add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA

SVN-Revision: 17234
This commit is contained in:
Florian Fainelli 2009-08-12 08:41:47 +00:00
parent 7610c78205
commit 3fd180eb53
2 changed files with 332 additions and 0 deletions

View File

@ -177,3 +177,291 @@ struct pci_ops bcm63xx_pci_ops = {
.read = bcm63xx_pci_read,
.write = bcm63xx_pci_write
};
#ifdef CONFIG_CARDBUS
/*
* emulate configuration read access on a cardbus bridge
*/
#define FAKE_CB_BRIDGE_SLOT 0x1e
static int fake_cb_bridge_bus_number = -1;
static struct {
u16 pci_command;
u8 cb_latency;
u8 subordinate_busn;
u8 cardbus_busn;
u8 pci_busn;
int bus_assigned;
u16 bridge_control;
u32 mem_base0;
u32 mem_limit0;
u32 mem_base1;
u32 mem_limit1;
u32 io_base0;
u32 io_limit0;
u32 io_base1;
u32 io_limit1;
} fake_cb_bridge_regs;
static int fake_cb_bridge_read(int where, int size, u32 *val)
{
unsigned int reg;
u32 data;
data = 0;
reg = where >> 2;
switch (reg) {
case (PCI_VENDOR_ID >> 2):
case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
/* create dummy vendor/device id from our cpu id */
data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
break;
case (PCI_COMMAND >> 2):
data = (PCI_STATUS_DEVSEL_SLOW << 16);
data |= fake_cb_bridge_regs.pci_command;
break;
case (PCI_CLASS_REVISION >> 2):
data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
break;
case (PCI_CACHE_LINE_SIZE >> 2):
data = (PCI_HEADER_TYPE_CARDBUS << 16);
break;
case (PCI_INTERRUPT_LINE >> 2):
/* bridge control */
data = (fake_cb_bridge_regs.bridge_control << 16);
/* pin:intA line:0xff */
data |= (0x1 << 8) | 0xff;
break;
case (PCI_CB_PRIMARY_BUS >> 2):
data = (fake_cb_bridge_regs.cb_latency << 24);
data |= (fake_cb_bridge_regs.subordinate_busn << 16);
data |= (fake_cb_bridge_regs.cardbus_busn << 8);
data |= fake_cb_bridge_regs.pci_busn;
break;
case (PCI_CB_MEMORY_BASE_0 >> 2):
data = fake_cb_bridge_regs.mem_base0;
break;
case (PCI_CB_MEMORY_LIMIT_0 >> 2):
data = fake_cb_bridge_regs.mem_limit0;
break;
case (PCI_CB_MEMORY_BASE_1 >> 2):
data = fake_cb_bridge_regs.mem_base1;
break;
case (PCI_CB_MEMORY_LIMIT_1 >> 2):
data = fake_cb_bridge_regs.mem_limit1;
break;
case (PCI_CB_IO_BASE_0 >> 2):
/* | 1 for 32bits io support */
data = fake_cb_bridge_regs.io_base0 | 0x1;
break;
case (PCI_CB_IO_LIMIT_0 >> 2):
data = fake_cb_bridge_regs.io_limit0;
break;
case (PCI_CB_IO_BASE_1 >> 2):
/* | 1 for 32bits io support */
data = fake_cb_bridge_regs.io_base1 | 0x1;
break;
case (PCI_CB_IO_LIMIT_1 >> 2):
data = fake_cb_bridge_regs.io_limit1;
break;
}
*val = postprocess_read(data, where, size);
return PCIBIOS_SUCCESSFUL;
}
/*
* emulate configuration write access on a cardbus bridge
*/
static int fake_cb_bridge_write(int where, int size, u32 val)
{
unsigned int reg;
u32 data, tmp;
int ret;
ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
data = preprocess_write(data, val, where, size);
reg = where >> 2;
switch (reg) {
case (PCI_COMMAND >> 2):
fake_cb_bridge_regs.pci_command = (data & 0xffff);
break;
case (PCI_CB_PRIMARY_BUS >> 2):
fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
fake_cb_bridge_regs.pci_busn = data & 0xff;
if (fake_cb_bridge_regs.cardbus_busn)
fake_cb_bridge_regs.bus_assigned = 1;
break;
case (PCI_INTERRUPT_LINE >> 2):
tmp = (data >> 16) & 0xffff;
/* disable memory prefetch support */
tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
fake_cb_bridge_regs.bridge_control = tmp;
break;
case (PCI_CB_MEMORY_BASE_0 >> 2):
fake_cb_bridge_regs.mem_base0 = data;
break;
case (PCI_CB_MEMORY_LIMIT_0 >> 2):
fake_cb_bridge_regs.mem_limit0 = data;
break;
case (PCI_CB_MEMORY_BASE_1 >> 2):
fake_cb_bridge_regs.mem_base1 = data;
break;
case (PCI_CB_MEMORY_LIMIT_1 >> 2):
fake_cb_bridge_regs.mem_limit1 = data;
break;
case (PCI_CB_IO_BASE_0 >> 2):
fake_cb_bridge_regs.io_base0 = data;
break;
case (PCI_CB_IO_LIMIT_0 >> 2):
fake_cb_bridge_regs.io_limit0 = data;
break;
case (PCI_CB_IO_BASE_1 >> 2):
fake_cb_bridge_regs.io_base1 = data;
break;
case (PCI_CB_IO_LIMIT_1 >> 2):
fake_cb_bridge_regs.io_limit1 = data;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
/* snoop access to slot 0x1e on root bus, we fake a cardbus
* bridge at this location */
if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
fake_cb_bridge_bus_number = bus->number;
return fake_cb_bridge_read(where, size, val);
}
/* a configuration cycle for the device behind the cardbus
* bridge is actually done as a type 0 cycle on the primary
* bus. This means that only one device can be on the cardbus
* bus */
if (fake_cb_bridge_regs.bus_assigned &&
bus->number == fake_cb_bridge_regs.cardbus_busn &&
PCI_SLOT(devfn) == 0)
return bcm63xx_do_cfg_read(0, 0,
PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
where, size, val);
return PCIBIOS_DEVICE_NOT_FOUND;
}
static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
fake_cb_bridge_bus_number = bus->number;
return fake_cb_bridge_write(where, size, val);
}
if (fake_cb_bridge_regs.bus_assigned &&
bus->number == fake_cb_bridge_regs.cardbus_busn &&
PCI_SLOT(devfn) == 0)
return bcm63xx_do_cfg_write(0, 0,
PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
where, size, val);
return PCIBIOS_DEVICE_NOT_FOUND;
}
struct pci_ops bcm63xx_cb_ops = {
.read = bcm63xx_cb_read,
.write = bcm63xx_cb_write,
};
/*
* only one IO window, so it cannot be shared by PCI and cardbus, use
* fixup to choose and detect unhandled configuration
*/
static void bcm63xx_fixup(struct pci_dev *dev)
{
static int io_window = -1;
int i, found, new_io_window;
u32 val;
/* look for any io resource */
found = 0;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
found = 1;
break;
}
}
if (!found)
return;
/* skip our fake bus with only cardbus bridge on it */
if (dev->bus->number == fake_cb_bridge_bus_number)
return;
/* find on which bus the device is */
if (fake_cb_bridge_regs.bus_assigned &&
dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
PCI_SLOT(dev->devfn) == 0)
new_io_window = 1;
else
new_io_window = 0;
if (new_io_window == io_window)
return;
if (io_window != -1) {
printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
"need IO, which hardware cannot do\n");
return;
}
printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
(new_io_window == 0) ? "PCI" : "cardbus");
val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
if (io_window)
val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
else
val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
io_window = new_io_window;
}
DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
#endif

View File

@ -28,7 +28,11 @@ static struct resource bcm_pci_mem_resource = {
static struct resource bcm_pci_io_resource = {
.name = "bcm63xx PCI IO space",
.start = BCM_PCI_IO_BASE_PA,
#ifdef CONFIG_CARDBUS
.end = BCM_PCI_IO_HALF_PA,
#else
.end = BCM_PCI_IO_END_PA,
#endif
.flags = IORESOURCE_IO
};
@ -38,6 +42,33 @@ struct pci_controller bcm63xx_controller = {
.mem_resource = &bcm_pci_mem_resource,
};
/*
* We handle cardbus via a fake Cardbus bridge, memory and io spaces
* have to be clearly separated from PCI one since we have different
* memory decoder.
*/
#ifdef CONFIG_CARDBUS
static struct resource bcm_cb_mem_resource = {
.name = "bcm63xx Cardbus memory space",
.start = BCM_CB_MEM_BASE_PA,
.end = BCM_CB_MEM_END_PA,
.flags = IORESOURCE_MEM
};
static struct resource bcm_cb_io_resource = {
.name = "bcm63xx Cardbus IO space",
.start = BCM_PCI_IO_HALF_PA + 1,
.end = BCM_PCI_IO_END_PA,
.flags = IORESOURCE_IO
};
struct pci_controller bcm63xx_cb_controller = {
.pci_ops = &bcm63xx_cb_ops,
.io_resource = &bcm_cb_io_resource,
.mem_resource = &bcm_cb_mem_resource,
};
#endif
static u32 bcm63xx_int_cfg_readl(u32 reg)
{
u32 tmp;
@ -98,8 +129,17 @@ static int __init bcm63xx_pci_init(void)
val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
bcm_pcmcia_writel(val, PCMCIA_C1_REG);
#ifdef CONFIG_CARDBUS
/* setup local bus to PCI access (Cardbus memory) */
val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
#else
/* disable second access windows */
bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
#endif
/* setup local bus to PCI access (IO memory), we have only 1
* IO window for both PCI and cardbus, but it cannot handle
@ -169,6 +209,10 @@ static int __init bcm63xx_pci_init(void)
register_pci_controller(&bcm63xx_controller);
#ifdef CONFIG_CARDBUS
register_pci_controller(&bcm63xx_cb_controller);
#endif
/* mark memory space used for IO mapping as reserved */
request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
"bcm63xx PCI IO space");