openwrt/target/linux/generic/patches-3.10/771-bgmac-pending.patch
Hauke Mehrtens bc3d934148 kernel: bgmac: update patches
This updates the bgmac backport patch to the current upstream version
and adds some more patches mostly for BCM4707.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39165
2013-12-26 23:22:31 +00:00

79 lines
2.9 KiB
Diff

--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -725,11 +725,9 @@ static void bgmac_phy_reset(struct bgmac
if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
return;
- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
- BGMAC_PHY_CTL_RESET);
+ bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET);
udelay(100);
- if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
- BGMAC_PHY_CTL_RESET)
+ if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET)
bgmac_err(bgmac, "PHY reset failed\n");
bgmac_phy_init(bgmac);
}
@@ -1200,27 +1198,11 @@ static int bgmac_set_mac_address(struct
static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
{
struct bgmac *bgmac = netdev_priv(net_dev);
- struct mii_ioctl_data *data = if_mii(ifr);
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = bgmac->phyaddr;
- /* fallthru */
- case SIOCGMIIREG:
- if (!netif_running(net_dev))
- return -EAGAIN;
- data->val_out = bgmac_phy_read(bgmac, data->phy_id,
- data->reg_num & 0x1f);
- return 0;
- case SIOCSMIIREG:
- if (!netif_running(net_dev))
- return -EAGAIN;
- bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
- data->val_in);
- return 0;
- default:
- return -EOPNOTSUPP;
- }
+ if (!netif_running(net_dev))
+ return -EINVAL;
+
+ return phy_mii_ioctl(bgmac->phy_dev, ifr, cmd);
}
static const struct net_device_ops bgmac_netdev_ops = {
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -220,27 +220,6 @@
#define BGMAC_RX_STATUS 0xb38
#define BGMAC_TX_STATUS 0xb3c
-#define BGMAC_PHY_CTL 0x00
-#define BGMAC_PHY_CTL_SPEED_MSB 0x0040
-#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */
-#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */
-#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */
-#define BGMAC_PHY_CTL_SPEED 0x2000
-#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */
-#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */
-/* Helpers */
-#define BGMAC_PHY_CTL_SPEED_10 0
-#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED
-#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB
-#define BGMAC_PHY_ADV 0x04
-#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */
-#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */
-#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */
-#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */
-#define BGMAC_PHY_ADV2 0x09
-#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */
-#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */
-
/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */
#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */