openwrt

OpenWRT branches i work with

Go to file

Felix Fietkau 5dc134c542 Fix VLYNQ device enable for DG834Gv1 This patch allows VLYNQ devices on the DG834Gv1 to be successfully enabled. Currently the "__vlynq_enable_device" function attempts to set the VLYNQ device clock divisor to values from 1 through 8 until a link is successfully established. On the DG834Gv1 (but not the DG834Gv2), setting the VLYNQ device clock divisor to 1 (full rate) results in all further VLYNQ operations failing (including software reset), so the device is never enabled. This patches changes the function to only attempt divisors 2 through 8, and hence the device is successfully enabled. Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com> --------- SVN-Revision: 9656		2007-12-04 12:49:54 +00:00
docs	Allow specifying static IPv6 gateways (#2710 )	2007-11-16 07:27:59 +00:00
include	fix make clean for unconfigured build trees	2007-12-04 03:04:37 +00:00
package	add i8x0 audio driver	2007-12-03 21:21:17 +00:00
scripts	fix image names in arm-magic.sh (closes: #2682 )	2007-11-11 13:37:37 +00:00
target	Fix VLYNQ device enable for DG834Gv1	2007-12-04 12:49:54 +00:00
toolchain	fix a few stampfile locations	2007-11-20 19:58:49 +00:00
tools	fix another build issue on some osx machines - run ranlib on the lzma lib archive	2007-12-02 22:44:44 +00:00
.gitignore	add package/feeds to .gitignore	2007-10-13 02:05:06 +00:00
BSDmakefile
Config.in	add external kernel tree support	2007-11-20 13:21:01 +00:00
feeds.conf
LICENSE
Makefile	fix make clean for unconfigured build trees	2007-12-04 03:04:37 +00:00
README
rules.mk	fix hostapd rebuild check, isolate the common src/ directory for hostapd variants as well to fix compile errors when both variants are selected (#2722 )	2007-11-17 14:14:16 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org