bmips: add support for Comtrend WAP-5813n
The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
parent
a9237c1af9
commit
c3b1ef2dfd
@ -6,6 +6,9 @@
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
comtrend,wap-5813n)
|
||||
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
||||
;;
|
||||
netgear,dgnd3700-v1 |\
|
||||
netgear,dgnd3800b)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "switch.1"
|
||||
|
||||
@ -14,6 +14,7 @@ comtrend,vr-3025un)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 iptv"
|
||||
;;
|
||||
comtrend,wap-5813n |\
|
||||
netgear,dgnd3700-v1 |\
|
||||
netgear,dgnd3800b |\
|
||||
netgear,evg2000)
|
||||
|
||||
@ -5,6 +5,7 @@
|
||||
case "$(board_name)" in
|
||||
comtrend,vr-3025u |\
|
||||
comtrend,vr-3025un |\
|
||||
comtrend,wap-5813n |\
|
||||
netgear,evg2000 |\
|
||||
observa,vh4032n)
|
||||
mtd fixtrx firmware
|
||||
|
||||
230
target/linux/bmips/dts/bcm6369-comtrend-wap-5813n.dts
Normal file
230
target/linux/bmips/dts/bcm6369-comtrend-wap-5813n.dts
Normal file
@ -0,0 +1,230 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6368.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Comtrend WAP-5813n";
|
||||
compatible = "comtrend,wap-5813n", "brcm,bcm6369", "brcm,bcm6368";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
wlan {
|
||||
label = "wlan";
|
||||
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WLAN>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@5 {
|
||||
label = "green:internet";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@14 {
|
||||
label = "green:usb";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: led@22 {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@23 {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: led@24 {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led@31 {
|
||||
label = "red:internet";
|
||||
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
bcm4322-sprom {
|
||||
compatible = "brcm,ssb-sprom";
|
||||
|
||||
pci-bus = <0>;
|
||||
pci-dev = <1>;
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
|
||||
brcm,sprom = "brcm/bcm4322-sprom.bin";
|
||||
brcm,sprom-fixups = <97 0xfeed>,
|
||||
<98 0x15d1>,
|
||||
<99 0xfb0d>,
|
||||
<113 0xfef7>,
|
||||
<114 0x15f7>,
|
||||
<115 0xfb1a>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&lsspi {
|
||||
status = "okay";
|
||||
|
||||
switch@0 {
|
||||
compatible = "brcm,bcm53115";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <781000>;
|
||||
dsa,member = <1 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
ethernet = <&switch0port4>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pflash {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cfe: partition@0 {
|
||||
label = "CFE";
|
||||
reg = <0x000000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x010000 0x7e0000>;
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "nvram";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
dsa,member = <0 0>;
|
||||
|
||||
ports {
|
||||
switch0port4: port@4 {
|
||||
reg = <4>;
|
||||
label = "extsw";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cfe {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
@ -27,6 +27,20 @@ define Device/comtrend_vr-3025un
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_vr-3025un
|
||||
|
||||
define Device/comtrend_wap-5813n
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Comtrend
|
||||
DEVICE_MODEL := WAP-5813n
|
||||
CHIP_ID := 6368
|
||||
SOC := bcm6369
|
||||
CFE_BOARD_ID := 96369R-1231N
|
||||
FLASH_MB := 8
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES) broadcom-4322-sprom \
|
||||
kmod-leds-gpio
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_wap-5813n
|
||||
|
||||
define Device/netgear_dgnd3700-v1
|
||||
$(Device/bcm63xx-netgear)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
|
||||
Loading…
Reference in New Issue
Block a user