16 +02:00
Hendrik Leppkes 886f0f5ff1 Merge commit 'b84675d63aaede8f6944b901250a10456c5477e6'
* commit 'b84675d63aaede8f6944b901250a10456c5477e6':
  mmaldec: hack against buffering problems on broken input

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:29:10 +02:00
Hendrik Leppkes 84d04a0dfa Merge commit '5788623d29c3e806a7879210986110aced758dc2'
* commit '5788623d29c3e806a7879210986110aced758dc2':
  jpeg2000: Split codeblock decoding from the main tile decoding

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:25:38 +02:00
Hendrik Leppkes 6e611a1839 Merge commit 'db53a2306f62f05faa67e6f3c60ee55a9b8e4776'
* commit 'db53a2306f62f05faa67e6f3c60ee55a9b8e4776':
  jpeg2000: Do not warn about known and skippable markers

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:16:13 +02:00
Hendrik Leppkes c074671621 Merge commit '9b5a4a9cce3042558e107ae1ed30d9bf3d867a35'
* commit '9b5a4a9cce3042558e107ae1ed30d9bf3d867a35':
  mmvideo: Make sure the rle does not write over the frame boundaries

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:14:26 +02:00
Hendrik Leppkes 09c15eac3e Merge commit '41ed749fe987e60b0485fa721ad869590651324d'
* commit '41ed749fe987e60b0485fa721ad869590651324d':
  ogg: Do not try to use the parser if it is not present

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:05:01 +02:00
Hendrik Leppkes eadf6cb2c4 Merge commit '7b02cb29d9d60cdd5ef321043d11d02023e7dc8f'
* commit '7b02cb29d9d60cdd5ef321043d11d02023e7dc8f':
  pixdesc: Document the component order

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:03:04 +02:00
Ronald S. Bultje a30a8beeb3 vp9: Fix emu[] edge overflow conditions for >8bpp/non-420. 2015-09-12 07:01:48 -04:00
Ronald S. Bultje 2563a33856 vp9: re-initialize internal buffers on bpp change also. 2015-09-12 07:01:47 -04:00
Hendrik Leppkes 6210a64822 Merge commit 'c7ed26ad6035793c7212c17545b0ded18b72db69'
* commit 'c7ed26ad6035793c7212c17545b0ded18b72db69':
  pixdesc: Add missing alpha flag for yuva420p9be

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 13:00:31 +02:00
Hendrik Leppkes ba42096d9a Merge commit 'e336c51e6ffcdb93fbcf3c6153d378400608526b'
* commit 'e336c51e6ffcdb93fbcf3c6153d378400608526b':
  pixdesc: Consistently order components

Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
2015-09-12 12:54:25 +02:00
James Almer 1e0b8bf0b3 travis: fix dependencies
bc hasn't been needed since a982c5d74f

Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-12 12:29:27 +02:00
wm4 9940459720 mmaldec: fix pkt_dts determination
This also drops setting the frame->pts field. This is usually not set by
decoders, so this would be an inconsistency that's at worst a danger to
the API user.

It appears the buffer->dts field is normally not set by the MMAL
decoder, so don't use it. If it's ever going to be set by MMAL, we
don't know whether the value will be what we want.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-12 12:27:34 +02:00
wm4 87a051f976 lavc: allow asynchronous decoders to return correct pkt_dts values
The generic code in utils.c sets the AVFrame.pkt_dts field from the
packet it was supposedly decoded. This does not have to be true for a
fully asynchronous decoder like mmaldec. It could be overwritten with an
incorrect value. Even if the decoder doesn't determine the DTS (but sets
it to AV_NOPTS_VALUE), it's impossible to determine a correct value in
utils.c.

Decoders can now be marked with FF_CODEC_CAP_SETS_PKT_DTS, in which case
utils.c won't overwrite the field. The decoders are expected to set this
field (even if they only set it to AV_NOPTS_VALUE).

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-12 12:27:19 +02:00
wm4 b7ab6e18ee mmaldec: disable timestamp interpolation
This MMAL feature fills in missing timestamps from the framerate set on
the input port. This is generally unwanted, since libavcodec decoders
merely pass through timestamps without ever "fixing" them. The framerate
is also unknown, and even the timebase doesn't have to be set.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-12 12:25:49 +02:00
wm4 6b652c0273 mmaldec: fix problems with flush logic
Don't try to do a blocking wait for MMAL output if we haven't even sent
a single real packet, but only flush packets. Obviously we can't expect
to get anything back.

Additionally, don't send a flush packet to MMAL in the same case. It
appears the MMAL decoder will sometimes hang in mmal_vc_port_disable()
(called from ffmmal_close_decoder()), waiting for a reply from the GPU
which never arrives. Either MMAL disallows sending flush packets without
preceding real data, or it's a MMAL bug.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-12 12:25:39 +02:00
wm4 b84675d63a mmaldec: hack against buffering problems on broken input
I can't come up with a nice way to handle this. It's hard to keep the
lock-stepped input/output in this case. You can't predict whether the
MMAL decoder will output a picture (because it's asynchronous), so
you have to assume in general that any packet could produce 0 or 1
frames. You can't continue to write input packets to the decoder,
because then you might get too many output frames, which you can't
get rid of because the lavc decoding API does not allow the decoder
to return an output frame without consuming an input frame (except
when flushing).

The ideal fix is a M:N decoding API (preferably asynchronous), which
would make this code potentially much cleaner. For now, this hack
will do.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-09-12 12:25:23 +02:00
James Almer d5f8a642f6 x86: port PSIGNW to cpuflags
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
2015-09-11 23:27:03 -03:00
Reynaldo H. Verdejo Pinochet 314bc20d7a ffserver: remove redundant comment, clarify another one
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
2015-09-11 18:33:29 -07:00
Reynaldo H. Verdejo Pinochet 2580395e1c ffserver: unify exit path in http_server()
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
2015-09-11 18:33:13 -07:00
Reynaldo H. Verdejo Pinochet 9a168e9371 ffserver: unify fail path in socket_open_listen()
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
2015-09-11 18:08:08 -07:00
Ronald S. Bultje 4b66274a86 vp9: save one (PSIGNW) instruction in iadst16_1d sse2/ssse3. 2015-09-11 20:36:51 -04:00
Simon Thelen b84232694e lavf/webvttenc: Require webvtt file to contain exactly one WebVTT stream.
Not requiring this can end up producing hilariously broken files
together with -c:s copy (e.g. a webvtt file containing binary subtitle data).

Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-12 02:17:41 +02:00
Ronald S. Bultje 02064d6b7b libvpxdec: apply RGB to 444P16 instead of 422P16. 2015-09-11 19:35:22 -04:00
Alex Agranovsky 9b10ae5727 avformat/format: Remove parameters from mime type before comparission for probing
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-12 00:42:18 +02:00
James Almer b8e4df46ab configure: check for ID3D11VideoContext
Should fix compilation with mingw-w64 trunk, where ID3D11VideoDecoder is available
but ID3D11VideoContext still isn't.

Signed-off-by: James Almer <jamrial@gmail.com>
2015-09-11 18:23:30 -03:00
Alexander S. Drozdov 6a8d58d693 avformat/tcp: TCP Protocol: fix descriptor leak on listen and interrupt
If we try to listen on TCP port and ff_listen() fails on
interrupt callback socket (bind) descriptor overwrites and
does not closed at all.

As a result, we can't rebind to the same port.

Reviewed-by: Stephan Holljes <klaxa1337@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 21:44:30 +02:00
Thierry Foucu f600381b79 libavformat/utils.c: use correct variable for message.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 21:25:33 +02:00
Michael Niedermayer 0ae40c5a70 swscale/swscale: Fix "unused variable" warning
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 20:59:32 +02:00
Rostislav Pehlivanov 8180b113e1 aaccoder: respect cutoff when marking bands as PNS
Makes more sense as users usually set the -cutoff option
to low pass filter the signal. The encoder will still over
shoot slightly when encoding normal coefficients however
that's normal.

Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2015-09-11 18:59:15 +01:00
Luca Barbato 5788623d29 jpeg2000: Split codeblock decoding from the main tile decoding
That loop is completely stand-alone.
2015-09-11 18:19:39 +02:00
Luca Barbato db53a2306f jpeg2000: Do not warn about known and skippable markers
Matches the openjpeg behaviour.
2015-09-11 18:19:01 +02:00
Luca Barbato 9b5a4a9cce mmvideo: Make sure the rle does not write over the frame boundaries
Bug-Id: 887
CC: libav-stable@libav.org
2015-09-11 18:19:00 +02:00
Paul B Mahol abef6383fb avformat/wavdec: use AV_OPT_TYPE_BOOL for ignore_length
Signed-off-by: Paul B Mahol <onemda@gmail.com>
2015-09-11 15:41:18 +00:00
Paul B Mahol 2506244155 avformat/wavenc: use AV_OPT_TYPE_BOOL for write_bext option
Signed-off-by: Paul B Mahol <onemda@gmail.com>
2015-09-11 15:34:17 +00:00
Michael Niedermayer 8b72f6d50b avcodec/ljpegenc: Fix encoding RGBA LJPEG
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 13:45:29 +02:00
Michael Niedermayer 055e56e9f7 avcodec/mjpegdec: Fix decoding RGBA RCT LJPEG
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 13:42:05 +02:00
Ganesh Ajjanagadde 07d33439f3 configure: colorize error messages
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 12:57:14 +02:00
Carl Eugen Hoyos 85a7ff8c27 lavc: Fix standalone compilation of the subrip decoder. 2015-09-11 12:39:29 +02:00
Agatha Hu 81071eea7d avcodec/nvenc: change flag of cuCtxCreate to avoid CPU spins
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
2015-09-11 10:11:29 +02:00
Michael Niedermayer f58e011a1f avformat/utils: Increase default max_stream_analyze_duration for flv
Fixes: unknown_video.flv

Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 01:12:28 +02:00
Michael Niedermayer 77d03b0ebb avutil/version: Bump for avpriv_get_trc_function_from_trc() and AVCOL_PRI/TRC_SMPTEST428_1 and AVCOL_TRC_SMPTEST2084
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2015-09-11 01:12:28 +02:00
Lou Logan 98ecee2d3d doc/filters: fix Photoshop curves file extension
Found-by: moorej
Signed-off-by: Lou Logan <lou@lrcd.com>
2015-09-10 14:13:23 -08:00