Shiji Yang 0ffbef9317 ath79: add support for D-Link DIR-859 A3 ... Specifications: SOC: QCA9563 775 MHz + QCA9880 Switch: QCA8337N-AL3C RAM: Winbond W9751G6KB-25 64 MiB Flash: Winbond W25Q128FVSG 16 MiB WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3 LAN: LAN ports *4 WAN: WAN port *1 Buttons: reset *1 + wps *1 LEDs: ethernet *5, power, wlan, wps MAC Address: use address source1 source2 label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr lan 40:9b:xx:xx:xx:3c devdata@0x3f $label wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3 wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2 Install via Web UI: Apply factory image in the stock firmware's Web UI. Install via Emergency Room Mode: DIR-859 A1 will enter recovery mode when the system fails to boot or press reset button for about 10 seconds. First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1. Then we can open http://192.168.0.1 in the web browser to upload OpenWrt factory image or stock firmware. Some modern browsers may need to turn on compatibility mode. Signed-off-by: Shiji Yang <yangshiji66@qq.com>		2023-05-22 14:45:03 +02:00
..
base-files/etc/hotplug.d/ieee80211
dts	ath79: add support for D-Link DIR-859 A3	2023-05-22 14:45:03 +02:00
files	kernel: remove obsolete kernel version switches	2023-05-20 15:19:14 +02:00
generic	ath79: add support for D-Link DIR-859 A3	2023-05-22 14:45:03 +02:00
image	ath79: add support for D-Link DIR-859 A3	2023-05-22 14:45:03 +02:00
mikrotik	ath79: add support for MikroTik RB951Ui-2HnD	2023-05-16 14:55:18 +02:00
nand	ath79: add Cisco Meraki MR18	2023-05-14 00:08:35 +02:00
patches-5.15
tiny
config-5.15
Makefile
modules.mk