Nicolass Iooss reports that when building with "clang -Wwrite-strings",
the compiler complains about initializing the char* array
genhomedirconargv with literal strings.
Make genhomedirconargv an array of pointers to const char and cast it
as non-const when assigning it to argv.
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
Fix missing and surplus commas. Fix the following formatting errors:
.BR selinux(8)
renders the the "(8)" in bold as well as the "selinux". This is wrong.
.B selinux
(8)
renders with a space between "selinux" and "(8)", this is wrong.
.B selinux (8)
commits both of the above mistakes.
.BR selinux (8), apparmor (8)
omits the space separating "selinux(8)," and "apparmor(8)", this is wrong.
Correct all the above using the following markup:
.BR selinux (8),
.BR apparmor (8)
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Users are confused that this option is not documented or that
'semodule -q' doesn't show:
semodule: invalid option -- 'q'
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
It wasn't clear how to use -l option with full/standard KIND and the
example in semodule.8 man page was wrong.
Based on a patch by Laurent Bigonville <bigon@bigon.be>
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
The man page's example suggested to use -g instead of -E and used --cil
and --hll options on the wrong positions.
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
Add --extract/-E, --cil/-c, and --hll/-H to extract modules. If -c/-H
are not provided, the module will be output as HLL by default. Only
--cil or --hll (which will use the lang_ext in the semodule store) are valid
options to use with -E. The module is written to the current working directory
as <module_name>.<lang_ext>.
If a module exists as HLL and is exported as CIL, it will first compile into
CIL and cache to the module store. Once compiled, exporting will
continue.
If no priority is provided when extracting a module, then extraction at
the default priority, 400, will be attempted. If the module does not
exist at the default priority, then it will be exported at the highest
existing priority.
Examples:
Extract the wireshark module in a .cil format. If the module only exists
as HLL on the system, the module will be compiled into CIL and placed
into the module store. This command will then write wireshark.cil to the CWD.
semodule --cil --extract wireshark
Extract the wireshark module in HLL format. Since the original HLL file
was a policy package, a wireshark.pp will be written to the CWD.
semodule -E wireshark
Extract the wireshark module as CIL and HLL and extract the puppet
module as CIL at priority 400.
semodule --hll -E wireshark --cil -E wireshark -X 400 --cil -E puppet
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
Add a new -S option to semodule. This option overrides store_root
in semanage.conf and sets the SELinux store's root path. If neither -S,
nor store_root are specified in semanage.conf, then the default
location is used.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Providing --ignore-module-cache will cause the recompilating of all HLL
modules, and recaching of the resulting CIL files.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
Providing --upgrade or --base will now just call --install, and display
a deprecation message to the user. Additionally, because CIL has no
concept of version numbers, this removes the version output from --list.
Signed-off-by: Yuli Khodorkovskiy <ykhodorkovskiy@tresys.com>
This updates the semodule tool with the ability to set the priority for
commands, to enable/disable modules, and extended module listing options
for displaying extra module information (e.g., priority, enabled status,
and language extension).
[semodule priority]
-X --priority set the priority for following operations
Notes:
* This sets the priority for the following operations.
* It can be used any number of times with its effect continuing until
the next priority is specified.
* The default priority is used if no priority has yet been specified.
Impact on current operations:
* Install module
* Without priority - Install at default priority.
* With priority - Install at specified priority.
* New warning when overriding (issued by libsemanage).
* Upgrade module
* Without priority - Upgrade at default priority (current upgrade
semantics apply).
* With priority - Upgrade at specified priority (current upgrade
semantics apply).
* New warning when overriding (issued by libsemanage).
* Remove module
* Without priority - Remove a module at the default if exists.
* With priority - Remove at that priority.
* New info messages (issued by libsemanage):
* If no modules exist at the given priority but do exist at other
priorities, give an info message listing the modules and priority.
* If a new module at a lower priority will become active print a
message.
* If the last module with this name is being removed print a
message.
* Base
* The name of base module on install is fixed to "_base" (performed by
libsemanage).
* Without priority - Install at default priority.
* With priority - Install at specified priority.
* New warning when overriding (issued by libsemanage).
* List modules
* See listing changes below.
Examples:
semodule -i foo.pp
semodule -X 500 -i foo.pp
[semodule enable/disable]
Add enable/disable status:
-e --enable enable the module (at all priorities)
-d --disable disable the module (at all priorities)
Notes:
* Base modules are always enabled and cannot have their enabled/disabled
status changed.
* New error when disabling a base module (from libsemanage).
* New warning when enabling a base module (from libsemanage).
Impact on current operations:
* Install module
* If a module with that name is already installed, then the enabled
status will remain the same after installing the new module.
* New warning when installing a module which will be disabled by
existing enabled status (from libsemanage).
* Upgrade module
* If a module with that name is already installed, then the enabled
status will remain the same after installing the new module.
* New warning when installing a module which will be disabled by
existing enabled status (from libsemanage).
* Remove module
* When the last module with a given name is removed (no more exist at
other priorities) then the enabled status is forgotten.
* Base
* Base modules are always installed enabled and remain so (can't be
disabled).
* List modules
* See listing changes below.
Examples:
semodule -e foo
semodule -d foo
[semodule list]
-l --list list modules as if by -lstandard
-lstandard --list=standard list name and version of highest priority,
enabled, non-base modules sorted alphabetical
by name
-lfull --list=full list all fields of all modules columnated
sorted high priority to low, within priority
alphabetical by name
Impact on current operations:
* List modules
* Default listing stays the same.
* New long options for 'standard' and 'full'.
Examples:
semodule -l
semodule -lstandard
semodule --list=standard
alsa 1.7.1
apm 1.9.1
apt 1.5.2
authlogin 2.0.0
avahi 1.10.3
bluetooth 3.1.3
...
semodule -lfull
semodule --list=full
600 alsa 1.7.1 disabled pp
400 _base 1.0.0 pp
400 alsa 1.7.1 disabled pp
400 apm 1.9.1 pp
400 apt 1.5.2 pp
400 authlogin 2.0.0 pp
...
100 alsa 1.7.1 disabled pp
Signed-off-by: Chad Sellers <csellers@tresys.com>
The semodule_path file, inside scripts, which is used to tell the
Makefile where genhomedircon should point to find semodule, was not
being updated. This patch makes sure we update this file every time
something builds, thus genhomedircon doesn't point to some wild out of
data file location.
Signed-off-by: Eric Paris <eparis@redhat.com>
It dynamically creates the policycoreutils "genhomedircon"
script during the build process in order not to hard-code
the full path to the semodule executable, as in general the
latter could reside in non-standard SBINDIR/USRSBINDIR
locations.
It might not be very stylish or it might appear cumbersome,
but at least the script should not break as easily as the
current static one.
The patch also edits the Makefile for the scripts so that
LOCALEDIR correctly uses $(PREFIX) rather than an absolute
path.
Signed-off-by: Guido Trentalancia <guido@trentalancia.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This makes semodule consistent with other commands to no reload the
policy into the kernel after the given change.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Dan Walsh <dwalsh@redhat.com>
This is purely personal preference. Most of the Makefiles use $() for
Makefile variables, but a couple of places use ${}. Since this obscured
some later Makefile changes I figured I'd just make them all the same up
front.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Dan Walsh <dwalsh@redhat.com>
By default only the effective branch of a tunable conditional would be
expanded and written to raw policy, while all needless unused branches
would be discarded.
Add a new option '-P' or "--preserve_tunables" to the semodule program.
By default it is 0, if set to 1 then the above preserve_tunables flag
in the sepol_handle_t would be set to 1 accordingly.
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Dan Walsh <dwalsh@redhat.com>
Add a -p option to semodule which will allow it to operate on the
specified semanaged root instead of the default.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Dan Walsh <dwalsh@redhat.com>
Basically it makes semodule -u file.pp, install file.pp if it does not exist. This matches the rpm syntax, and allows us too update/install many packages with a transaction without know whether the package is updated or installed.
Currently we can only do a -i which could hammer a newwer version.
commit 3a5ed0fdf42200d0efd6cb1064eab91d2eb5ca52
Author: Dan Walsh <dwalsh@redhat.com>
Date: Mon Aug 24 11:36:41 2009 -0400
i Upgrade patch
Patch for semodule command
semodule -B
Will now turn on dontaudit rules
semodule -DB
Will turn off dontaudit rules.
With other patch all other semanage commands will maintain state.
Created by Dan Walsh
Signed-off-by: Christopher Pardy <cpardy@redhat.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Email: dwalsh@redhat.com
Subject: Make removing of a module a warning rather then an error.
Date: Tue, 13 Jan 2009 08:57:17 -0500
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
This way if I say a command line
semodule -r mypol -i newmypol
and mypol was not there the semodule command does not error out.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iEYEARECAAYFAklsnb0ACgkQrlYvE4MpobNwFACfTqc17wREKC2aAhLOIkfbqgeg
GxgAn2/ZBz5ljtyK1aiVkqoCBj98y9Ey
=I4uX
-----END PGP SIGNATURE-----
Signed-off-by: Joshua Brindle <method@manicmethod.com>
James Carter
Alan Jenkins
Petr Lautrbach
Ville Skyttä
Yuli Khodorkovskiy
Steve Lawrence
Caleb Case
Dan Walsh
Stephen Smalley
Eric Paris
Guido Trentalancia
Harry Ciao
Christopher Pardy
Joshua Brindle