John Crispin
9483a322dd
lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
...
SVN-Revision: 42818
2014-10-06 20:07:30 +00:00
John Crispin
48d67fe650
lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
...
SVN-Revision: 42817
2014-10-06 20:07:19 +00:00
John Crispin
d0606948cb
lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
...
SVN-Revision: 42816
2014-10-06 20:07:04 +00:00
John Crispin
7103d61271
lantiq: fix some alt function on pinctrl-xway
...
SVN-Revision: 42815
2014-10-06 20:06:51 +00:00
John Crispin
619de2faf2
octeon: add patches which are not upstreamed yet
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42811
2014-10-06 20:06:06 +00:00
John Crispin
7350373657
octeon: remove kmod-ath9k from default packages
...
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42810
2014-10-06 20:05:52 +00:00
John Crispin
90cbc9a04f
octeon: prepare elf kernel image and md5sum for usb copying
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42809
2014-10-06 20:05:39 +00:00
John Crispin
3ff9c76e9e
octeon: fix serial console for 3.14 kernel
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42808
2014-10-06 20:05:29 +00:00
John Crispin
97c202968a
ralink: various i2c fixes
...
the driver did not handle all states correctly causing a deadlock of the i2c hw block.
Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>
SVN-Revision: 42807
2014-10-06 20:05:13 +00:00
Rafał Miłecki
d30e92884e
kernel: add some warnings to the old (built-in) rootfs splitter
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42806
2014-10-06 15:07:54 +00:00
Rafał Miłecki
a58a4bb580
kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT
...
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42805
2014-10-06 14:02:06 +00:00
Rafał Miłecki
b87ff2cae7
kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT
...
We want to remove that old (built-in) splitter at some point.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42804
2014-10-06 13:49:11 +00:00
John Crispin
36faa5b145
lantiq: led name has changed from adsl -> dsl
...
make the notify script aware of this.
https://dev.openwrt.org/ticket/18005
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42798
2014-10-06 05:18:52 +00:00
John Crispin
e77ae183a1
ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
...
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 42797
2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1
ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
...
[ ] conditions should use = instead of == for string equality.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 42796
2014-10-06 04:53:25 +00:00
John Crispin
05777fb947
ar71xx: simplify TP-LINK model detection
...
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 42795
2014-10-06 04:53:20 +00:00
John Crispin
73acd5050f
ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)
...
Signed-off-by: Jaehoon You <teslamint@gmail.com>
SVN-Revision: 42792
2014-10-06 04:52:57 +00:00
John Crispin
d76b7e0221
ramips: D-Link DIR-810L: make led naming consistent with other boards
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 42789
2014-10-06 04:52:36 +00:00
John Crispin
98114e7cdd
ralink: Add missing code to free GPIO on Ralink SoC
...
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de
SVN-Revision: 42788
2014-10-06 04:52:26 +00:00
John Crispin
491e028e2d
ar71xx: add LED defaults for the EnGenius ESR1750
...
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 42786
2014-10-06 04:52:13 +00:00
John Crispin
b04bb3eea7
ramips: Support for RAMIPS based Tripmate HT-TM02 board
...
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.
Signed-off-by: Ron Curry <wingspinner@gmail.com>
SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
John Crispin
e2c3c2280c
ar71xx: fix reset button gpio for OM2P/OM2P-HS
...
A typo in the definition for the OM2P reset button disabled its functionality
in OpenWrt. The actual button for these two devices is "1" and not "11".
Signed-off-by: Oren Poleg <oren@poleg.org>
[sven@open-mesh.org: added a commit subject+message]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 42782
2014-10-06 04:51:51 +00:00
Felix Fietkau
f35da063bc
targets: remove useless quotes around KERNELNAME
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Zoltan Herpai
fbbce1c8d8
sunxi: re-add rootfs build when no profile is set, fixes #17980 , thanks.
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42775
2014-10-05 17:32:36 +00:00
Jonas Gorski
14ebb012a4
brcm63xx: fix wrong fixups pointer
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42756
2014-10-03 11:03:58 +00:00
Rafał Miłecki
7436b17075
bcm53xx: build R6250 firmware with "Other Regions" region
...
This prevents vendor firmware from warning about incompatible region.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42754
2014-10-03 10:40:12 +00:00
Felix Fietkau
156b296b20
ar8216: set the pvid based on runtime state instead of port number to fix learning with enable_vlan = 0
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42753
2014-10-02 20:00:41 +00:00
Rafał Miłecki
66922082ed
bcm53xx: early support for Netgear R6300 V2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42743
2014-10-02 19:30:08 +00:00
Jonas Gorski
2fa8a656a6
brcm63xx: update spw500v sprom to values from gpl tarball
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42740
2014-10-02 12:26:36 +00:00
Jonas Gorski
60cb45427e
brcm63xx: reorder some patches according to their upstream state
...
The irq rewrite was accepted upstream.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42739
2014-10-02 12:26:19 +00:00
Jonas Gorski
57214b00ae
brcm63xx: Add DT support for 96368MVWG
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42738
2014-10-02 12:26:07 +00:00
Jonas Gorski
477826ef31
brcm63xx: Add DT support for 96368MVNgr
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42737
2014-10-02 12:25:57 +00:00
Jonas Gorski
cdea47cbc3
brcm63xx: Add DT support for 96358VW2
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42736
2014-10-02 12:25:41 +00:00
Jonas Gorski
80db30b508
brcm63xx: Add DT support for 96358VW
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42735
2014-10-02 12:25:36 +00:00
Jonas Gorski
e7ade47fba
brcm63xx: Add DT support for 96338W
...
Renamed of_board_id to convention.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42734
2014-10-02 12:25:27 +00:00
Jonas Gorski
d9194da882
brcm63xx: Add DT support for 96338GW
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42733
2014-10-02 12:25:22 +00:00
Jonas Gorski
73f576dff2
brcm63xx: Add DT support for 96348R
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42732
2014-10-02 12:25:13 +00:00
Jonas Gorski
35cf1adfc6
brcm63xx: Add DT support for 96348GW-11
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42731
2014-10-02 12:25:07 +00:00
Jonas Gorski
eaee4e3eb7
brcm63xx: Add DT support for 96348GW-10
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42730
2014-10-02 12:25:01 +00:00
Jonas Gorski
73d59ed675
brcm63xx: Add DT support for 96348GW
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42729
2014-10-02 12:24:39 +00:00
Jonas Gorski
99ecfbf702
brcm63xx: Add DT support for 96345GW2
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42728
2014-10-02 12:24:34 +00:00
Jonas Gorski
a950e2fce8
brcm63xx: Add DT support for 963281TAN
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42727
2014-10-02 12:24:29 +00:00
Jonas Gorski
ddcc29290c
brcm63xx: fix brcm63xx fallback typo
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42726
2014-10-02 12:24:14 +00:00
Rafał Miłecki
28301ea0b1
bcm53xx: early buttons support (without interrupts)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42718
2014-10-02 12:05:58 +00:00
Rafał Miłecki
bd12c49473
bcm53xx: backport bcma RFC patch that fixes LEDs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42717
2014-10-02 10:42:30 +00:00
Rafał Miłecki
01ab343779
bcm53xx: support devices with more (13+) partitions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42716
2014-10-02 09:51:54 +00:00
Rafał Miłecki
bbae0f7df0
bcm53xx: select LEDs support by default
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42715
2014-10-02 05:54:18 +00:00
Rafał Miłecki
1421516e65
bcm53xx: add BCM5301X patches sent upstream (bus and R6250 LEDs)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42711
2014-10-01 13:38:50 +00:00
Rafał Miłecki
59b965194d
kernel: update bcma to the tag master-2014-09-30 (wireless-next)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42710
2014-10-01 13:37:36 +00:00
Rafał Miłecki
26e85084b5
bcm53xx: rename BCM5301X DTS patch to match upstream order
...
SVN-Revision: 42708
2014-10-01 07:59:03 +00:00