openwrt

OpenWRT branches i work with

Go to file

Jonas Gorski c3eeff807f generic: rtl8366_smi: only assign pvid if no pvid was set yet Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35227		2013-01-18 15:19:11 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update linux 3.7 to 3.7.3	2013-01-18 11:44:42 +00:00
package	ipv6-support: adapt UCI defaults to new ordering	2013-01-18 12:52:51 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	generic: rtl8366_smi: only assign pvid if no pvid was set yet	2013-01-18 15:19:11 +00:00
toolchain	gcc: fix build for MIPS64 targets introduced by musl patch	2013-01-07 18:16:40 +00:00
tools	adds support for Edimax BR-6524N	2013-01-06 11:11:30 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	kernel: fix enabling coredump support on 3.7+	2013-01-13 11:33:39 +00:00
feeds.conf.default
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README
rules.mk	rules.mk: only select latest libgcc.a with wildcard match (#12798 )	2013-01-13 20:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org