* remote-write: slow down retries to avoid DDOS
Increase the default max retry time from 100ms to 5 seconds.
Remote write calls are retried after a recoverable error such as the
back-end returning 500. Prometheus waits the minimum time and retries,
then doubles the wait on each subsequent retry until the maximum is
reached.
If some data is still getting through, remote-write will also increase
shards, and the default maximum is 200. 200 shards sending every 100ms
is 20 calls per second, to a back-end that is already in trouble.
5 seconds was chosen to match the default BatchSendDeadline: if we can
afford to wait that long for no response, then we can wait the same time
to retry. We will reach 5 seconds after 9 successive failures.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update config doc for max_backoff change
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
This PR fixes the tests in main. The last merge introduced a failing
test in the config package.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
We have been Puppet user for 10 years and we are users of
https://github.com/camptocamp/prometheus-puppetdb-sd
However, that file_sd implementation contains business logic and
assumptions around e.g. the modules which you are using.
This pull request adds a simple PuppetDB service discovery, which will
enable more use cases than the upstream sd.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Create experimental circular buffer resize method, benchmarks
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Optimize exemplar resize to only replay as many exemplars as needed
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* More comments, benchmark AddExemplar
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* optimizations
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* comment
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Slight refactor of resize benchmark + make use of resize via runtime
reloadable storage config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Some more config related changes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor to remove usage of noopExemplarStorage and avoid race condition
when resizing from Head code.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix or add comments to clarify some of the new behaviour.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix potential panics related to negative exemplar buffer lengths
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Callum Styan <callumstyan@gmail.com>
* Added MaxSamplesPerSend
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed order of require
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added docs
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* writes -> writesReceived
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Improved send loop
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
* scrape: add label limits per scrape
Add three new limits to the scrape configuration to provide some
mechanism to defend against unbound number of labels and excessive
label lengths. If any of these limits are broken by a sample from a
scrape, the whole scrape will fail. For all of these configuration
options, a zero value means no limit.
The `label_limit` configuration will provide a mechanism to bound the
number of labels per-scrape of a certain sample to a user defined limit.
This limit will be tested against the sample labels plus the discovery
labels, but it will exclude the __name__ from the count since it is a
mandatory Prometheus label to which applying constraints isn't
meaningful.
The `label_name_length_limit` and `label_value_length_limit` will
prevent having labels of excessive lengths. These limits also skip the
__name__ label for the same reasons as the `label_limit` option and will
also make the scrape fail if any sample has a label name/value length
that exceed the predefined limits.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: add metrics and alert to label limits
Add three gauge, one for each label limit to easily access the
limit set by a certain scrape target.
Also add a counter to count the number of targets that exceeded the
label limits and thus were dropped. This is useful for the
`PrometheusLabelLimitHit` alert that will notify the users that scraping
some targets failed because they had samples exceeding the label limits
defined in the scrape configuration.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: apply label limits to __name__ label
Apply limits to the __name__ label that was previously skipped and
truncate the label names and values in the error messages as they can be
very very long.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: remove label limits gauges and refactor
Remove `prometheus_target_scrape_pool_label_limit`,
`prometheus_target_scrape_pool_label_name_length_limit`, and
`prometheus_target_scrape_pool_label_value_length_limit` as they are not
really useful since we don't have the information on the labels in it.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
The merge of 8761 did not catch that the secrets were off by one
because it was not rebased on top of 8693.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This makes it clear that the dockerswarm package does more than docker
swarm, but does also docker.
I have picked moby as it is the upstream name: https://mobyproject.org/
There is no user-facing change, except in the case of a bad
configuration. Previously, a user who would have a bad docker sd config
would see an error like:
> field xx not found in type dockerswarm.plain
Now that error would be turned into:
> field xx not found in type moby.plain
While not perfect, it should at not be confusing between docker and
dockerswarm.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Prometheus adds the ability to read secrets from files. This add
this feature for the scaleway service discovery.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Contribute grafana/agent sigv4 code
* address review feedback
- move validation logic for RemoteWrite into unmarshal
- copy configuration fields from ec2 SD config
- remove enabled field, use pointer for enabling sigv4
* Update config/config.go
* Don't provide credentials if secret key / access key left blank
* Add SigV4 headers to the list of unchangeable headers.
* sigv4: don't include all headers in signature
* only test for equality in the authorization header, not the signed date
* address review feedback
1. s/httpClientConfigEnabled/httpClientConfigAuthEnabled
2. bearer_token tuples to "authorization"
3. Un-export NewSigV4RoundTripper
* add x-amz-content-sha256 to list of unchangeable headers
* Document sigv4 configuration
* add suggestion for using default AWS SDK credentials
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@gmail.com>
This PR introduces support for follow_redirect, to enable users to
disable following HTTP redirects.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Label selector can be
"set-based"(https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#set-based-requirement)
but such a selector causes Prometheus start failure with the "unexpected
error: parsing YAML file ...: invalid selector: 'foo in (bar,baz)';
can't understand 'baz)'"-like error.
This is caused by the `fields.ParseSelector(string)` function that
simply splits an expression as a CSV-list, so a comma confuses such a
parsing method and lead to the error.
Use `labels.Parse(string)` to use a valid lexer to parse a selector
expression.
Closes#8284.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
