openwrt

OpenWRT branches i work with

Go to file

Hauke Mehrtens ca7f9638d5 broadcom-diag: support for the WNDR3700v3 I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 36482		2013-04-28 21:11:17 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update linux 3.8 to 3.8.9	2013-04-26 16:55:42 +00:00
linux/ramips/rt305x/profiles	ramips: add profile for Dlink DIR-615 H1	2013-04-25 19:03:09 +00:00
package	broadcom-diag: support for the WNDR3700v3	2013-04-28 21:11:17 +00:00
scripts	scripts/config: warn on deprected "depends" syntax instead of throwing a syntax error	2013-04-22 12:53:32 +00:00
target	broadcom-diag: support for the WNDR3700v3	2013-04-28 21:11:17 +00:00
toolchain	toolchain: get rid of libc implementation symbol overloading	2013-04-18 12:05:08 +00:00
tools	firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board	2013-04-26 17:00:47 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore
BSDmakefile
Config.in	build: add a CONFIG_MODULES symbol for compatibility with kernel menuconfig	2013-04-17 15:36:49 +00:00
feeds.conf.default	feeds: fix syntax error	2013-04-20 13:01:56 +00:00
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	toolchain: allow choosing the MIPS64 user-land ABI	2013-04-05 12:36:23 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org