openwrt

OpenWRT branches i work with

Go to file

Gabor Juhos ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards The PHY_SWAP and PHY_ADDR_SWAP bits are initialized differently by different versions of the bootloader. This leads to broken ethernet connection with OpenWrt on some boards. Turn both SWAP bits OFF on these boards to make it consistent regardless of the bootloader used. Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35037		2013-01-07 14:30:37 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	cmake.mk: add support for overriding the source dir, and define the cmake prefix path to avoid picking up host libraries for target builds (patch by Henning Rogge)	2012-12-29 11:12:31 +00:00
package	This patch updates uboot-xburst from 2009.11 to 2012.10-rc2 - Ingenic SoC support went upstream	2013-01-07 14:10:01 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards	2013-01-07 14:30:37 +00:00
toolchain	toolchain/musl: simplify musl install steps	2012-12-10 14:24:24 +00:00
tools	adds support for Edimax BR-6524N	2013-01-06 11:11:30 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	kernel: add a config option for direct i/o support	2013-01-03 18:52:15 +00:00
feeds.conf.default
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README
rules.mk	rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build	2012-12-02 15:15:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org