openwrt

OpenWRT branches i work with

Go to file

Gabor Juhos d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600 Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34233		2012-11-18 09:32:36 +00:00
docs	update switch documentation	2012-10-12 12:13:56 +00:00
include	use xz compressed kernel tarballs	2012-11-18 08:49:08 +00:00
package	6relayd: add conffiles section, thanks swalker	2012-11-17 09:44:41 +00:00
scripts	scripts/om-fwupgradecfg-gen.sh: add support for the MR600	2012-11-18 09:32:36 +00:00
target	scripts/om-fwupgradecfg-gen.sh: add support for the MR600	2012-11-18 09:32:36 +00:00
toolchain	uClibc: backport a fix for dlsym(RTLD_NEXT, ...) use	2012-11-11 16:10:50 +00:00
tools	firmware-utils/mktplinkfw: add support for TL-WA7510N	2012-11-13 14:48:02 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	hide C++ standard library selection behind INSTALL_LIBSTDCPP	2012-10-24 13:05:07 +00:00
feeds.conf.default
LICENSE
Makefile	Makefile: add a check to bail out early when the path to the openwrt directory contains spaces (#12344 )	2012-10-21 02:00:11 +00:00
README
rules.mk	build: rework the package/install step - collect package install lists during package/compile, then install all packages at once	2012-10-06 16:01:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org