ramips: add support for Motorola MWR03
Specifications: * SOC: MT7628AN + MT7612E * ROM: 8 MiB Flash * RAM: 64 MiB DDR2 * WAN: 10/100M *1 * LAN: 10/100M *3 * Button: Reset *1 * LEDs: orange *1, white *1 * Antennas: 2.4 GHz *2 + 5 GHz *2 * TTL Baudrate: 57600 * TFTP Upgrade: IP: 192.168.51.1, Server: 192.168.51.100 MAC addresses as verified by OEM firmware: use address source 2g *:d8 factory 0x0004 (label) 5g *:d9 factory 0x8004 LAN *:d7 factory $label -1 WAN *:da factory $label +2 Installation (TFTP + U-Boot): * Connect device with a TTL cable and open a serial session by PuTTY. * Press "2" when booting to select "Load system code then write to Flash via TFTP". * Configure the IP of local host server. * Upload firmware by tftpd64, it will boot when write instruction is executed. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [fix DTS line endings, fix label MAC address, adjust status LED names, convert mtd-mac-address-increment to mac-address-increment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Shiji Yang
Adrian Schmutzler
parent
fcc075e12f
commit
09143282bd
141
target/linux/ramips/dts/mt7628an_motorola_mwr03.dts
Normal file
141
target/linux/ramips/dts/mt7628an_motorola_mwr03.dts
Normal file
@ -0,0 +1,141 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Motorola MWR03";
|
||||
compatible = "motorola,mwr03", "mediatek,mt7628an-soc";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_orange;
|
||||
led-failsafe = &led_status_orange;
|
||||
led-running = &led_status_white;
|
||||
led-upgrade = &led_status_orange;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_orange: status_orange {
|
||||
label = "orange:status";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_white: status_white {
|
||||
label = "white:status";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <80000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bootloader";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "i2s";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(-1)>;
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x3e>;
|
||||
mediatek,portdisable = <0x30>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
};
|
||||
@ -278,6 +278,14 @@ define Device/minew_g1-c
|
||||
endef
|
||||
TARGET_DEVICES += minew_g1-c
|
||||
|
||||
define Device/motorola_mwr03
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Motorola
|
||||
DEVICE_MODEL := MWR03
|
||||
DEVICE_PACKAGES := kmod-mt76x2
|
||||
endef
|
||||
TARGET_DEVICES += motorola_mwr03
|
||||
|
||||
define Device/netgear_r6020
|
||||
$(Device/netgear_sercomm_nor)
|
||||
IMAGE_SIZE := 7104k
|
||||
|
||||
@ -109,6 +109,10 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "6@eth0"
|
||||
;;
|
||||
motorola,mwr03)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "0:wan" "6@eth0"
|
||||
;;
|
||||
netgear,r6020|\
|
||||
netgear,r6080|\
|
||||
netgear,r6120)
|
||||
@ -216,6 +220,10 @@ ramips_setup_macs()
|
||||
mercury,mac1200r-v2)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
|
||||
;;
|
||||
motorola,mwr03)
|
||||
label_mac=$(mtd_get_mac_binary factory 0x4)
|
||||
wan_mac=$(macaddr_add "$label_mac" 2)
|
||||
;;
|
||||
onion,omega2|\
|
||||
onion,omega2p|\
|
||||
vocore,vocore2|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user