openwrt/target/linux
David Bauer 6476148034 ath79: add support for OCEDO Raccoon
This commit adds support for the OCEDO Raccoon

SOC:	Atheros AR9344
RAM:    128MB
FLASH:  16MiB
WLAN1:  AR9344 2.4 GHz 802.11bgn 2x2
WLAN2:  AR9382 5 GHz 802.11an 2x2
INPUT:  RESET button
LED:    Power, LAN, WiFi 2.4, WiFi 5
Serial: Header Next to Black metal shield
        Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

	NOTE: The U-Boot won't boot with the serial attached.
	Boot the device without serial attached and attach it
	after 3 seconds.

Tested and working:
 - Ethernet
 - 2.4 GHz WiFi
 - 5 GHz WiFi
 - TFTP boot from ramdisk image
 - Installation via ramdisk image
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Installation seems to be possible only through booting an OpenWRT
ramdisk image.

Hold down the reset button while powering on the device. It will load a
ramdisk image named 'raccoon-uImage-initramfs-lzma.bin' from 192.168.100.8.

Note: depending on the present software, the device might also try to
pull a file called 'raccoon-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.

Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.

Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with

 > fw_setenv bootcmd run bootcmd_1

Afterwards you can reboot the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-07-08 00:04:27 +02:00
..
adm5120
adm8668
apm821xx
ar7
ar71xx ar71xx: factor out safe loader image build code 2018-07-07 21:07:40 +02:00
arc770 kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
archs38
armvirt
at91 kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
ath25
ath79 ath79: add support for OCEDO Raccoon 2018-07-08 00:04:27 +02:00
au1000
bcm53xx bcm53xx: exit if writing kernel during sysupgrade fails 2018-06-18 13:47:08 +02:00
brcm47xx kernel: bump 4.9 to 4.9.111 2018-07-04 14:16:37 +02:00
brcm63xx
brcm2708 brcm2708: platform.sh: fix tar directory directive 2018-07-07 18:19:39 +02:00
cns3xxx
gemini kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
generic kernel: move CONFIG_USB_MTU3 to generic config 2018-07-07 23:53:04 +02:00
imx6
ipq40xx kernel: bump 4.14 to 4.14.53 2018-07-04 14:16:37 +02:00
ipq806x ipq806x: fix numbering for Netgear R7800 LAN ports 2018-07-04 01:20:02 +02:00
ixp4xx
kirkwood
lantiq lantiq: enlarge AVM Fritz!Box 3370 flash 2018-07-04 01:20:02 +02:00
layerscape kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
malta
mcs814x
mediatek kernel: move CONFIG_USB_MTU3 to generic config 2018-07-07 23:53:04 +02:00
mpc85xx WDR4900v1 remove dt node for absent hw crypto. 2018-07-07 18:19:39 +02:00
mvebu kernel: bump 4.14 to 4.14.51 2018-06-26 08:57:21 +02:00
mxs
octeon octeon: Add and set CPU type Octeon+ as default 2018-06-20 15:36:02 +02:00
octeontx
omap
omap24xx
orion
oxnas kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
pistachio
ppc40x
ppc44x
ramips ramips: add support for Blueendless Kimax U35WF 2018-07-07 21:07:40 +02:00
rb532
sunxi sunxi: Enable SD block devices 2018-07-07 18:19:39 +02:00
uml
x86
xburst
zynq zynq: remove config options handled by generic 2018-07-02 07:12:48 +02:00
Makefile