openwrt

OpenWRT branches i work with

Go to file

Felix Fietkau edc3ad9100 build: add TARGET_CXXFLAGS and EXTRA_CXXFLAGS, defaulting to *_CFLAGS via lazy evaluation. this allows adding c++ specific cflags SVN-Revision: 30760		2012-03-01 10:39:46 +00:00
docs
include	build: add TARGET_CXXFLAGS and EXTRA_CXXFLAGS, defaulting to *_CFLAGS via lazy evaluation. this allows adding c++ specific cflags	2012-03-01 10:39:46 +00:00
package	mac80211: fix ad-hoc mode performance regression	2012-03-01 09:57:56 +00:00
scripts	kernel: do not rename module symbols with kallsyms enabled	2012-03-01 09:58:03 +00:00
target	brcm47xx: use kernel 3.2 by default	2012-02-28 20:12:46 +00:00
toolchain	gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library	2012-02-17 16:55:08 +00:00
tools	tools: symlink seq to the host staging dir (gseq on mac os x)	2012-02-29 18:20:34 +00:00
.gitignore
BSDmakefile
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	2012-01-01 15:11:11 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	build: add TARGET_CXXFLAGS and EXTRA_CXXFLAGS, defaulting to *_CFLAGS via lazy evaluation. this allows adding c++ specific cflags	2012-03-01 10:39:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org