openwrt/target/linux/cns3xxx/patches-4.19/210-dwc2_defaults.patch

64 lines
1.8 KiB
Diff

--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -152,6 +152,36 @@ static void dwc2_set_stm32f7_hsotg_param
p->host_perio_tx_fifo_size = 256;
}
+static void dwc2_set_cns3xxx_params(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *p = &hsotg->params;
+
+ p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; /* non-HNP/non-SRP capable */
+ p->host_dma = 1;
+ p->dma_desc_enable = 0;
+ p->speed = DWC2_SPEED_PARAM_HIGH; /* High Speed */
+ p->enable_dynamic_fifo = 1;
+ p->en_multiple_tx_fifo = 1;
+ p->host_rx_fifo_size = 658; /* 774 DWORDs */
+ p->host_nperio_tx_fifo_size = 128; /* 256 DWORDs */
+ p->host_perio_tx_fifo_size = 658; /* 512 DWORDs */
+ p->max_transfer_size = 65535,
+ p->max_packet_count = 511;
+ p->host_channels = 16;
+ p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; /* UTMI */
+ p->phy_utmi_width = 16; /* 8 bits */
+ p->phy_ulpi_ddr = 0; /* Single */
+ p->phy_ulpi_ext_vbus = 0;
+ p->i2c_enable = 0;
+ p->ulpi_fs_ls = 0;
+ p->host_support_fs_ls_low_power = 0;
+ p->host_ls_low_power_phy_clk = 0; /* 48 MHz */
+ p->ts_dline = 0;
+ p->reload_ctl = 0;
+ p->ahbcfg = 0x10;
+ p->uframe_sched = false;
+}
+
const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
@@ -820,17 +850,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg
int dwc2_init_params(struct dwc2_hsotg *hsotg)
{
+ /*
const struct of_device_id *match;
void (*set_params)(void *data);
+ */
dwc2_set_default_params(hsotg);
dwc2_get_device_properties(hsotg);
+ /*
match = of_match_device(dwc2_of_match_table, hsotg->dev);
if (match && match->data) {
set_params = match->data;
set_params(hsotg);
}
+ */
+
+ dwc2_set_cns3xxx_params(hsotg);
dwc2_check_params(hsotg);