mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2024-12-22 22:54:06 +00:00
20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
322 lines
8.4 KiB
Diff
322 lines
8.4 KiB
Diff
From dadc749c5ccc320127871d7c3ace51a7fae479a7 Mon Sep 17 00:00:00 2001
|
|
From: nmbath <mark@baggywrinkle.co.uk>
|
|
Date: Thu, 24 Feb 2022 13:10:01 +0000
|
|
Subject: [PATCH] overlays: Overlays for WaveShare 2-Chan CAN FD HAT
|
|
|
|
This patch adds the overlays for the Waveshare 2-Channel Isolated
|
|
CAN FD Expansion HAT for Raspberry Pi, Multi Protections. This HAT
|
|
is based on the mcp2518fd chip and can be run in two modes
|
|
|
|
Mode A: can0 on spi0.0 and can1 on spi1.0 (cs = pin 26)
|
|
Mode B: can1 on spi0.0 and can1 in spi0.1
|
|
|
|
Interupts: can0 pin 25 / can1 pin 16
|
|
|
|
https://www.waveshare.com/2-ch-can-fd-hat.htm
|
|
|
|
Overlays generated by:
|
|
Mode A: ovmerge -c spi1-1cs-overlay.dts,cs0_pin=26,cs0_spidev=false \
|
|
mcp251xfd-overlay.dts,spi0-0,interrupt=25 \
|
|
mcp251xfd-overlay.dts,spi1-0,interrupt=16
|
|
|
|
Mode B: ovmerge -c mcp251xfd-overlay.dts,spi0-0,interrupt=25 \
|
|
mcp251xfd-overlay.dts,spi0-1,interrupt=16
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 2 +
|
|
arch/arm/boot/dts/overlays/README | 20 +++
|
|
.../waveshare-can-fd-hat-mode-a-overlay.dts | 140 ++++++++++++++++++
|
|
.../waveshare-can-fd-hat-mode-b-overlay.dts | 103 +++++++++++++
|
|
4 files changed, 265 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-a-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-b-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -251,6 +251,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
w1-gpio.dtbo \
|
|
w1-gpio-pullup.dtbo \
|
|
w5500.dtbo \
|
|
+ waveshare-can-fd-hat-mode-a.dtbo \
|
|
+ waveshare-can-fd-hat-mode-b.dtbo \
|
|
wittypi.dtbo \
|
|
wm8960-soundcard.dtbo
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -3879,6 +3879,26 @@ Params: int_pin GPIO use
|
|
cs SPI bus Chip Select (default 0)
|
|
|
|
|
|
+Name: waveshare-can-fd-hat-mode-a
|
|
+Info: Overlay for the Waveshare 2-Channel Isolated CAN FD Expansion HAT
|
|
+ for Raspberry Pi, Multi Protections. Use this overlay when the
|
|
+ HAT is configured in Mode A (Default), with can0 on spi0.0
|
|
+ and can1 on spi1.0.
|
|
+ https://www.waveshare.com/2-ch-can-fd-hat.htm
|
|
+Load: dtoverlay=waveshare-can-fd-hat-mode-a
|
|
+Params: <None>
|
|
+
|
|
+
|
|
+Name: waveshare-can-fd-hat-mode-b
|
|
+Info: Overlay for the Waveshare 2-Channel Isolated CAN FD Expansion HAT
|
|
+ for Raspberry Pi, Multi Protections. Use this overlay when the
|
|
+ HAT is configured in Mode B (requires hardware modification), with
|
|
+ can0 on spi0.0 and can1 on spi0.1.
|
|
+ https://www.waveshare.com/2-ch-can-fd-hat.htm
|
|
+Load: dtoverlay=waveshare-can-fd-hat-mode-b
|
|
+Params: <None>
|
|
+
|
|
+
|
|
Name: wittypi
|
|
Info: Configures the wittypi RTC module.
|
|
Load: dtoverlay=wittypi,<param>=<val>
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-a-overlay.dts
|
|
@@ -0,0 +1,140 @@
|
|
+// redo: ovmerge -c spi1-1cs-overlay.dts,cs0_pin=26,cs0_spidev=false mcp251xfd-overlay.dts,spi0-0,interrupt=25 mcp251xfd-overlay.dts,spi1-0,interrupt=16
|
|
+
|
|
+// Device tree overlay for https://www.waveshare.com/2-ch-can-fd-hat.htm
|
|
+// in "Mode A" (default) configuration
|
|
+// for details see https://www.waveshare.com/wiki/2-CH_CAN_FD_HAT
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/interrupt-controller/irq.h>
|
|
+#include <dt-bindings/pinctrl/bcm2835.h>
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835";
|
|
+ fragment@0 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ spi1_pins: spi1_pins {
|
|
+ brcm,pins = <19 20 21>;
|
|
+ brcm,function = <3>;
|
|
+ };
|
|
+ spi1_cs_pins: spi1_cs_pins {
|
|
+ brcm,pins = <26>;
|
|
+ brcm,function = <1>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@1 {
|
|
+ target = <&spi1>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
|
|
+ cs-gpios = <&gpio 26 1>;
|
|
+ status = "okay";
|
|
+ spidev@0 {
|
|
+ compatible = "spidev";
|
|
+ reg = <0>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@2 {
|
|
+ target = <&aux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+ fragment@3 {
|
|
+ target = <&spidev0>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+ fragment@4 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ mcp251xfd_pins: mcp251xfd_spi0_0_pins {
|
|
+ brcm,pins = <25>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_IN>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@5 {
|
|
+ target-path = "/clocks";
|
|
+ __overlay__ {
|
|
+ clk_mcp251xfd_osc: mcp251xfd-spi0-0-osc {
|
|
+ #clock-cells = <0>;
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <40000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@6 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ mcp251xfd@0 {
|
|
+ compatible = "microchip,mcp251xfd";
|
|
+ reg = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mcp251xfd_pins>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&clk_mcp251xfd_osc>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@7 {
|
|
+ target-path = "spi1/spidev@0";
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+ fragment@8 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ mcp251xfd_pins_1: mcp251xfd_spi1_0_pins {
|
|
+ brcm,pins = <16>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_IN>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@9 {
|
|
+ target-path = "/clocks";
|
|
+ __overlay__ {
|
|
+ clk_mcp251xfd_osc_1: mcp251xfd-spi1-0-osc {
|
|
+ #clock-cells = <0>;
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <40000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@10 {
|
|
+ target = <&spi1>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ mcp251xfd@0 {
|
|
+ compatible = "microchip,mcp251xfd";
|
|
+ reg = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mcp251xfd_pins_1>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&clk_mcp251xfd_osc_1>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-b-overlay.dts
|
|
@@ -0,0 +1,103 @@
|
|
+// redo: ovmerge -c mcp251xfd-overlay.dts,spi0-0,interrupt=25 mcp251xfd-overlay.dts,spi0-1,interrupt=16
|
|
+
|
|
+// Device tree overlay for https://www.waveshare.com/2-ch-can-fd-hat.htm
|
|
+// in "Mode B" (requried hardware modification) configuration
|
|
+// for details see https://www.waveshare.com/wiki/2-CH_CAN_FD_HAT
|
|
+
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/interrupt-controller/irq.h>
|
|
+#include <dt-bindings/pinctrl/bcm2835.h>
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835";
|
|
+ fragment@0 {
|
|
+ target = <&spidev0>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+ fragment@1 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ mcp251xfd_pins: mcp251xfd_spi0_0_pins {
|
|
+ brcm,pins = <25>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_IN>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@2 {
|
|
+ target-path = "/clocks";
|
|
+ __overlay__ {
|
|
+ clk_mcp251xfd_osc: mcp251xfd-spi0-0-osc {
|
|
+ #clock-cells = <0>;
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <40000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@3 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ mcp251xfd@0 {
|
|
+ compatible = "microchip,mcp251xfd";
|
|
+ reg = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mcp251xfd_pins>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&clk_mcp251xfd_osc>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@4 {
|
|
+ target = <&spidev1>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+ fragment@5 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ mcp251xfd_pins_1: mcp251xfd_spi0_1_pins {
|
|
+ brcm,pins = <16>;
|
|
+ brcm,function = <BCM2835_FSEL_GPIO_IN>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@6 {
|
|
+ target-path = "/clocks";
|
|
+ __overlay__ {
|
|
+ clk_mcp251xfd_osc_1: mcp251xfd-spi0-1-osc {
|
|
+ #clock-cells = <0>;
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <40000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ fragment@7 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ mcp251xfd@1 {
|
|
+ compatible = "microchip,mcp251xfd";
|
|
+ reg = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mcp251xfd_pins_1>;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&clk_mcp251xfd_osc_1>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|