openwrt/target/linux/s3c24xx/patches/0190-fix-lis302dl-resume-and-init-reload-boot-coefficient.patch

From d0c3a8bdfe2722f00b5ec7812500fbf1f6229b9f Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Fri, 25 Jul 2008 23:06:16 +0100
Subject: [PATCH] fix-lis302dl-resume-and-init-reload-boot-coefficients.patch
 Reported-by: John Lee <john_lee@openmoko.com>

We don't reset the devices either at init or resume, where init
means use the BOOT bit to reload device calibration coefficients
from internal EEPROM.  John Lee saw brain-damaged behaviour after
resume and sometimes after boot (since it may not have lost power
to force a BOOT itself that makes sense).

This patch

 - adds a diagnostic dump feature down /sys
 - forces BOOT action on init and resume, and waits for
   completion
 - makes sure XYZ capture is enabled on resume
 - adds some constants in the .h and removes some magic numbers
   in the code by using them

Signed-off-by: Andy Green <andy@openmoko.com>
---
 drivers/input/misc/lis302dl.c |   78 +++++++++++++++++++++++++++++++++++++++--
 include/linux/lis302dl.h      |    9 +++++
 2 files changed, 84 insertions(+), 3 deletions(-)

diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c
index 1d19418..553a731 100644
--- a/drivers/input/misc/lis302dl.c
+++ b/drivers/input/misc/lis302dl.c
@@ -221,9 +221,37 @@ static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
 
+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct lis302dl_info *lis = dev_get_drvdata(dev);
+	int n = 0;
+	u8 reg[0x40];
+	char *end = buf;
+	unsigned long flags;
+
+	local_save_flags(flags);
+
+	for (n = 0; n < sizeof(reg); n++)
+		reg[n] = reg_read(lis, n);
+
+	local_irq_restore(flags);
+
+	for (n = 0; n < sizeof(reg); n += 16) {
+		hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
+		end += strlen(end);
+		*end++ = '\n';
+		*end++ = '\0';
+	}
+
+	return end - buf;
+}
+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
+
 static struct attribute *lis302dl_sysfs_entries[] = {
 	&dev_attr_sample_rate.attr,
 	&dev_attr_full_scale.attr,
+	&dev_attr_dump.attr,
 	NULL
 };
 
@@ -276,6 +304,24 @@ static void lis302dl_input_close(struct input_dev *inp)
 	local_irq_restore(flags);
 }
 
+/* get the device to reload its coefficients from EEPROM and wait for it
+ * to complete
+ */
+
+static int __lis302dl_reset_device(struct lis302dl_info *lis)
+{
+	int timeout = 10;
+
+	reg_write(lis, LIS302DL_REG_CTRL2, LIS302DL_CTRL2_BOOT |
+							    LIS302DL_CTRL2_FDS);
+
+	while ((reg_read(lis, LIS302DL_REG_CTRL2) & LIS302DL_CTRL2_BOOT) &&
+								    (timeout--))
+		mdelay(1);
+
+	return !!(timeout < 0);
+}
+
 static int __devinit lis302dl_probe(struct spi_device *spi)
 {
 	int rc;
@@ -347,12 +393,24 @@ static int __devinit lis302dl_probe(struct spi_device *spi)
 		goto bail_inp_dev;
 	}
 
-	reg_write(lis, LIS302DL_REG_CTRL1, 0x47);
-	reg_write(lis, LIS302DL_REG_CTRL3, 0xc0);
+	if (__lis302dl_reset_device(lis))
+		dev_err(&spi->dev, "device BOOT reload failed\n");
+
+	/* force us powered */
+	reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
+					   LIS302DL_CTRL1_Xen |
+					   LIS302DL_CTRL1_Yen |
+					   LIS302DL_CTRL1_Zen);
+	mdelay(1);
+
+	reg_write(lis, LIS302DL_REG_CTRL2, 0);
+	reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_PP_OD |
+							    LIS302DL_CTRL3_IHL);
 	reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x14);
 	reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
 	reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x95);
 
+	/* start off in powered down mode; we power up when someone opens us */
 	reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
 					   LIS302DL_CTRL1_Yen |
 			 		   LIS302DL_CTRL1_Zen);
@@ -494,8 +552,22 @@ static int lis302dl_resume(struct spi_device *spi)
 	/* get our IO to the device back in operational states */
 	(lis->pdata->lis302dl_suspend_io)(lis, 1);
 
+	/* resume from powerdown first! */
+	reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
+					   LIS302DL_CTRL1_Xen |
+					   LIS302DL_CTRL1_Yen |
+					   LIS302DL_CTRL1_Zen);
+	mdelay(1);
+
+	if (__lis302dl_reset_device(lis))
+		dev_err(&spi->dev, "device BOOT reload failed\n");
+
 	/* restore registers after resume */
-	reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1]);
+	reg_write(lis, LIS302DL_REG_CTRL1, lis->regs[LIS302DL_REG_CTRL1] |
+						LIS302DL_CTRL1_PD |
+						LIS302DL_CTRL1_Xen |
+						LIS302DL_CTRL1_Yen |
+						LIS302DL_CTRL1_Zen);
 	reg_write(lis, LIS302DL_REG_CTRL2, lis->regs[LIS302DL_REG_CTRL2]);
 	reg_write(lis, LIS302DL_REG_CTRL3, lis->regs[LIS302DL_REG_CTRL3]);
 	reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h
index 0d6b4c4..4d8ded9 100644
--- a/include/linux/lis302dl.h
+++ b/include/linux/lis302dl.h
@@ -66,6 +66,15 @@ enum lis302dl_reg_ctrl1 {
 	LIS302DL_CTRL1_DR		= 0x80,
 };
 
+enum lis302dl_reg_ctrl2 {
+	LIS302DL_CTRL2_HPC1		= 0x01,
+	LIS302DL_CTRL2_HPC2		= 0x02,
+	LIS302DL_CTRL2_HPFF1		= 0x04,
+	LIS302DL_CTRL2_HPFF2		= 0x08,
+	LIS302DL_CTRL2_FDS		= 0x10,
+	LIS302DL_CTRL2_BOOT		= 0x40,
+	LIS302DL_CTRL2_SIM		= 0x80,
+};
 enum lis302dl_reg_ctrl3 {
 	LIS302DL_CTRL3_PP_OD		= 0x40,
 	LIS302DL_CTRL3_IHL		= 0x80,
-- 
1.5.6.3