add initial support for 2.6.29
SVN-Revision: 15357
This commit is contained in:
parent
b60fc68fa8
commit
8b82de7aa0
target/linux/ar71xx
config-2.6.29
patches-2.6.29
001-ar71xx_core.patch002-ar71xx_pci.patch003-ar71xx_usb_host.patch004-ar71xx_spi_controller.patch005-ar71xx_mac_driver.patch006-ar71xx_wdt_driver.patch100-mtd_m25p80_add_pm25lv_flash_support.patch101-ksz8041_phy_driver.patch102-mtd_m25p80_add_myloader_parser.patch103-mtd_m25p80_add_en25p32_support.patch104-mtd_m25p80_add_redboot_parser.patch105-mtd_m25p80_add_mx25lxxx_support.patch106-mtd_m25p80_add_xxxs33b_support.patch110-usb-ehci-add-war-for-synopsys-hc-bug.patch140-redboot_partition_scan.patch200-rb4xx_nand_driver.patch300-mips_fw_myloader.patch301-enable_prom_emulator.patch901-get_c0_compare_irq_function.patch902-mips_clocksource_init_war.patch
253
target/linux/ar71xx/config-2.6.29
Normal file
253
target/linux/ar71xx/config-2.6.29
Normal file
@ -0,0 +1,253 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
CONFIG_ADM6996_PHY=y
|
||||
# CONFIG_AG71XX is not set
|
||||
# CONFIG_AR71XX_EARLY_SERIAL is not set
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_GENERIC=y
|
||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||
CONFIG_AR71XX_MACH_PB42=y
|
||||
CONFIG_AR71XX_MACH_RB_4XX=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_TL_WR941ND=y
|
||||
CONFIG_AR71XX_MACH_UBNT=y
|
||||
CONFIG_AR71XX_MACH_WNR2000=y
|
||||
CONFIG_AR71XX_MACH_WP543=y
|
||||
CONFIG_AR71XX_WDT=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ATHEROS_AR71XX=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_BCM47XX is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit"
|
||||
CONFIG_COMPAT_NET_DEV_OPS=y
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
||||
CONFIG_CPU_HAS_LLSC=y
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
# CONFIG_CPU_LOONGSON2 is not set
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R5500 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_RM7000 is not set
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
# CONFIG_DCB is not set
|
||||
CONFIG_DEFAULT_VEGAS=y
|
||||
# CONFIG_DEFAULT_WESTWOOD is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_EEPROM_AT25 is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
# CONFIG_FREEZER is not set
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HAVE_AOUT is not set
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_INITRAMFS_ROOT_GID=0
|
||||
CONFIG_INITRAMFS_ROOT_UID=0
|
||||
CONFIG_INITRAMFS_SOURCE="../../root"
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_ISDN is not set
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
# CONFIG_LEMOTE_FULONG is not set
|
||||
# CONFIG_LIB80211 is not set
|
||||
# CONFIG_LSI_ET1011C_PHY is not set
|
||||
# CONFIG_M25PXX_USE_FAST_READ is not set
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_TX39XX is not set
|
||||
# CONFIG_MACH_TX49XX is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
# CONFIG_MIKROTIK_RB532 is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
CONFIG_MISC_FILESYSTEMS=y
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
CONFIG_MTD_CHAR=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_CONCAT=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
# CONFIG_MTD_LPDDR is not set
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
CONFIG_MTD_NAND=y
|
||||
# CONFIG_MTD_NAND_CAFE is not set
|
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||
# CONFIG_MTD_NAND_ECC_SMC is not set
|
||||
CONFIG_MTD_NAND_IDS=y
|
||||
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
||||
# CONFIG_MTD_NAND_NANDSIM is not set
|
||||
# CONFIG_MTD_NAND_PLATFORM is not set
|
||||
CONFIG_MTD_NAND_RB4XX=y
|
||||
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_TESTS is not set
|
||||
CONFIG_MYLOADER=y
|
||||
# CONFIG_NATIONAL_PHY is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NEC_MARKEINS is not set
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_MV88E6060=y
|
||||
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
|
||||
# CONFIG_NET_DSA_MV88E6131 is not set
|
||||
# CONFIG_NET_DSA_MV88E6XXX is not set
|
||||
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
|
||||
# CONFIG_NET_DSA_TAG_DSA is not set
|
||||
# CONFIG_NET_DSA_TAG_EDSA is not set
|
||||
CONFIG_NET_DSA_TAG_TRAILER=y
|
||||
# CONFIG_NET_SCH_DRR is not set
|
||||
# CONFIG_NF_DEFRAG_IPV4 is not set
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_NXP_STB220 is not set
|
||||
# CONFIG_NXP_STB225 is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
# CONFIG_PCI_STUB is not set
|
||||
# CONFIG_PCSPKR_PLATFORM is not set
|
||||
CONFIG_PHYLIB=y
|
||||
# CONFIG_PHYS_ADDR_T_64BIT is not set
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_PROBE_INITRD_HEADER is not set
|
||||
CONFIG_PROM_EMU=y
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP28 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_AR71XX=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
# CONFIG_SPI_GPIO is not set
|
||||
# CONFIG_SPI_GPIO_OLD is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
# CONFIG_TC35815 is not set
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
50
target/linux/ar71xx/patches-2.6.29/001-ar71xx_core.patch
Normal file
50
target/linux/ar71xx/patches-2.6.29/001-ar71xx_core.patch
Normal file
@ -0,0 +1,50 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -602,6 +602,13 @@ else
|
||||
load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000
|
||||
endif
|
||||
|
||||
+#
|
||||
+# Atheros AR71xx
|
||||
+#
|
||||
+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
|
||||
+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
|
||||
+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
|
||||
+
|
||||
# temporary until string.h is fixed
|
||||
cflags-y += -ffreestanding
|
||||
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -22,6 +22,23 @@ choice
|
||||
config MACH_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
|
||||
+config ATHEROS_AR71XX
|
||||
+ bool "Atheros AR71xx based boards"
|
||||
+ select CEVT_R4K
|
||||
+ select CSRC_R4K
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select HW_HAS_PCI
|
||||
+ select IRQ_CPU
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_CPU_MIPS32_R2
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select MIPS_MACHINE
|
||||
+ help
|
||||
+ Support for Atheros AR71xx based boards.
|
||||
+
|
||||
config BASLER_EXCITE
|
||||
bool "Basler eXcite smart camera"
|
||||
select CEVT_R4K
|
||||
@@ -640,6 +657,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
|
||||
endchoice
|
||||
|
||||
source "arch/mips/alchemy/Kconfig"
|
||||
+source "arch/mips/ar71xx/Kconfig"
|
||||
source "arch/mips/basler/excite/Kconfig"
|
||||
source "arch/mips/jazz/Kconfig"
|
||||
source "arch/mips/lasat/Kconfig"
|
10
target/linux/ar71xx/patches-2.6.29/002-ar71xx_pci.patch
Normal file
10
target/linux/ar71xx/patches-2.6.29/002-ar71xx_pci.patch
Normal file
@ -0,0 +1,10 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o
|
||||
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
|
||||
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
|
||||
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
|
||||
+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o
|
||||
|
||||
#
|
||||
# These are still pretty much in the old state, watch, go blind.
|
58
target/linux/ar71xx/patches-2.6.29/003-ar71xx_usb_host.patch
Normal file
58
target/linux/ar71xx/patches-2.6.29/003-ar71xx_usb_host.patch
Normal file
@ -0,0 +1,58 @@
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -81,6 +81,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
|
||||
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
|
||||
default y
|
||||
|
||||
+config USB_EHCI_AR71XX
|
||||
+ bool "USB EHCI support for AR71xx"
|
||||
+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
|
||||
+ default y
|
||||
+ help
|
||||
+ Support for Atheros AR71xx built-in EHCI controller
|
||||
+
|
||||
config USB_EHCI_FSL
|
||||
bool "Support for Freescale on-chip EHCI USB controller"
|
||||
depends on USB_EHCI_HCD && FSL_SOC
|
||||
@@ -154,6 +161,13 @@ config USB_OHCI_HCD
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ohci-hcd.
|
||||
|
||||
+config USB_OHCI_AR71XX
|
||||
+ bool "USB OHCI support for Atheros AR71xx"
|
||||
+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
|
||||
+ default y
|
||||
+ help
|
||||
+ Support for Atheros AR71xx built-in OHCI controller
|
||||
+
|
||||
config USB_OHCI_HCD_PPC_SOC
|
||||
bool "OHCI support for on-chip PPC USB controller"
|
||||
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
|
||||
--- a/drivers/usb/host/ehci-hcd.c
|
||||
+++ b/drivers/usb/host/ehci-hcd.c
|
||||
@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define PLATFORM_DRIVER ixp4xx_ehci_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_EHCI_AR71XX
|
||||
+#include "ehci-ar71xx.c"
|
||||
+#define PLATFORM_DRIVER ehci_ar71xx_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
|
||||
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
|
||||
#error "missing bus glue for ehci-hcd"
|
||||
--- a/drivers/usb/host/ohci-hcd.c
|
||||
+++ b/drivers/usb/host/ohci-hcd.c
|
||||
@@ -1080,6 +1080,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_OHCI_AR71XX
|
||||
+#include "ohci-ar71xx.c"
|
||||
+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && \
|
||||
!defined(PLATFORM_DRIVER) && \
|
||||
!defined(OF_PLATFORM_DRIVER) && \
|
@ -0,0 +1,26 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -53,6 +53,13 @@ if SPI_MASTER
|
||||
|
||||
comment "SPI Master Controller Drivers"
|
||||
|
||||
+config SPI_AR71XX
|
||||
+ tristate "Atheros AR71xx SPI Controller"
|
||||
+ depends on SPI_MASTER && ATHEROS_AR71XX
|
||||
+ select SPI_BITBANG
|
||||
+ help
|
||||
+ This is the SPI contoller driver for Atheros AR71xx.
|
||||
+
|
||||
config SPI_ATMEL
|
||||
tristate "Atmel SPI Controller"
|
||||
depends on (ARCH_AT91 || AVR32)
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -11,6 +11,7 @@ endif
|
||||
obj-$(CONFIG_SPI_MASTER) += spi.o
|
||||
|
||||
# SPI master controller drivers (bus)
|
||||
+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
|
||||
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
|
||||
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
|
||||
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
|
@ -0,0 +1,21 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -2068,6 +2068,8 @@ config ACENIC_OMIT_TIGON_I
|
||||
|
||||
The safe and default value for this is N.
|
||||
|
||||
+source drivers/net/ag71xx/Kconfig
|
||||
+
|
||||
config DL2K
|
||||
tristate "DL2000/TC902x-based Gigabit Ethernet support"
|
||||
depends on PCI
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -2,6 +2,7 @@
|
||||
# Makefile for the Linux network (ethercard) device drivers.
|
||||
#
|
||||
|
||||
+obj-$(CONFIG_AG71XX) += ag71xx/
|
||||
obj-$(CONFIG_E1000) += e1000/
|
||||
obj-$(CONFIG_E1000E) += e1000e/
|
||||
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
|
@ -0,0 +1,26 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -766,6 +766,13 @@ config TXX9_WDT
|
||||
help
|
||||
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
|
||||
|
||||
+config AR71XX_WDT
|
||||
+ tristate "Atheros AR71xx Watchdog Timer"
|
||||
+ depends on ATHEROS_AR71XX
|
||||
+ help
|
||||
+ Hardware driver for the built-in watchdog timer on the Atheros
|
||||
+ AR71xx SoCs.
|
||||
+
|
||||
# PARISC Architecture
|
||||
|
||||
# POWERPC Architecture
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -107,6 +107,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
||||
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
|
||||
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
||||
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
|
||||
|
||||
# PARISC Architecture
|
||||
|
@ -0,0 +1,13 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -504,6 +504,10 @@ static struct flash_info __devinitdata m
|
||||
{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
|
||||
{ "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
|
||||
|
||||
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
||||
+
|
||||
/* Spansion -- single (large) sector size only, at least
|
||||
* for the chips listed here (without boot sectors).
|
||||
*/
|
@ -0,0 +1,24 @@
|
||||
--- a/drivers/net/phy/Kconfig
|
||||
+++ b/drivers/net/phy/Kconfig
|
||||
@@ -96,6 +96,11 @@ config ADM6996_PHY
|
||||
config MVSWITCH_PHY
|
||||
tristate "Driver for Marvell 88E6060 switches"
|
||||
|
||||
+config MICREL_PHY
|
||||
+ tristate "Drivers for Micrel/Kendin PHYs"
|
||||
+ ---help---
|
||||
+ Currently has a driver for the KSZ8041
|
||||
+
|
||||
config FIXED_PHY
|
||||
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
||||
depends on PHYLIB=y
|
||||
--- a/drivers/net/phy/Makefile
|
||||
+++ b/drivers/net/phy/Makefile
|
||||
@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
|
||||
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
|
||||
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
||||
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
|
||||
+obj-$(CONFIG_MICREL) += micrel.o
|
||||
obj-$(CONFIG_FIXED_PHY) += fixed.o
|
||||
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
||||
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
|
@ -0,0 +1,22 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -712,12 +712,17 @@ static int __devinit m25p_probe(struct s
|
||||
struct mtd_partition *parts = NULL;
|
||||
int nr_parts = 0;
|
||||
|
||||
+ static const char *part_probes[] = {
|
||||
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
||||
- static const char *part_probes[] = { "cmdlinepart", NULL, };
|
||||
+ "cmdlinepart",
|
||||
+#endif
|
||||
+#ifdef CONFIG_MTD_MYLOADER_PARTS
|
||||
+ "MyLoader",
|
||||
+#endif
|
||||
+ NULL, };
|
||||
|
||||
nr_parts = parse_mtd_partitions(&flash->mtd,
|
||||
part_probes, &parts, 0);
|
||||
-#endif
|
||||
|
||||
if (nr_parts <= 0 && data && data->parts) {
|
||||
parts = data->parts;
|
@ -0,0 +1,12 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -504,6 +504,9 @@ static struct flash_info __devinitdata m
|
||||
{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
|
||||
{ "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
|
||||
|
||||
+ /* EON -- en25px */
|
||||
+ { "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
|
||||
+
|
||||
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
@ -0,0 +1,12 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -722,6 +722,9 @@ static int __devinit m25p_probe(struct s
|
||||
#ifdef CONFIG_MTD_MYLOADER_PARTS
|
||||
"MyLoader",
|
||||
#endif
|
||||
+#ifdef CONFIG_MTD_REDBOOT_PARTS
|
||||
+ "RedBoot",
|
||||
+#endif
|
||||
NULL, };
|
||||
|
||||
nr_parts = parse_mtd_partitions(&flash->mtd,
|
@ -0,0 +1,14 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -507,6 +507,11 @@ static struct flash_info __devinitdata m
|
||||
/* EON -- en25px */
|
||||
{ "en25p32", 0x1c2016, 0, 64 * 1024, 64, },
|
||||
|
||||
+ /* Macronix -- mx25lxxx */
|
||||
+ { "mx25l32", 0xc22016, 0, 64 * 1024, 64, },
|
||||
+ { "mx25l64", 0xc22017, 0, 64 * 1024, 128, },
|
||||
+ { "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
|
||||
+
|
||||
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
@ -0,0 +1,14 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -512,6 +512,11 @@ static struct flash_info __devinitdata m
|
||||
{ "mx25l64", 0xc22017, 0, 64 * 1024, 128, },
|
||||
{ "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
|
||||
|
||||
+ /* Numonyx -- xxxs33b */
|
||||
+ { "160s33b", 0x898911, 0, 64 * 1024, 64, },
|
||||
+ { "320s33b", 0x898912, 0, 64 * 1024, 128, },
|
||||
+ { "640s33b", 0x898913, 0, 64 * 1024, 256, },
|
||||
+
|
||||
/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
|
||||
{ "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
|
||||
{ "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
|
@ -0,0 +1,22 @@
|
||||
--- a/drivers/usb/host/ehci-q.c
|
||||
+++ b/drivers/usb/host/ehci-q.c
|
||||
@@ -1082,6 +1082,9 @@ static void end_unlink_async (struct ehc
|
||||
ehci->reclaim = NULL;
|
||||
start_unlink_async (ehci, next);
|
||||
}
|
||||
+
|
||||
+ if (ehci->has_synopsys_hc_bug)
|
||||
+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
|
||||
}
|
||||
|
||||
/* makes sure the async qh will become idle */
|
||||
--- a/drivers/usb/host/ehci.h
|
||||
+++ b/drivers/usb/host/ehci.h
|
||||
@@ -125,6 +125,7 @@ struct ehci_hcd { /* one per controlle
|
||||
unsigned big_endian_mmio:1;
|
||||
unsigned big_endian_desc:1;
|
||||
unsigned has_amcc_usb23:1;
|
||||
+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
|
||||
|
||||
/* required for usb32 quirk */
|
||||
#define OHCI_CTRL_HCFS (3 << 6)
|
@ -0,0 +1,54 @@
|
||||
--- a/drivers/mtd/redboot.c
|
||||
+++ b/drivers/mtd/redboot.c
|
||||
@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
|
||||
static char nullstring[] = "unallocated";
|
||||
#endif
|
||||
|
||||
+ buf = vmalloc(master->erasesize);
|
||||
+ if (!buf)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ restart:
|
||||
if ( directory < 0 ) {
|
||||
offset = master->size + directory * master->erasesize;
|
||||
- while (master->block_isbad &&
|
||||
+ while (master->block_isbad &&
|
||||
master->block_isbad(master, offset)) {
|
||||
if (!offset) {
|
||||
nogood:
|
||||
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
|
||||
+ vfree(buf);
|
||||
return -EIO;
|
||||
}
|
||||
offset -= master->erasesize;
|
||||
}
|
||||
} else {
|
||||
offset = directory * master->erasesize;
|
||||
- while (master->block_isbad &&
|
||||
+ while (master->block_isbad &&
|
||||
master->block_isbad(master, offset)) {
|
||||
offset += master->erasesize;
|
||||
if (offset == master->size)
|
||||
goto nogood;
|
||||
}
|
||||
}
|
||||
- buf = vmalloc(master->erasesize);
|
||||
-
|
||||
- if (!buf)
|
||||
- return -ENOMEM;
|
||||
-
|
||||
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
|
||||
master->name, offset);
|
||||
|
||||
@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
|
||||
}
|
||||
if (i == numslots) {
|
||||
/* Didn't find it */
|
||||
+ if (offset + master->erasesize < master->size) {
|
||||
+ /* not at the end of the flash yet, maybe next block :) */
|
||||
+ directory++;
|
||||
+ goto restart;
|
||||
+ }
|
||||
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
|
||||
master->name);
|
||||
ret = 0;
|
@ -0,0 +1,21 @@
|
||||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -427,4 +427,8 @@ config MTD_NAND_SH_FLCTL
|
||||
Several Renesas SuperH CPU has FLCTL. This option enables support
|
||||
for NAND Flash using FLCTL. This driver support SH7723.
|
||||
|
||||
+config MTD_NAND_RB4XX
|
||||
+ tristate "NAND flash driver for RouterBoard 4xx series"
|
||||
+ depends on MTD_NAND && ATHEROS_AR71XX
|
||||
+
|
||||
endif # MTD_NAND
|
||||
--- a/drivers/mtd/nand/Makefile
|
||||
+++ b/drivers/mtd/nand/Makefile
|
||||
@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
|
||||
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
|
||||
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
||||
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
@ -0,0 +1,22 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -164,6 +164,7 @@ endif
|
||||
#
|
||||
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
|
||||
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
|
||||
+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
|
||||
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
|
||||
libs-y += arch/mips/fw/lib/
|
||||
libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -825,6 +825,9 @@ config MIPS_NILE4
|
||||
config MIPS_DISABLE_OBSOLETE_IDE
|
||||
bool
|
||||
|
||||
+config MYLOADER
|
||||
+ bool
|
||||
+
|
||||
config SYNC_R4K
|
||||
bool
|
||||
|
@ -0,0 +1,10 @@
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -36,6 +36,7 @@ config ATHEROS_AR71XX
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
select MIPS_MACHINE
|
||||
+ select PROM_EMU
|
||||
help
|
||||
Support for Atheros AR71xx based boards.
|
||||
|
@ -0,0 +1,29 @@
|
||||
--- a/arch/mips/kernel/traps.c
|
||||
+++ b/arch/mips/kernel/traps.c
|
||||
@@ -48,6 +48,7 @@
|
||||
#include <asm/types.h>
|
||||
#include <asm/stacktrace.h>
|
||||
#include <asm/irq.h>
|
||||
+#include <asm/time.h>
|
||||
|
||||
extern void check_wait(void);
|
||||
extern asmlinkage void r4k_wait(void);
|
||||
@@ -1541,6 +1542,8 @@ void __cpuinit per_cpu_trap_init(void)
|
||||
*/
|
||||
if (cpu_has_mips_r2) {
|
||||
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
|
||||
+ if (get_c0_compare_irq)
|
||||
+ cp0_compare_irq = get_c0_compare_irq();
|
||||
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
|
||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
||||
cp0_perfcount_irq = -1;
|
||||
--- a/arch/mips/include/asm/time.h
|
||||
+++ b/arch/mips/include/asm/time.h
|
||||
@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
|
||||
*/
|
||||
#ifdef CONFIG_CEVT_R4K_LIB
|
||||
extern unsigned int __weak get_c0_compare_int(void);
|
||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
||||
extern int r4k_clockevent_init(void);
|
||||
#endif
|
||||
|
@ -0,0 +1,56 @@
|
||||
--- a/arch/mips/kernel/cevt-r4k.c
|
||||
+++ b/arch/mips/kernel/cevt-r4k.c
|
||||
@@ -15,6 +15,22 @@
|
||||
#include <asm/cevt-r4k.h>
|
||||
|
||||
/*
|
||||
+ * Compare interrupt can be routed and latched outside the core,
|
||||
+ * so a single execution hazard barrier may not be enough to give
|
||||
+ * it time to clear as seen in the Cause register. 4 time the
|
||||
+ * pipeline depth seems reasonably conservative, and empirically
|
||||
+ * works better in configurations with high CPU/bus clock ratios.
|
||||
+ */
|
||||
+
|
||||
+#define compare_change_hazard() \
|
||||
+ do { \
|
||||
+ irq_disable_hazard(); \
|
||||
+ irq_disable_hazard(); \
|
||||
+ irq_disable_hazard(); \
|
||||
+ irq_disable_hazard(); \
|
||||
+ } while (0)
|
||||
+
|
||||
+/*
|
||||
* The SMTC Kernel for the 34K, 1004K, et. al. replaces several
|
||||
* of these routines with SMTC-specific variants.
|
||||
*/
|
||||
@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
|
||||
cnt = read_c0_count();
|
||||
cnt += delta;
|
||||
write_c0_compare(cnt);
|
||||
+ compare_change_hazard();
|
||||
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
|
||||
return res;
|
||||
}
|
||||
@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
|
||||
return (read_c0_cause() >> cp0_compare_irq) & 0x100;
|
||||
}
|
||||
|
||||
-/*
|
||||
- * Compare interrupt can be routed and latched outside the core,
|
||||
- * so a single execution hazard barrier may not be enough to give
|
||||
- * it time to clear as seen in the Cause register. 4 time the
|
||||
- * pipeline depth seems reasonably conservative, and empirically
|
||||
- * works better in configurations with high CPU/bus clock ratios.
|
||||
- */
|
||||
-
|
||||
-#define compare_change_hazard() \
|
||||
- do { \
|
||||
- irq_disable_hazard(); \
|
||||
- irq_disable_hazard(); \
|
||||
- irq_disable_hazard(); \
|
||||
- irq_disable_hazard(); \
|
||||
- } while (0)
|
||||
-
|
||||
int c0_compare_int_usable(void)
|
||||
{
|
||||
unsigned int delta;
|
Loading…
Reference in New Issue
Block a user