openwrt

OpenWRT branches i work with

Go to file

Hauke Mehrtens 6c14f5f3a6 brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device Most of the Linksys devices without an own GPIO configuration where detected as WRT54G. On one board this made OpenWrt to boot into failsafe every time, because one GPIO configurated as button was not a button. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37970		2013-09-13 16:00:52 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	Fix IPv6 NAT breaking older kernels	2013-09-03 06:29:46 +00:00
package	brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device	2013-09-13 16:00:52 +00:00
scripts	scripts/feeds: ensure that --ff is enabled	2013-09-02 18:25:10 +00:00
target	brcm47xx: detect WRT310NV1	2013-09-13 15:56:35 +00:00
toolchain	toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05	2013-09-11 14:29:44 +00:00
tools	tools/cmake: disable qt related checks to fix build issues	2013-09-07 18:33:07 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: enable MIPS16 again, but make it depend on !gcc-4.6	2013-09-10 14:40:06 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	build: decouple the mips16 support flag from the toolchain	2013-08-14 13:02:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org