RepoMirrors
/
openwrt
mirror of git://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
OpenWrt Source Repository
55,756 Commits 9 Branches 73 Tags 245 MiB
C 61.3%
Makefile 19.2%
Shell 6.8%
Roff 6.7%
Perl 2.5%
Other 3.4%
Go to file
Daniel Golle ebe2b7190b
kernel: modules: package Marvell gigE PHY driver 
Some copper SFP modules come with Marvell's 88E1xxx PHY and need this
module to function. Package it, so users can easily install this PHY
driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP.

Without marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22
sfp sfp2: sfp_add_phy failed: -22

With marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode
mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL)
mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 		2022-11-15 19:12:39 +00:00
.github CI: packages.yml: Fix usage of pre-build tools 2022-11-06 00:08:09 +01:00
LICENSES
…
config Revert "build: fix for sourcing target image config a when target is being replaced" 2022-11-09 22:28:53 +01:00
include kernel: bump 5.10 to 5.10.154 2022-11-12 17:05:13 +01:00
package kernel: modules: package Marvell gigE PHY driver 2022-11-15 19:12:39 +00:00
scripts scripts: fix dl_cleanup.py argument handling 2022-11-15 14:45:50 +01:00
target rockchip: use LZMA FIT for kernel image 2022-11-14 22:50:21 +08:00
toolchain toolchain: gcc: Remove gcc 10.x support 2022-10-23 22:53:33 +02:00
tools mac80211: remove old legacy legacy drivers 2022-11-09 20:44:28 +01:00
.gitattributes
…
.gitignore
…
BSDmakefile
…
COPYING
…
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
Makefile Makefile: fix stray \ warnings with grep-3.8 2022-09-27 16:45:08 +02:00
README.md README: add download section 2022-10-06 16:08:24 +02:00
feeds.conf.default
…
rules.mk rules.mk: move DOWNLOAD_CHECK_CERTIFICATE to include/download.mk 2022-10-05 17:49:19 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0