RepoMirrors/openwrt
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2024-12-16 03:44:39 +00:00
Code Issues Packages Projects Releases Wiki Activity
fdfa6fdbcd
openwrt/package/mac80211/patches/582-ath9k_merge_reset_functions.patch
Felix Fietkau f24b8561d4 ath9k: fix some hw reset issues 
SVN-Revision: 28151
2011-09-03 03:27:20 +00:00

449 lines
12 KiB
Diff
Raw Blame History

--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -212,84 +212,57 @@ static int ath_update_survey_stats(struc
return ret;
}
-/*
- * Set/change channels. If the channel is really being changed, it's done
- * by reseting the chip. To accomplish this we must first cleanup any pending
- * DMA, then restart stuff.
-*/
-static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
- struct ath9k_channel *hchan)
+static void __ath_cancel_work(struct ath_softc *sc)
{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_conf *conf = &common->hw->conf;
- bool fastcc = true, stopped;
- struct ieee80211_channel *channel = hw->conf.channel;
- struct ath9k_hw_cal_data *caldata = NULL;
- int r;
-
- if (sc->sc_flags & SC_OP_INVALID)
- return -EIO;
-
- sc->hw_busy_count = 0;
-
- del_timer_sync(&common->ani.timer);
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
- cancel_work_sync(&sc->hw_reset_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
+}
- ath9k_ps_wakeup(sc);
+static void ath_cancel_work(struct ath_softc *sc)
+{
+ __ath_cancel_work(sc);
+ cancel_work_sync(&sc->hw_reset_work);
+}
- spin_lock_bh(&sc->sc_pcu_lock);
+static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ bool ret;
- /*
- * This is only performed if the channel settings have
- * actually changed.
- *
- * To switch channels clear any pending DMA operations;
- * wait long enough for the RX fifo to drain, reset the
- * hardware at the new frequency, and then re-enable
- * the relevant bits of the h/w.
- */
- ath9k_hw_disable_interrupts(ah);
- stopped = ath_drain_all_txq(sc, false);
+ ieee80211_stop_queues(sc->hw);
- if (!ath_stoprecv(sc))
- stopped = false;
+ sc->hw_busy_count = 0;
+ del_timer_sync(&common->ani.timer);
- if (!ath9k_hw_check_alive(ah))
- stopped = false;
+ ath9k_hw_disable_interrupts(ah);
- /* XXX: do not flush receive queue here. We don't want
- * to flush data frames already in queue because of
- * changing channel. */
+ ret = ath_drain_all_txq(sc, retry_tx);
- if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
- fastcc = false;
+ if (!ath_stoprecv(sc))
+ ret = false;
- if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
- caldata = &sc->caldata;
+ if (!flush) {
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
+ ath_rx_tasklet(sc, 0, true);
+ ath_rx_tasklet(sc, 0, false);
+ } else {
+ ath_flushrecv(sc);
+ }
- ath_dbg(common, ATH_DBG_CONFIG,
- "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
- sc->sc_ah->curchan->channel,
- channel->center_freq, conf_is_ht40(conf),
- fastcc);
+ return ret;
+}
- r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
- if (r) {
- ath_err(common,
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- goto ps_restore;
- }
+static bool ath_complete_reset(struct ath_softc *sc, bool start)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
if (ath_startrecv(sc) != 0) {
ath_err(common, "Unable to restart recv logic\n");
- r = -EIO;
- goto ps_restore;
+ return false;
}
ath9k_cmn_update_txpow(ah, sc->curtxpow,
@@ -297,21 +270,93 @@ static int ath_set_channel(struct ath_so
ath9k_hw_set_interrupts(ah, ah->imask);
ath9k_hw_enable_interrupts(ah);
- if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
+ if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) && start) {
if (sc->sc_flags & SC_OP_BEACONS)
ath_set_beacon(sc);
+
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
if (!common->disable_ani)
ath_start_ani(common);
}
- ps_restore:
- ieee80211_wake_queues(hw);
+ ieee80211_wake_queues(sc->hw);
+
+ return true;
+}
+
+static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
+ bool retry_tx)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_cal_data *caldata = NULL;
+ bool fastcc = true;
+ bool flush = false;
+ int r;
+
+ __ath_cancel_work(sc);
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+ if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) {
+ fastcc = false;
+ caldata = &sc->caldata;
+ }
+
+ if (!hchan) {
+ fastcc = false;
+ flush = true;
+ hchan = ah->curchan;
+ }
+
+ if (fastcc && !ath9k_hw_check_alive(ah))
+ fastcc = false;
+
+ if (!ath_prepare_reset(sc, retry_tx, flush))
+ fastcc = false;
+
+ ath_dbg(common, ATH_DBG_CONFIG,
+ "Reset to %u MHz, HT40: %d fastcc: %d\n",
+ hchan->channel, !!(hchan->channelFlags & (CHANNEL_HT40MINUS |
+ CHANNEL_HT40PLUS)),
+ fastcc);
+
+ r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
+ if (r) {
+ ath_err(common,
+ "Unable to reset channel, reset status %d\n", r);
+ goto out;
+ }
+
+ if (!ath_complete_reset(sc, true))
+ r = -EIO;
+
+out:
spin_unlock_bh(&sc->sc_pcu_lock);
+ return r;
+}
+
+
+/*
+ * Set/change channels. If the channel is really being changed, it's done
+ * by reseting the chip. To accomplish this we must first cleanup any pending
+ * DMA, then restart stuff.
+*/
+static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
+ struct ath9k_channel *hchan)
+{
+ int r;
+
+ if (sc->sc_flags & SC_OP_INVALID)
+ return -EIO;
+
+ ath9k_ps_wakeup(sc);
+
+ r = ath_reset_internal(sc, hchan, false);
ath9k_ps_restore(sc);
+
return r;
}
@@ -824,28 +869,13 @@ static void ath_radio_enable(struct ath_
channel->center_freq, r);
}
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
- sc->config.txpowlimit, &sc->curtxpow);
- if (ath_startrecv(sc) != 0) {
- ath_err(common, "Unable to restart recv logic\n");
- goto out;
- }
- if (sc->sc_flags & SC_OP_BEACONS)
- ath_set_beacon(sc); /* restart beacons */
-
- /* Re-Enable interrupts */
- ath9k_hw_set_interrupts(ah, ah->imask);
- ath9k_hw_enable_interrupts(ah);
+ ath_complete_reset(sc, true);
/* Enable LED */
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
- ieee80211_wake_queues(hw);
- ieee80211_queue_delayed_work(hw, &sc->hw_pll_work, HZ/2);
-
-out:
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
@@ -858,11 +888,10 @@ void ath_radio_disable(struct ath_softc
int r;
ath9k_ps_wakeup(sc);
- cancel_delayed_work_sync(&sc->hw_pll_work);
- spin_lock_bh(&sc->sc_pcu_lock);
+ ath_cancel_work(sc);
- ieee80211_stop_queues(hw);
+ spin_lock_bh(&sc->sc_pcu_lock);
/*
* Keep the LED on when the radio is disabled
@@ -873,13 +902,7 @@ void ath_radio_disable(struct ath_softc
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
- /* Disable interrupts */
- ath9k_hw_disable_interrupts(ah);
-
- ath_drain_all_txq(sc, false); /* clear pending tx frames */
-
- ath_stoprecv(sc); /* turn off frame recv */
- ath_flushrecv(sc); /* flush recv queue */
+ ath_prepare_reset(sc, false, true);
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
@@ -901,48 +924,11 @@ void ath_radio_disable(struct ath_softc
static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_hw *hw = sc->hw;
int r;
- sc->hw_busy_count = 0;
-
- /* Stop ANI */
-
- del_timer_sync(&common->ani.timer);
-
ath9k_ps_wakeup(sc);
- ieee80211_stop_queues(hw);
-
- ath9k_hw_disable_interrupts(ah);
- ath_drain_all_txq(sc, retry_tx);
-
- ath_stoprecv(sc);
- ath_flushrecv(sc);
-
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
- if (r)
- ath_err(common,
- "Unable to reset hardware; reset status %d\n", r);
-
- if (ath_startrecv(sc) != 0)
- ath_err(common, "Unable to start recv logic\n");
-
- /*
- * We may be doing a reset in response to a request
- * that changes the channel so update any state that
- * might change as a result.
- */
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
- sc->config.txpowlimit, &sc->curtxpow);
-
- if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
- ath_set_beacon(sc); /* restart beacons */
-
- ath9k_hw_set_interrupts(ah, ah->imask);
- ath9k_hw_enable_interrupts(ah);
+ r = ath_reset_internal(sc, NULL, retry_tx);
if (retry_tx) {
int i;
@@ -955,12 +941,6 @@ static int ath_reset(struct ath_softc *s
}
}
- ieee80211_wake_queues(hw);
-
- /* Start ANI */
- if (!common->disable_ani)
- ath_start_ani(common);
-
ath9k_ps_restore(sc);
return r;
@@ -970,9 +950,7 @@ void ath_reset_work(struct work_struct *
{
struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work);
- spin_lock_bh(&sc->sc_pcu_lock);
ath_reset(sc, true);
- spin_unlock_bh(&sc->sc_pcu_lock);
}
void ath_hw_check(struct work_struct *work)
@@ -993,11 +971,8 @@ void ath_hw_check(struct work_struct *wo
ath_dbg(common, ATH_DBG_RESET, "Possible baseband hang, "
"busy=%d (try %d)\n", busy, sc->hw_busy_count + 1);
if (busy >= 99) {
- if (++sc->hw_busy_count >= 3) {
- spin_lock_bh(&sc->sc_pcu_lock);
- ath_reset(sc, true);
- spin_unlock_bh(&sc->sc_pcu_lock);
- }
+ if (++sc->hw_busy_count >= 3)
+ ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
} else if (busy >= 0)
sc->hw_busy_count = 0;
@@ -1017,9 +992,7 @@ static void ath_hw_pll_rx_hang_check(str
/* Rx is hung for more than 500ms. Reset it */
ath_dbg(common, ATH_DBG_RESET,
"Possible RX hang, resetting");
- spin_lock_bh(&sc->sc_pcu_lock);
- ath_reset(sc, true);
- spin_unlock_bh(&sc->sc_pcu_lock);
+ ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
count = 0;
}
} else
@@ -1090,28 +1063,6 @@ static int ath9k_start(struct ieee80211_
goto mutex_unlock;
}
- /*
- * This is needed only to setup initial state
- * but it's best done after a reset.
- */
- ath9k_cmn_update_txpow(ah, sc->curtxpow,
- sc->config.txpowlimit, &sc->curtxpow);
-
- /*
- * Setup the hardware after reset:
- * The receive engine is set going.
- * Frame transmit is handled entirely
- * in the frame output path; there's nothing to do
- * here except setup the interrupt mask.
- */
- if (ath_startrecv(sc) != 0) {
- ath_err(common, "Unable to start recv logic\n");
- r = -EIO;
- spin_unlock_bh(&sc->sc_pcu_lock);
- goto mutex_unlock;
- }
- spin_unlock_bh(&sc->sc_pcu_lock);
-
/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN | ATH9K_INT_FATAL |
@@ -1134,12 +1085,14 @@ static int ath9k_start(struct ieee80211_
/* Disable BMISS interrupt when we're not associated */
ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
- ath9k_hw_set_interrupts(ah, ah->imask);
- ath9k_hw_enable_interrupts(ah);
- ieee80211_wake_queues(hw);
+ if (!ath_complete_reset(sc, false)) {
+ r = -EIO;
+ spin_unlock_bh(&sc->sc_pcu_lock);
+ goto mutex_unlock;
+ }
- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
+ spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
!ah->btcoex_hw.enabled) {
@@ -1232,11 +1185,7 @@ static void ath9k_stop(struct ieee80211_
mutex_lock(&sc->mutex);
- cancel_delayed_work_sync(&sc->tx_complete_work);
- cancel_delayed_work_sync(&sc->hw_pll_work);
- cancel_work_sync(&sc->paprd_work);
- cancel_work_sync(&sc->hw_check_work);
- cancel_work_sync(&sc->hw_reset_work);
+ ath_cancel_work(sc);
if (sc->sc_flags & SC_OP_INVALID) {
ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
@@ -2353,9 +2302,11 @@ static void ath9k_flush(struct ieee80211
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
drain_txq = ath_drain_all_txq(sc, false);
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
if (!drain_txq)
ath_reset(sc, false);
- spin_unlock_bh(&sc->sc_pcu_lock);
+
ath9k_ps_restore(sc);
ieee80211_wake_queues(hw);
Reference in New Issue View Git Blame Copy Permalink