openwrt

OpenWRT branches i work with

Go to file

Jonas Gorski a7a82db16f bcm63xx: fix port state after network down bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. SVN-Revision: 31881		2012-05-27 13:22:40 +00:00
docs
include	kernel: update linux 3.3 to 3.3.7	2012-05-23 21:05:32 +00:00
package	kernel: remove a few more obsolete CompareKernelPatchVer calls, add dependencies on @TARGET_x86 for a few network drivers that are typically not found in non-PC equipment	2012-05-27 12:33:55 +00:00
scripts	target: add a feature flag for RTC support	2012-05-17 15:28:09 +00:00
target	bcm63xx: fix port state after network down	2012-05-27 13:22:40 +00:00
toolchain	uClibc: update to 0.9.33.2, fixes #4420	2012-05-15 13:42:32 +00:00
tools	tools: imagetag: add parameter for padding images	2012-05-27 13:22:19 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore
BSDmakefile
Config.in	make xz ramdisk images also available for 2.6.39+	2012-04-18 15:14:05 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	Use build suffix on build_dir paths	2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org