ar71xx: Add support for Ubiquity Bullet M (XW)
CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 100 MBit (24V PoE in) WLAN: 2.4/5 GHz UART: 1 UART on PCB marked as J1 with 115200 8N1 config LEDs: Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset UART connection details .---------------------------------. | | [ETH] J1 [ANT] | o VCC o RX o TX o GND | `---------------------------------' Flashing instructions using recovery method over TFTP 1. Unplug the ethernet cable from the router. 2. Using paper clip press and hold the router's reset button. Make sure you can feel it depressed by the paper clip. Do not release the button until step 4. 3. While keeping the reset button pressed in, plug the ethernet cable back into the AP. Keep the reset button depressed until you see the device's LEDs flashing in upgrade mode (alternating LED1/LED3 and LED2/LED4), this may take up to 25 seconds. 4. You may release the reset button, now the device should be in TFTP transfer mode. 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24 should work. 6. Plug the PoE injector's LAN cable directly to your computer. 7. Start tftp client and issue following commands: tftp> binary tftp> connect 192.168.1.20 tftp> put openwrt-ar71xx-generic-ubnt-bullet-m-xw-squashfs-factory.bin Tested only on Bullet M2HP. Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
parent
6009b3fd58
commit
0f8cdc28af
@ -179,6 +179,7 @@ bsb)
|
||||
ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1"
|
||||
;;
|
||||
bullet-m|\
|
||||
bullet-m-xw|\
|
||||
loco-m-xw|\
|
||||
nanostation-m|\
|
||||
nanostation-m-xw|\
|
||||
|
@ -68,6 +68,7 @@ ar71xx_setup_interfaces()
|
||||
ap91-5g|\
|
||||
aw-nr580|\
|
||||
bullet-m|\
|
||||
bullet-m-xw|\
|
||||
c-55|\
|
||||
cap324|\
|
||||
cap4200ag|\
|
||||
|
@ -129,6 +129,7 @@ get_status_led() {
|
||||
status_led="$board:red:sys"
|
||||
;;
|
||||
bullet-m|\
|
||||
bullet-m-xw|\
|
||||
loco-m-xw|\
|
||||
nano-m|\
|
||||
nanostation-m|\
|
||||
|
@ -530,6 +530,9 @@ ar71xx_board_detect() {
|
||||
name="bullet-m"
|
||||
ubnt_xm_board_detect
|
||||
;;
|
||||
*"Bullet M XW")
|
||||
name="bullet-m-xw"
|
||||
;;
|
||||
*"BXU2000n-2 rev. A1")
|
||||
name="bxu2000n-2-a1"
|
||||
;;
|
||||
|
@ -218,6 +218,7 @@ platform_check_image() {
|
||||
archer-c7-v4|\
|
||||
archer-c7-v5|\
|
||||
bullet-m|\
|
||||
bullet-m-xw|\
|
||||
c-55|\
|
||||
carambola2|\
|
||||
cf-e316n-v2|\
|
||||
|
@ -656,6 +656,9 @@ MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
|
||||
MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
|
||||
ubnt_rocket_m_xw_setup);
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M_XW, "UBNT-BM-XW", "Ubiquiti Bullet M XW",
|
||||
ubnt_rocket_m_xw_setup);
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
|
||||
ubnt_rocket_m_ti_setup);
|
||||
|
||||
|
@ -321,6 +321,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */
|
||||
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
|
||||
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
|
||||
ATH79_MACH_UBNT_BULLET_M_XW, /* Ubiquiti Bullet M XW */
|
||||
ATH79_MACH_UBNT_LBE_M5, /* Ubiquiti Litebeam M5 */
|
||||
ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
|
||||
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
|
||||
|
@ -188,6 +188,13 @@ define Device/ubnt-loco-m-xw
|
||||
endef
|
||||
TARGET_DEVICES += ubnt-loco-m-xw
|
||||
|
||||
define Device/ubnt-bullet-m-xw
|
||||
$(Device/ubnt-xw)
|
||||
DEVICE_TITLE := Ubiquiti Bullet-M XW
|
||||
BOARDNAME := UBNT-BM-XW
|
||||
endef
|
||||
TARGET_DEVICES += ubnt-bullet-m-xw
|
||||
|
||||
define Device/ubnt-rocket-m-xw
|
||||
$(Device/ubnt-xw)
|
||||
DEVICE_TITLE := Ubiquiti Rocket M XW
|
||||
|
Loading…
Reference in New Issue
Block a user