openwrt/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-m...

91 lines
3.0 KiB
Diff

From 14ef339843c24bf449d0f6d8bc176368c331c2c8 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 7 Dec 2015 17:29:00 +0100
Subject: [PATCH 21/53] arch: mips: ralink: add mt7688 detection
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
arch/mips/include/asm/mach-ralink/ralink_regs.h | 1 +
arch/mips/ralink/mt7620.c | 21 ++++++++++++++++-----
3 files changed, 18 insertions(+), 5 deletions(-)
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -17,6 +17,7 @@
#define SYSC_REG_CHIP_NAME0 0x00
#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_EFUSE_CFG 0x08
#define SYSC_REG_CHIP_REV 0x0c
#define SYSC_REG_SYSTEM_CONFIG0 0x10
#define SYSC_REG_SYSTEM_CONFIG1 0x14
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -24,6 +24,7 @@ enum ralink_soc_type {
MT762X_SOC_MT7620N,
MT762X_SOC_MT7621AT,
MT762X_SOC_MT7628AN,
+ MT762X_SOC_MT7688,
};
extern enum ralink_soc_type ralink_soc;
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -46,6 +46,9 @@ enum mt762x_soc_type mt762x_soc;
#define CLKCFG_FFRAC_MASK 0x001f
#define CLKCFG_FFRAC_USB_VAL 0x0003
+/* EFUSE bits */
+#define EFUSE_MT7688 0x100000
+
/* does the board have sdram or ddram */
static int dram_type;
@@ -407,7 +410,7 @@ void __init ralink_clk_init(void)
#define RINT(x) ((x) / 1000000)
#define RFRAC(x) (((x) / 1000) % 1000)
- if (mt762x_soc == MT762X_SOC_MT7628AN) {
+ if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688) {
if (xtal_rate == MHZ(40))
cpu_rate = MHZ(580);
else
@@ -451,7 +454,8 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000c00.uartlite", periph_rate);
ralink_clk_add("10180000.wmac", xtal_rate);
- if (IS_ENABLED(CONFIG_USB)) {
+ if (IS_ENABLED(CONFIG_USB) &&
+ (mt762x_soc == MT762X_SOC_MT7620A || mt762x_soc == MT762X_SOC_MT7620N)) {
/*
* When the CPU goes into sleep mode, the BUS clock will be too low for
* USB to function properly
@@ -548,8 +552,15 @@ void prom_soc_init(struct ralink_soc_inf
soc_info->compatible = "ralink,mt7620n-soc";
}
} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- mt762x_soc = MT762X_SOC_MT7628AN;
- name = "MT7628AN";
+ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+ if (efuse & EFUSE_MT7688) {
+ mt762x_soc = MT762X_SOC_MT7688;
+ name = "MT7688";
+ } else {
+ mt762x_soc = MT762X_SOC_MT7628AN;
+ name = "MT7628AN";
+ }
soc_info->compatible = "ralink,mt7628an-soc";
} else {
panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
@@ -582,7 +593,7 @@ void prom_soc_init(struct ralink_soc_inf
pr_info("Digital PMU set to %s control\n",
(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
- if (mt762x_soc == MT762X_SOC_MT7628AN)
+ if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688)
rt2880_pinmux_data = mt7628an_pinmux_data;
else
rt2880_pinmux_data = mt7620a_pinmux_data;