Piotr Dymacz 5dfa89be99 ath79: add support for Netgear R6100 ... Netgear R6100 is a dual-band Wi-Fi 5 (AC1200) router based on Qualcomm Atheros (AR9344 + QCA9882) platform. Support for this device was first introduced in 15f6f67d18 (ar71xx). FCC ID: PY312400225. Specifications: - Atheros AR9344 (560 MHz) - 128 MB of RAM (DDR2) - 128 MB of flash (parallel NAND) - 2T2R 2.4 GHz Wi-Fi (AR9344) - 2T2R 5 GHz Wi-Fi (QCA9882) - 5x 10/100 Mbps Ethernet (AR9344) - 4x internal antenna - 1x USB 2.0 (GPIO-controlled power) - 6x LED, 3x button (reset, Wi-Fi, WPS) - UART (4-pin, 2.54 mm pitch) header on PCB - 1x mechanical power switch - DC jack for main power input (12 V) WARNING: sysupgrade from older stable releases is not possible, fresh installation (via vendor's GUI or TFTP based recovery) is required. Reason for that is increased kernel partition size. Installation: Use the 'factory' image under vendor's GUI or via TFTP U-Boot recovery. You can use the 'nmrpflash' tool at a boot time, before kernel is loaded or start it manually by pressing the 'reset' button for ~20 seconds from powering up the device (U-Boot will start TFTP server on 192.168.1.1, use TFTP client to send the image). Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2021-11-03 12:45:40 +01:00
..
bin	…
lzma-loader	…
Makefile	ath79: lzma-loader: fix & re-enable per-board CONFIG_BOARD_DEV	2021-10-22 21:25:18 +02:00
common-buffalo.mk	…
common-mikrotik.mk	…
common-netgear.mk	…
common-senao.mk	…
common-tp-link.mk	…
common-yuncore.mk	…
generic-tp-link.mk	…
generic-ubnt.mk	…
generic.mk	ath79: add support for Letv LBA-047-CH	2021-11-01 00:15:09 +01:00
mikrotik.mk	ath79: mikrotik: enable SFP on RB921GS-5HPacD (mANTBox 15s)	2021-10-31 21:24:47 +01:00
nand.mk	ath79: add support for Netgear R6100	2021-11-03 12:45:40 +01:00
tiny-netgear.mk	…
tiny-tp-link.mk	…
tiny.mk	…