openwrt

OpenWRT branches i work with

Go to file

Felix Fietkau e8893fdf7a ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x SVN-Revision: 33446		2012-09-17 11:17:29 +00:00
docs
include	build: ensure that package/host-build build system code does not run in parallel, fixes rare spurious parallel build failures	2012-09-17 11:17:26 +00:00
package	netifd: prevent error in ifup if no /etc/config/wireless exists, properly handle wifi-iface sections which are part of multiple networks	2012-09-15 12:50:55 +00:00
scripts	fix library bundling when host libraries reside in /lib/tls/ or similar	2012-09-09 22:37:32 +00:00
target	ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x	2012-09-17 11:17:29 +00:00
toolchain	gcc: enable parallel builds	2012-09-15 14:18:19 +00:00
tools	tools/cmake: enable parallel builds	2012-09-15 14:18:10 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: add a config option for passing the top-level make jobserver to packages that have parallel build enabled, significantly improves parallelization and gets rid of CPU overcommit during intra-package parallel builds	2012-09-15 10:21:24 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	do not pass optimization flags in HOST_CPPFLAGS (#12153 )	2012-09-09 21:35:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org