openwrt

OpenWRT branches i work with

Go to file

Felix Fietkau f4e6418a32 ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared by the function ath79_setup_ar934x_eth_cfg. Clearing these in the ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they rely on the preset value by the bootloader. Instead another function is introduced which also works on ETH_CFG on AR934x. It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on machines which require special settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45523		2015-04-20 15:00:52 +00:00
config	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
docs	docs: Fix typo buysbox -> busybox.	2015-04-09 10:32:26 +00:00
include	all: replace genext2fs with make_ext4fs	2015-04-20 13:57:43 +00:00
package	mac80211: fallback to wpa_supplicant to setup encrypted mesh	2015-04-20 15:00:13 +00:00
scripts	scripts/ipkg: remove file, it is obsolete	2015-03-29 07:35:36 +00:00
target	ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x	2015-04-20 15:00:52 +00:00
toolchain	uClibc: backport sync_file_range fixes (closes: #19350 )	2015-04-02 23:21:30 +00:00
tools	tools: drop unused genext2fs	2015-04-20 13:58:22 +00:00
.gitattributes
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE
Makefile	build: clean up sitefiles, make them per-arch	2015-03-28 13:38:34 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org