OpenWRT branches i work with
Go to file
Nicolas Thill ddb98cb70f sunxi: add support for Olimex A20-OLinuXino-LIME
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43189
2014-11-06 00:05:23 +00:00
config config: use PARTUUID by default on x86_64 2014-10-27 14:35:39 +00:00
docs
include netfilter: Enable compiling iptables match cluster 2014-11-03 22:01:45 +00:00
package uboot-sunxi: add support for Olimex A20-OLinuXino-LIME 2014-11-06 00:05:15 +00:00
scripts generate list of license information for packages 2014-10-26 16:57:33 +00:00
target sunxi: add support for Olimex A20-OLinuXino-LIME 2014-11-06 00:05:23 +00:00
toolchain toolchain: fix mips64 musl linker names 2014-10-24 00:15:58 +00:00
tools ramips: add support for A5-V11 board (resubmit) 2014-10-29 11:01:17 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile Revert "build: use ONESHELL to speed up scanning and the toplevel makefile" 2014-10-22 10:47:26 +00:00
README
rules.mk rules.mk: reduce shexport to one line to allow it to be put in a target context 2014-10-22 08:57:20 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org