openwrt/target/linux/ramips/dts/rt3883.dtsi
Gabor Juhos 909fabe574 ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
2013-04-08 11:12:02 +00:00

284 lines
5.1 KiB
Plaintext

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,rt3883-soc";
cpus {
cpu@0 {
compatible = "mips,mips74Kc";
};
};
chosen {
bootargs = "console=ttyS0,57600";
};
aliases {
spi0 = &spi0;
};
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
sysc@0 {
compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
reg = <0x0 0x100>;
};
timer@100 {
compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
reg = <0x100 0x20>;
interrupt-parent = <&intc>;
interrupts = <1>;
};
watchdog@120 {
compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
reg = <0x120 0x10>;
};
intc: intc@200 {
compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
memc@300 {
compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
};
gpio0: gpio@600 {
compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
reg = <0x600 0x34>;
gpio-controller;
#gpio-cells = <2>;
ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
20 24 28 2c
30 34 ];
status = "disabled";
};
gpio1: gpio@638 {
compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
reg = <0x638 0x24>;
gpio-controller;
#gpio-cells = <2>;
ralink,num-gpios = <16>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
status = "disabled";
};
gpio2: gpio@660 {
compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
reg = <0x660 0x24>;
gpio-controller;
#gpio-cells = <2>;
ralink,num-gpios = <32>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
status = "disabled";
};
gpio3: gpio@688 {
compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
reg = <0x688 0x24>;
gpio-controller;
#gpio-cells = <2>;
ralink,num-gpios = <24>;
ralink,register-map = [ 00 04 08 0c
10 14 18 1c
20 24 ];
status = "disabled";
};
spi0: spi@b00 {
compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
reg = <0xb00 0x100>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uartlite@c00 {
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
};
ethernet@10100000 {
compatible = "ralink,rt3883-eth";
reg = <0x10100000 10000>;
interrupt-parent = <&cpuintc>;
interrupts = <5>;
status = "disabled";
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
pci@10140000 {
compatible = "ralink,rt3883-pci";
reg = <0x10140000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges; /* direct mapping */
status = "disabled";
pciintc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <4>;
};
host-bridge {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
bus-range = <0 255>;
ranges = <
0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 17 */
0x8800 0 0 1 &pciintc 18
0x8800 0 0 2 &pciintc 18
0x8800 0 0 3 &pciintc 18
0x8800 0 0 4 &pciintc 18
/* IDSEL 18 */
0x9000 0 0 1 &pciintc 19
0x9000 0 0 2 &pciintc 19
0x9000 0 0 3 &pciintc 19
0x9000 0 0 4 &pciintc 19
>;
pci-bridge@1 {
reg = <0x0800 0 0 0 0>;
device_type = "pci";
#interrupt-cells = <1>;
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
ralink,pci-slot = <1>;
interrupt-map-mask = <0x0 0 0 0>;
interrupt-map = <0x0 0 0 0 &pciintc 20>;
};
pci-slot@17 {
reg = <0x8800 0 0 0 0>;
device_type = "pci";
#interrupt-cells = <1>;
#address-cells = <3>;
#size-cells = <2>;
ralink,pci-slot = <17>;
status = "disabled";
};
pci-slot@18 {
reg = <0x9000 0 0 0 0>;
device_type = "pci";
#interrupt-cells = <1>;
#address-cells = <3>;
#size-cells = <2>;
ralink,pci-slot = <18>;
status = "disabled";
};
};
};
wmac@10180000 {
compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
reg = <0x10180000 40000>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
ralink,eeprom = "soc_wmac.eeprom";
status = "disabled";
};
ehci@101c0000 {
compatible = "ralink,rt3883-ehci", "ehci-platform";
reg = <0x101c0000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <18>;
status = "disabled";
};
ohci@101c1000 {
compatible = "ralink,rt3883-ohci", "ohci-platform";
reg = <0x101c1000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <18>;
status = "disabled";
};
};