OpenWRT branches i work with
Go to file
Gabor Juhos 1dd33c4d6c ar71xx: tew-712br: use ath79_parse_ascii_mac helper
Remove the local MAC address parser function and use
the generic one instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38090
2013-09-20 16:41:36 +00:00
docs
include include: add AutoProbe support 2013-09-17 21:45:05 +00:00
package package/mtd: enable seama fixup code for ar71xx 2013-09-19 22:36:40 +00:00
scripts scripts/feeds: ensure that --ff is enabled 2013-09-02 18:25:10 +00:00
target ar71xx: tew-712br: use ath79_parse_ascii_mac helper 2013-09-20 16:41:36 +00:00
toolchain toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05 2013-09-11 14:29:44 +00:00
tools firmware-utils/mktplinkfw: add support for the TL-MR13U board 2013-09-19 17:52:44 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in build: enable MIPS16 again, but make it depend on !gcc-4.6 2013-09-10 14:40:06 +00:00
feeds.conf.default feeds.conf.default: switch packages feed to git (#13818) 2013-07-05 02:04:40 +00:00
LICENSE
Makefile
README
rules.mk build: decouple the mips16 support flag from the toolchain 2013-08-14 13:02:29 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org