OpenWRT branches i work with
Go to file
Hauke Mehrtens 817c56f77c broadcom-wl: fixup mac addresses.
Some series of devices are using the same mac address, which causes
conflicts for these devices we generate a new mac address based on the
base address. This patch adds this functionality to braodcom-wl.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41514
2014-07-05 19:23:40 +00:00
config config/Config-images.in: enable zlib as the default ubi compression 2014-06-24 18:14:05 +00:00
docs
include build: temporarily disable PKG_CHECK_FORMAT_SECURITY until after the release 2014-07-04 06:23:57 +00:00
package broadcom-wl: fixup mac addresses. 2014-07-05 19:23:40 +00:00
scripts scripts/abs2rel.pl: remove, it is unused 2014-07-04 12:11:40 +00:00
target brcm47xx: do not use mac addresses with 00:90:4C prefix, prevent mac address collisions. 2014-07-05 15:04:50 +00:00
toolchain musl: add sgidefs.h 2014-06-29 22:25:51 +00:00
tools b43-tools: update to version 019 2014-07-02 20:52:50 +00:00
.gitattributes
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in move menuconfig options into separate files 2013-11-22 14:30:40 +00:00
feeds.conf.default feeds.conf.default: add management feed 2014-06-12 15:08:08 +00:00
LICENSE
Makefile build: remove duplicate variable definitions 2014-03-21 15:54:11 +00:00
README
rules.mk partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk" 2014-03-22 19:52:48 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org