openwrt/target/linux/brcm63xx/patches-3.18/524-board_dsl_274xb_rev_f.patch
Jonas Gorski 387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00

141 lines
2.9 KiB
Diff

From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Mon, 30 Apr 2012 09:10:51 +0200
Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
DSL-274xB rev F1
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++
1 files changed, 104 insertions(+), 0 deletions(-)
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -224,6 +224,111 @@ static struct board_info __initdata boar
},
};
+
+static struct board_info __initdata board_dsl_274xb_f1 = {
+ .name = "AW4339U",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_ATHEROS,
+ .caldata_offset = 0x7d1000,
+ .slot = 0,
+ .led_pin = -1,
+ },
+ },
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 4",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 3",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 2",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 1",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "dsl-274xb:red:internet",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-274xb:green:dsl",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-274xb:green:power",
+ .gpio = 4,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "dsl-274xb:red:power",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-274xb:blue:wps",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "dsl-274xb:green:internet",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "wifi",
+ .gpio = 10,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "reset",
+ .gpio = 23,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "wps",
+ .gpio = 24,
+ .active_low = 1,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6328 */
/*
@@ -2176,6 +2281,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
&board_963281TAN,
+ &board_dsl_274xb_f1,
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
@@ -2234,6 +2340,7 @@ static struct of_device_id const bcm963x
#ifdef CONFIG_BCM63XX_CPU_6328
{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },