bmips: add support for Arcadyan AR7516
The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
This commit is contained in:
Daniel González Cabanelas
Álvaro Fernández Rojas
parent
68ef2d1856
commit
df8e4b6c2e
|
|
@ -6,6 +6,10 @@
|
|||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
arcadyan,ar7516)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
|
||||
ucidef_set_led_netdev "wlan0" "WiFi" "green:wifi" "phy0-ap0"
|
||||
;;
|
||||
nucom,r5010unv2 |\
|
||||
sercomm,ad1018)
|
||||
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
||||
|
|
|
|||
|
|
@ -5,6 +5,10 @@
|
|||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
arcadyan,ar7516)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
comtrend,ar-5381u |\
|
||||
comtrend,ar-5387un |\
|
||||
nucom,r5010unv2)
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
. /lib/functions.sh
|
||||
|
||||
case "$(board_name)" in
|
||||
arcadyan,ar7516 |\
|
||||
comtrend,ar-5381u |\
|
||||
comtrend,ar-5387un |\
|
||||
nucom,r5010unv2)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,186 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6328.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Arcadyan AR7516";
|
||||
compatible = "arcadyan,ar7516", "brcm,bcm6328";
|
||||
|
||||
aliases {
|
||||
led-failsafe = &led_upgrade_green;
|
||||
led-upgrade = &led_upgrade_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm43227-sprom {
|
||||
compatible = "brcm,bcma-sprom";
|
||||
|
||||
pci-bus = <1>;
|
||||
pci-dev = <0>;
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
brcm,sprom = "brcm/bcm43227-sprom.bin";
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&hsspi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <16666667>;
|
||||
spi-tx-bus-width = <2>;
|
||||
spi-rx-bus-width = <2>;
|
||||
reg = <0>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cfe: partition@0 {
|
||||
label = "cfe";
|
||||
reg = <0x000000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
label = "firmware";
|
||||
reg = <0x010000 0x7e0000>;
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
label = "nvram";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
|
||||
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
|
||||
&pinctrl_leds>;
|
||||
|
||||
led_upgrade_green: led@1 {
|
||||
reg = <1>;
|
||||
label = "green:upgrade";
|
||||
};
|
||||
|
||||
led@6 {
|
||||
reg = <6>;
|
||||
active-low;
|
||||
label = "green:wan";
|
||||
};
|
||||
|
||||
led@7 {
|
||||
reg = <7>;
|
||||
active-low;
|
||||
label = "green:wifi";
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl_leds: leds {
|
||||
function = "led";
|
||||
pins = "gpio1", "gpio6", "gpio7";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
|
||||
phy-handle = <&phy2>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
|
||||
phy-handle = <&phy3>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "wan";
|
||||
|
||||
phy-handle = <&phy4>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cfe {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,5 +1,18 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
define Device/arcadyan_ar7516
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Arcadyan
|
||||
DEVICE_MODEL := AR7516
|
||||
CHIP_ID := 6328
|
||||
CFE_BOARD_ID := AR7516AAW
|
||||
FLASH_MB := 8
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES) broadcom-43227-sprom \
|
||||
kmod-leds-bcm6328
|
||||
endef
|
||||
TARGET_DEVICES += arcadyan_ar7516
|
||||
|
||||
define Device/comtrend_ar-5381u
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Comtrend
|
||||
|
|
|
|||
Loading…
Reference in New Issue