OpenWRT branches i work with
Go to file
2009-07-16 10:00:27 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN () 2009-07-05 11:17:49 +00:00
include move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff 2009-07-11 12:48:59 +00:00
package upgrade to new upstream version 1.4.4 2009-07-15 16:33:01 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target mach_gta02: Add some missing always_on regulator constraints and declare regulator constraints to be fully specified. 2009-07-16 10:00:27 +00:00
toolchain binutils: fix build failure on powerpc target 2009-07-14 19:43:15 +00:00
tools firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>) 2009-07-12 08:59:18 +00:00
.gitignore
BSDmakefile
Config.in add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README
rules.mk add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org