openwrt

OpenWRT branches i work with

Go to file

Luka Perkov f7f117b88d imx6: optimize for NEON FPU hardware The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware blocks. This will tune gcc to use neon instead of vfpv3 which will outperform VFPv3. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39760		2014-02-27 22:41:40 +00:00
config	config: lxc: enable KERNEL_POSIX_MQUEUE	2014-01-24 13:49:39 +00:00
docs
include	build: allow packages to declare ABI versions to detect necessary package rebuilds	2014-02-23 17:32:04 +00:00
package	ath5k: fix enabling 5/10 mhz channel bandwidth support	2014-02-27 21:36:28 +00:00
scripts	scripts/kconfig.pl: Indicate which file we couldn't open	2014-01-19 17:27:04 +00:00
target	imx6: optimize for NEON FPU hardware	2014-02-27 22:41:40 +00:00
toolchain	musl: move the dependency on BROKEN to the right config symbol	2014-02-26 12:13:02 +00:00
tools	cmake: upgrade to 2.8.12.2	2014-02-16 21:51:10 +00:00
.gitattributes
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds: disable the x-wrt feed, it is unmaintained	2014-02-03 14:29:04 +00:00
LICENSE
Makefile
README
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org